The 2011 Peugeot Manager has 43 engine parts with verified fitment on this page — 20 part types and 7 brands, covering both the 2.2L L4 DIESEL Turbocharged and the 3.0L L4 DIESEL Turbocharged. Each part includes a manufacturer part number and application notes.
The engine on the 2011 Peugeot Manager covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. The largest groups are Cylinder Head Gasket (6 parts), Crankshaft Seal (4 parts) and Valve Stem Seal (4 parts). The other 17 part types cover the remaining 29 parts.
The 2011 Peugeot Manager was sold with both the 2.2L L4 DIESEL Turbocharged and the 3.0L L4 DIESEL Turbocharged. 3 parts fit every engine; the other 40 are engine-specific. Each part shows which engine(s) it fits.
7 brands supply engine parts for the 2011 Peugeot Manager, led by AJUSA (33 parts), ELRING (3 parts) and WESTAR (2 parts), plus 4 more brands. Quality grades include Standard Replacement and Economy.
Each part number listed for the 2011 Peugeot Manager opens a page with every vehicle that part fits.
Conversion / Lower Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 2.2L L4 DIESEL Turbocharged | 54162500 | 🇲🇽 MX | View on Amazon | |
| AJUSA Fits: 3.0L L4 DIESEL Turbocharged | 54162300 | 🇲🇽 MX | View on Amazon |
This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
AJUSA supplies both parts for the 2011 Peugeot Manager.
This group includes AJUSA 54162500 and AJUSA 54162300.
Crankshaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 2.2L L4 DIESEL Turbocharged | 15075700 | 🇲🇽 MX | Front/13.5Clockwise | View on Amazon |
| AJUSA Fits: 2.2L L4 DIESEL Turbocharged | 71001800 | 🇲🇽 MX | Rear | View on Amazon |
| AJUSA Fits: 3.0L L4 DIESEL Turbocharged | 15094300 | 🇲🇽 MX | FrontClockwise | View on Amazon |
| AJUSA Fits: 3.0L L4 DIESEL Turbocharged | 15094400 | 🇲🇽 MX | RearCounter Clockwise | View on Amazon |
This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
4 Crankshaft Seal parts for the 2011 Peugeot Manager come from AJUSA.
This group includes AJUSA 15075700, AJUSA 71001800 and AJUSA 15094300 and the remaining parts above.
Cylinder Head Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 2.2L L4 DIESEL Turbocharged | 81043800 | 🇲🇽 MX | View on Amazon | |
| AJUSA Fits: 3.0L L4 DIESEL Turbocharged | 81043700 | 🇲🇽 MX | View on Amazon |
This table covers the bolts that clamp the cylinder head to the block.
AJUSA supplies both parts for the 2011 Peugeot Manager.
Part numbers include AJUSA 81043800 and AJUSA 81043700.
Cylinder Head Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 2.2L L4 DIESEL Turbocharged | 10185300 | 🇲🇽 MX | Multi Layered SteelDoes Not Include Cylinder Head Gasket | View on Amazon |
| AJUSA Fits: 2.2L L4 DIESEL Turbocharged | 10185310 | 🇲🇽 MX | Multi Layered SteelDoes Not Include Cylinder Head Gasket | View on Amazon |
| AJUSA Fits: 2.2L L4 DIESEL Turbocharged | 10185320 | 🇲🇽 MX | Multi Layered SteelDoes Not Include Cylinder Head Gasket | View on Amazon |
| AJUSA Fits: 3.0L L4 DIESEL Turbocharged | 10185720 | 🇲🇽 MX | Multi Layered Steel | View on Amazon |
| AJUSA Fits: 3.0L L4 DIESEL Turbocharged | 10185710 | 🇲🇽 MX | Multi Layered Steel | View on Amazon |
| AJUSA Fits: 3.0L L4 DIESEL Turbocharged | 10185700 | 🇲🇽 MX | Multi Layered Steel | View on Amazon |
This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
AJUSA supplies the 6 Cylinder Head Gasket parts for the 2011 Peugeot Manager.
Listed part numbers: AJUSA 10185300, AJUSA 10185310 and AJUSA 10185320, plus the other parts above.
Cylinder Head Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 2.2L L4 DIESEL Turbocharged | 53028600 | 🇲🇽 MX | Does Not Include Cylinder Head Gasket | View on Amazon |
| AJUSA Fits: 3.0L L4 DIESEL Turbocharged | 52269900 | 🇲🇽 MX | Multi Layered Steel | View on Amazon |
| ELRING Fits: all 2011 Manager engines | 429170 | 🇲🇽 MX | with valve stem sealswithout cylinder head gasket | View on Amazon |
This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
3 Cylinder Head Gasket Set parts are listed for the 2011 Peugeot Manager, from AJUSA and ELRING. 1 part fits every engine; the other 2 are engine-specific.
Listed part numbers: AJUSA 53028600, AJUSA 52269900 and ELRING 429170.
Engine Kit Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 2.2L L4 DIESEL Turbocharged | 51034500 | 🇲🇽 MX | Does Not Include Cylinder Head Gasket | View on Amazon |
| AJUSA Fits: 3.0L L4 DIESEL Turbocharged | 50280800 | 🇲🇽 MX | Multi Layered Steel | View on Amazon |
| ELRING Fits: all 2011 Manager engines | 867800 | 🇲🇽 MX | with valve stem seals, without cylinder head gasket, without integrated shaft seal | View on Amazon |
This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
3 Engine Kit Gasket Set parts are listed for the 2011 Peugeot Manager, from AJUSA and ELRING. 1 part fits every engine; the other 2 are engine-specific.
This group includes AJUSA 51034500, AJUSA 50280800 and ELRING 867800.
Intake Manifold Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 3.0L L4 DIESEL Turbocharged | 13226300 | 🇲🇽 MX | View on Amazon |
This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
One part is listed for the 2011 Peugeot Manager — AJUSA 13226300.
Intake Plenum Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 2.2L L4 DIESEL Turbocharged | 13169800 | 🇲🇽 MX | View on Amazon |
This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
This group shows a single part: AJUSA 13169800.
Motor Mount
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WESTAR Fits: 3.0L L4 DIESEL Turbocharged | EM4302 | 🇲🇽 MX | Front Right | View on Amazon |
This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes.
This group shows a single part: WESTAR EM4302.
Oil
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| VALVOLINE Fits: 3.0L L4 DIESEL Turbocharged | 797977 | 🇲🇽 MX | High Mileage with Max Life Technology Synthetic Blend SAE 10W-401 Quart | View on Amazon |
| VALVOLINE Fits: 3.0L L4 DIESEL Turbocharged | 881148 | 🇲🇽 MX | High Mileage with Max Life Technology Synthetic Blend SAE 10W-40Easy Pour 5 Quart | View on Amazon |
This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable.
2 Oil parts for the 2011 Peugeot Manager come from VALVOLINE.
This group includes VALVOLINE 797977 and VALVOLINE 881148.
Oil Cooler Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 3.0L L4 DIESEL Turbocharged | 77014000 | 🇲🇽 MX | View on Amazon |
This table covers the gaskets that seal the Oil Cooler. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
One part is listed for the 2011 Peugeot Manager — AJUSA 77014000.
Oil Drain Plug Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 3.0L L4 DIESEL Turbocharged | 22010300 | 🇲🇽 MX | View on Amazon |
This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
One part is listed for the 2011 Peugeot Manager — AJUSA 22010300.
Oil Filter
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| VARIOUS MFR Fits: 3.0L L4 DIESEL Turbocharged | PG9953 | 🇲🇽 MX | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| HASTINGS / BALDWIN Fits: 3.0L L4 DIESEL Turbocharged | B7428 | 🇲🇽 MX | View on Amazon | |
| MANN Fits: 3.0L L4 DIESEL Turbocharged | W9009 | 🇲🇽 MX | View on Amazon |
This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.
3 Oil Filter parts for the 2011 Peugeot Manager come from 3 brands — VARIOUS MFR, HASTINGS / BALDWIN and MANN.
The Economy section lists 1 option from VARIOUS MFR — the catalog's value-priced group. VARIOUS MFR PG9953 is listed in this group.
In the Standard Replacement grade, HASTINGS / BALDWIN and MANN supply 2 parts: built to original-equipment specification. A representative part number is HASTINGS / BALDWIN B7428.
Listed part numbers: VARIOUS MFR PG9953, HASTINGS / BALDWIN B7428 and MANN W9009.
Oil Pan Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 2.2L L4 DIESEL Turbocharged | 59014100 | 🇲🇽 MX | View on Amazon | |
| AJUSA Fits: 3.0L L4 DIESEL Turbocharged | 14095600 | 🇲🇽 MX | View on Amazon |
This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
2 Oil Pan Gasket parts for the 2011 Peugeot Manager come from AJUSA.
Listed part numbers: AJUSA 59014100 and AJUSA 14095600.
Torque Strut Mount
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WESTAR Fits: 3.0L L4 DIESEL Turbocharged | EM4300 | 🇲🇽 MX | Rear | View on Amazon |
This table covers the Torque Strut mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes.
One part is listed for the 2011 Peugeot Manager — WESTAR EM4300.
Turbocharger Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 2.2L L4 DIESEL Turbocharged | JTC11633 | 🇲🇽 MX | Mounting Gasket Set | View on Amazon |
| AJUSA Fits: 3.0L L4 DIESEL Turbocharged | JTC12190 | 🇲🇽 MX | Mounting Gasket Set | View on Amazon |
This table covers the gaskets that seal the Turbocharger. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
AJUSA supplies both parts for the 2011 Peugeot Manager.
Listed part numbers: AJUSA JTC11633 and AJUSA JTC12190.
Turbocharger Mounting Hardware
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Fits: all 2011 Manager engines | 430140 | 🇲🇽 MX | with gaskets/sealswith Mounting Manual,with Bolts/Screws | View on Amazon |
This table covers the fasteners that mount the turbocharger.
One part is listed for the 2011 Peugeot Manager — ELRING 430140.
Valve Cover Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 2.2L L4 DIESEL Turbocharged | 11088000 | 🇲🇽 MX | View on Amazon | |
| AJUSA Fits: 3.0L L4 DIESEL Turbocharged | 11116900 | 🇲🇽 MX | View on Amazon |
This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
2 Valve Cover Gasket parts for the 2011 Peugeot Manager come from AJUSA.
Part numbers include AJUSA 11088000 and AJUSA 11116900.
Valve Lifter
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 3.0L L4 DIESEL Turbocharged | 85010400 | 🇲🇽 MX | View on Amazon |
This table covers the lifters / tappets that transfer cam motion to the valves.
This group shows a single part: AJUSA 85010400.
Valve Stem Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 2.2L L4 DIESEL Turbocharged | 12018500 | 🇲🇽 MX | 5.5 x 12 x 18.5 | View on Amazon |
| AJUSA Fits: 2.2L L4 DIESEL Turbocharged | 57036600 | 🇲🇽 MX | View on Amazon | |
| AJUSA Fits: 3.0L L4 DIESEL Turbocharged | 12021900 | 🇲🇽 MX | 5 x 10.5 x 19 | View on Amazon |
| AJUSA Fits: 3.0L L4 DIESEL Turbocharged | 57042200 | 🇲🇽 MX | View on Amazon |
This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
4 Valve Stem Seal parts for the 2011 Peugeot Manager come from AJUSA.
Listed part numbers: AJUSA 12018500, AJUSA 57036600 and AJUSA 12021900, plus the other parts above.
Buying Engine Parts for a 2011 Peugeot Manager
On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.
- Match the engine first. Some engine parts fit every engine; others are engine-specific. Each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Cylinder Head Gasket and Crankshaft Seal .
Frequently Asked Questions
How many engine parts fit the 2011 Peugeot Manager?
Our catalog currently lists 43 engine parts for the 2011 Peugeot Manager across 20 subcategories and 7 brands, covering both the 2.2L L4 DIESEL Turbocharged and the 3.0L L4 DIESEL Turbocharged. Each part is matched to the engine(s) it fits.
Do engine parts differ between 2011 Peugeot Manager engines?
Some do. 3 parts fit every engine; the other 40 are engine-specific. Each row (and the filter at the top) shows which. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of engine problems on a 2011 Peugeot Manager?
Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What oil viscosity is listed for the 2011 Peugeot Manager?
Oil rows on this page include SAE 10W-40. Confirm the engine and the weight on the filler cap before you buy — high-mileage and standard fills can differ.
What should I replace at the same time?
Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2011 Peugeot Manager was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2011 Peugeot Manager?
First match the engine — each row shows which engine(s) the part fits. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2011 Peugeot Manager
Engine Parts for Other Peugeot Manager Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.