8 Engine parts are listed for the 2018 Peugeot Manager, in 4 part types, covering the 2.2L L4 DIESEL Turbocharged engine. Each one has a brand, a manufacturer part number and notes that say where it fits.
On the 2018 Peugeot Manager, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. 7 parts of the 8 listed are Oil Filter (3 parts), Crankshaft Seal (2 parts) and Turbocharger Mounting Hardware (2 parts). The other 1 part type covers the remaining 1 part.
Every part on this page is matched to the 2.2L L4 DIESEL Turbocharged — the only engine offered in the 2018 Peugeot Manager.
The most listed brands for 2018 Peugeot Manager engine parts are ELRING (3 parts), ACDELCO (1 part) and SCHAEFFLER (1 part), plus 3 more brands.
Each part number listed for the 2018 Peugeot Manager opens a page with every vehicle that part fits.
Crankshaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACDELCO | 710237 | 🇺🇸 US 🇨🇦 CA | Gold | View on Amazon |
| SCHAEFFLER | SS3894 | 🇲🇽 MX | Rear3.54" I:D X 4.1" O.D. X 0.43" Width | View on Amazon |
This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
2 Crankshaft Seal parts are listed for the 2018 Peugeot Manager, from ACDELCO and SCHAEFFLER.
This group includes ACDELCO 710237 and SCHAEFFLER SS3894.
Cylinder Head Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING | 573380 | 🇲🇽 MX | without Cylinder Head Gasketwith valve stem seals | View on Amazon |
This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
This group shows a single part: ELRING 573380.
Oil Filter
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE | OX1712D | 🇲🇽 MX | Cartridge | View on Amazon |
| MANN | HU7162X | 🇲🇽 MX | View on Amazon | |
| WIX | WL7305 | 🇲🇽 MX | View on Amazon |
This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.
3 Oil Filter parts are listed for the 2018 Peugeot Manager, from MAHLE / CLEVITE, MANN and WIX.
Part numbers include MAHLE / CLEVITE OX1712D, MANN HU7162X and WIX WL7305.
Turbocharger Mounting Hardware
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING | 584560 | 🇲🇽 MX | StudThread Size: M8X1,25x25 | View on Amazon |
| ELRING | 577730 | 🇲🇽 MX | with gaskets/sealswith Mounting Manual,with Bolts/Screws | View on Amazon |
This table covers the fasteners that mount the turbocharger.
2 Turbocharger Mounting Hardware parts for the 2018 Peugeot Manager come from ELRING.
Part numbers include ELRING 584560 and ELRING 577730.
Buying Engine Parts for a 2018 Peugeot Manager
On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.
- Confirm you have the 2.2L L4 DIESEL Turbocharged engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Oil Filter and Crankshaft Seal .
Frequently Asked Questions
How many engine parts fit the 2018 Peugeot Manager?
Our catalog currently lists 8 engine parts for the 2018 Peugeot Manager across 4 subcategories and 6 brands, covering the 2.2L L4 DIESEL Turbocharged engine. Each part is matched to the engine(s) it fits.
What are the signs of engine problems on a 2018 Peugeot Manager?
Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2018 Peugeot Manager was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2018 Peugeot Manager?
Every part on this page is matched to the 2.2L L4 DIESEL Turbocharged engine. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2018 Peugeot Manager
Engine Parts for Other Peugeot Manager Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.