2012 Peugeot 207 Electrical Connector Parts

Engine:

Showing parts for every engine. Select an engine to see only what fits.

This page lists 6 electrical connector parts for the 2012 Peugeot 207, across 4 part types, covering both the 1.6L L4 and the 1.6L L4 Turbocharged. Every part shows its brand, manufacturer part number and fitment notes.

On the 2012 Peugeot 207, the connector system supplies the pigtails and connector bodies that terminate the vehicle harness at lamps, sensors and modules. 5 parts of the 6 listed are Fuel Injector Connector (3 parts), Ignition Coil Connector (1 part) and Knock / Detonation Sensor Connector (1 part). The other 1 part type covers the remaining 1 part.

Fuel Injector Connector

Brand Part Number Markets Notes Buy
STANDARD MOTOR PRODUCTS Fits: 1.6L L4 S2330
🇲🇽 MX
Color Code Gray and Whitewith 2 Female Terminals
View on
Amazon
STANDARD MOTOR PRODUCTS Fits: 1.6L L4 Turbocharged HP4325
🇲🇽 MX
HandypackConnector Shape: Rectangle
Fitment notes — STANDARD MOTOR PRODUCTS HP4325
HandypackConnector Shape: RectangleHarness Length16-1/2 "Terminal Type: Blade
Color Code Black and Orangewith 2 Female Terminals
View on
Amazon
STANDARD MOTOR PRODUCTS Fits: 1.6L L4 Turbocharged S1024
🇲🇽 MX
Connector Shape: RectangleHarness Length
Fitment notes — STANDARD MOTOR PRODUCTS S1024
Connector Shape: RectangleHarness Length16-1/2 "Terminal Type: Blade
Color Code Black and Orangewith 2 Female Terminals
View on
Amazon

This table covers the harness connectors at the Fuel Injector. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock.

Ignition Coil Connector

Brand Part Number Markets Notes Buy
STANDARD MOTOR PRODUCTS Fits: all 2012 207 engines S3070
🇲🇽 MX
with Individual Coil(s)
View on
Amazon

This table covers the harness connectors at the Ignition Coil. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock.

Knock / Detonation Sensor Connector

Brand Part Number Markets Notes Buy
STANDARD MOTOR PRODUCTS Fits: 1.6L L4 S3136
🇲🇽 MX
Terminal Gender: Female
View on
Amazon

This table covers the harness connectors at the Knock / Detonation Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock.

Oil Pressure Sender / Switch Connector

Brand Part Number Markets Notes Buy
STANDARD MOTOR PRODUCTS Fits: all 2012 207 engines S3307
🇲🇽 MX
View on
Amazon

This table covers the harness connectors at the Oil Pressure Sender / Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock.

Buying Electrical Connector Parts for a 2012 Peugeot 207

On this vehicle, the connector system supplies the pigtails and connector bodies that terminate the vehicle harness at lamps, sensors and modules.

  • Match the engine first. Some electrical connector parts fit every engine; others are engine-specific. Each row shows which engine(s) it fits.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, use heat-shrink crimp connectors rather than twist-and-tape for any pigtail splice, especially outside the cabin.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Fuel Injector Connector and Ignition Coil Connector .

Frequently Asked Questions

How many electrical connector parts fit the 2012 Peugeot 207?

Our catalog currently lists 6 electrical connector parts for the 2012 Peugeot 207 across 4 subcategories and 1 brand, covering both the 1.6L L4 and the 1.6L L4 Turbocharged. Each part is matched to the engine(s) it fits.

Do electrical connector parts differ between 2012 Peugeot 207 engines?

Some do. 2 parts fit every engine; the other 4 are engine-specific. Each row (and the filter at the top) shows which. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.

What are the signs of electrical connector problems on a 2012 Peugeot 207?

Common symptoms include intermittent faults that move when the harness is wiggled, green corrosion inside a plug, or melted connector housings near heat sources. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What should I replace at the same time?

Where labor overlaps, use heat-shrink crimp connectors rather than twist-and-tape for any pigtail splice, especially outside the cabin.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2012 Peugeot 207 was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 2012 Peugeot 207?

First match the engine — each row shows which engine(s) the part fits. Then match the connector by terminal count and keyway, not just appearance — many families look identical but will not lock. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 2012 Peugeot 207

Electrical Connector Parts for Other Peugeot 207 Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.