10 Ignition parts are listed for the 2012 Peugeot 308, in 3 part types, covering the 1.6L L4 Turbocharged engine. Each one has a brand, a manufacturer part number and notes that say where it fits.
The ignition system on the 2012 Peugeot 308 delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules. All 10 listed parts are Ignition Coil (6 parts), Crankshaft Position Sensor (2 parts) and Spark Plug / Ignition Coil Boot (2 parts).
The 2012 Peugeot 308 came with a single engine, the 1.6L L4 Turbocharged, and every part is verified against it.
7 brands supply ignition parts for the 2012 Peugeot 308, led by STANDARD MOTOR PRODUCTS (4 parts), WALKER PRODUCTS (1 part) and WELLS (1 part), plus 4 more brands. Quality grades include Economy, Standard Replacement and Premium.
A "Popular" badge means the source catalog flagged the part as frequently chosen for the 2012 Peugeot 308. 2 parts have it, including FVP UF667F (Ignition Coil) and SKP SKIC120 (Ignition Coil). Each part number opens a page with every vehicle that part fits.
Crankshaft Position Sensor
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WALKER PRODUCTS | 2351546 | 🇲🇽 MX | Sensor Only | View on Amazon |
| WELLS | 5S16364 | 🇲🇽 MX | Mounting Bracket Included: No | View on Amazon |
This table covers the sensors that report crankshaft position and engine speed. Typical signs include a stall, a no-start, or a code for cam or crank correlation. Check the connector and the reluctor gap before replacing the sensor.
2 Crankshaft Position Sensor parts for the 2012 Peugeot 308 come from 2 brands — WALKER PRODUCTS and WELLS.
Listed part numbers: WALKER PRODUCTS 2351546 and WELLS 5S16364.
Ignition Coil
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FVP Popular | UF667F | 🇲🇽 MX | View on Amazon | |
| SKP Popular | SKIC120 | 🇲🇽 MX | View on Amazon | |
| HOLSTEIN | 2IGC0102 | 🇲🇽 MX | View on Amazon | |
| STANDARD MOTOR PRODUCTS | UF667T | 🇲🇽 MX | T-Series | View on Amazon |
Premium
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS | UF667 | 🇲🇽 MX | Blue Streak | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| UNITED MOTOR PRODUCTS | COP585 | 🇲🇽 MX | with Metal Body | View on Amazon |
This table covers the coils that fire each spark plug. Typical signs include a misfire that follows one cylinder, a snap in damp weather, or a coil that is swollen or cracked. Swap a suspect coil with a neighbor to confirm, then replace boots that tore on the way off.
6 Ignition Coil parts for the 2012 Peugeot 308 come from 5 brands — STANDARD MOTOR PRODUCTS, FVP, SKP and 2 other brands. The "Popular" part is FVP UF667F.
The Economy section lists 4 options from FVP, SKP, HOLSTEIN and 1 other brand — the catalog's value-priced group. FVP UF667F is listed in this group.
In the Premium grade, STANDARD MOTOR PRODUCTS supplies 1 part: a step above OE specification in materials, tolerances or warranty terms. A representative part number is STANDARD MOTOR PRODUCTS UF667.
In the Standard Replacement grade, UNITED MOTOR PRODUCTS supplies 1 part: built to original-equipment specification. A representative part number is UNITED MOTOR PRODUCTS COP585.
Part numbers include FVP UF667F, SKP SKIC120 and HOLSTEIN 2IGC0102, among others listed above.
Spark Plug / Ignition Coil Boot
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS | 19911 | 🇲🇽 MX | Federal Wire | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS | SPP201E | 🇲🇽 MX | View on Amazon |
This table covers the silicone and rubber boots that insulate the coil-to-plug spark path. Typical signs include a misfire in the rain, carbon tracking on the boot, or a snap when you pop the coil off. Replace boots as a set on a high-mileage engine; one cracked boot will take the coil with it.
2 Spark Plug / Ignition Coil Boot parts for the 2012 Peugeot 308 come from STANDARD MOTOR PRODUCTS.
The Economy section: 1 option from STANDARD MOTOR PRODUCTS. STANDARD MOTOR PRODUCTS 19911 is listed in this group.
Standard Replacement: 1 part, from STANDARD MOTOR PRODUCTS. A representative part number is STANDARD MOTOR PRODUCTS SPP201E.
Listed part numbers: STANDARD MOTOR PRODUCTS 19911 and STANDARD MOTOR PRODUCTS SPP201E.
Buying Ignition Parts for a 2012 Peugeot 308
On this vehicle, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules.
- Confirm you have the 1.6L L4 Turbocharged engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Ignition Coil and Crankshaft Position Sensor .
Frequently Asked Questions
How many ignition parts fit the 2012 Peugeot 308?
Our catalog currently lists 10 ignition parts for the 2012 Peugeot 308 across 3 subcategories and 7 brands, covering the 1.6L L4 Turbocharged engine. Each part is matched to the engine(s) it fits.
What are the signs of ignition problems on a 2012 Peugeot 308?
Common symptoms include misfires under load, rough idle, flashing check-engine light, or poor starting in damp weather. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2012 Peugeot 308 was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2012 Peugeot 308?
Every part on this page is matched to the 1.6L L4 Turbocharged engine. Then gap matters even on “pre-gapped” plugs — verify against spec, and replace coil boots when they come off a high-mileage engine. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2012 Peugeot 308
Ignition Parts for Other Peugeot 308 Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.