2012 Peugeot Manager Engine Parts

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Conversion / Lower Gasket Set parts for the 2012 Peugeot Manager come from AJUSA.

This group includes AJUSA 54162500 and AJUSA 54162300.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

AJUSA supplies the 4 Crankshaft Seal parts for the 2012 Peugeot Manager.

This group includes AJUSA 15075700, AJUSA 71001800 and AJUSA 15094300 and the remaining parts above.

This table covers the bolts that clamp the cylinder head to the block. Read more

2 Cylinder Head Bolt parts for the 2012 Peugeot Manager come from AJUSA.

Part numbers include AJUSA 81043800 and AJUSA 81043700.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Cylinder Head Gasket parts for the 2012 Peugeot Manager come from AJUSA.

This group includes AJUSA 10185300, AJUSA 10185310 and AJUSA 10185320 and the remaining parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Cylinder Head Gasket Set parts for the 2012 Peugeot Manager come from 2 brands — AJUSA and ELRING. 1 part fits every engine; the other 2 are engine-specific.

Part numbers include AJUSA 53028600, AJUSA 52269900 and ELRING 429170.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Engine Kit Gasket Set parts for the 2012 Peugeot Manager come from 2 brands — AJUSA and ELRING. 1 part fits every engine; the other 2 are engine-specific.

Part numbers include AJUSA 51034500, AJUSA 50280800 and ELRING 867800.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: AJUSA 13226300.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2012 Peugeot Manager — AJUSA 13169800.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

One part is listed for the 2012 Peugeot Manager — WESTAR EM4302.

This table covers the gaskets that seal the Oil Cooler. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: AJUSA 77014000.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: AJUSA 22010300.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

7 Oil Filter parts are listed for the 2012 Peugeot Manager, from MANN, FVP, PRO-TEC and 3 other brands. WIX 57512 carries the "Popular" badge.

In the Economy grade, FVP, PRO-TEC, PUROLATOR and 1 other brand supply 4 parts: the catalog's value-priced group. A representative part number is FVP G7512.

The Standard Replacement section lists 3 options from MANN and WIX — built to original-equipment specification. WIX 57512 is listed in this group.

Listed part numbers: WIX 57512, FVP G7512 and PRO-TEC PXL57512, plus the other parts above.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

AJUSA supplies both parts for the 2012 Peugeot Manager.

This group includes AJUSA 59014100 and AJUSA 14095600.

This table covers the Torque Strut mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

This group shows a single part: WESTAR EM4300.

This table covers the gaskets that seal the Turbocharger. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Turbocharger Gasket parts for the 2012 Peugeot Manager come from AJUSA.

Part numbers include AJUSA JTC11633 and AJUSA JTC12190.

This table covers the fasteners that mount the turbocharger. Read more

This group shows a single part: ELRING 430140.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

AJUSA supplies both parts for the 2012 Peugeot Manager.

This group includes AJUSA 11088000 and AJUSA 11116900.

This table covers the lifters / tappets that transfer cam motion to the valves. Read more

One part is listed for the 2012 Peugeot Manager — AJUSA 85010400.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

AJUSA supplies the 4 Valve Stem Seal parts for the 2012 Peugeot Manager.

This group includes AJUSA 12018500, AJUSA 57036600 and AJUSA 12021900 and the remaining parts above.