2013 Peugeot Manager Engine Parts

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

AJUSA supplies both parts for the 2013 Peugeot Manager.

Listed part numbers: AJUSA 54162500 and AJUSA 54175000.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Crankshaft Seal parts for the 2013 Peugeot Manager come from AJUSA.

Part numbers include AJUSA 15075700, AJUSA 71001800 and AJUSA 15094300, among others listed above.

This table covers the bolts that clamp the cylinder head to the block. Read more

AJUSA supplies both parts for the 2013 Peugeot Manager.

Part numbers include AJUSA 81043800 and AJUSA 81043700.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

AJUSA supplies the 6 Cylinder Head Gasket parts for the 2013 Peugeot Manager.

Listed part numbers: AJUSA 10185300, AJUSA 10185310 and AJUSA 10185320, plus the other parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Cylinder Head Gasket Set parts are listed for the 2013 Peugeot Manager, from AJUSA and ELRING. 1 part fits every engine; the other 2 are engine-specific.

This group includes AJUSA 53028600, AJUSA 52286800 and ELRING 429170.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Engine Kit Gasket Set parts are listed for the 2013 Peugeot Manager, from AJUSA and ELRING. 1 part fits every engine; the other 2 are engine-specific.

This group includes AJUSA 51034500, AJUSA 50306600 and ELRING 867800.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2013 Peugeot Manager — AJUSA 13226300.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: AJUSA 13169800.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

This group shows a single part: WESTAR EM4302.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2013 Peugeot Manager — AJUSA 22010300.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

7 Oil Filter parts for the 2013 Peugeot Manager come from 6 brands — MANN, FVP, PRO-TEC and 3 other brands. The "Popular" part is WIX 57512.

The Economy section lists 4 options from FVP, PRO-TEC, PUROLATOR and 1 other brand — the catalog's value-priced group. FVP G7512 is listed in this group.

In the Standard Replacement grade, MANN and WIX supply 3 parts: built to original-equipment specification. A representative part number is WIX 57512.

Part numbers include WIX 57512, FVP G7512 and PRO-TEC PXL57512, among others listed above.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Pan Gasket parts for the 2013 Peugeot Manager come from AJUSA.

Part numbers include AJUSA 59014100 and AJUSA 14095600.

This table covers the Torque Strut mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

One part is listed for the 2013 Peugeot Manager — WESTAR EM4300.

This table covers the gaskets that seal the Turbocharger. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

AJUSA supplies both parts for the 2013 Peugeot Manager.

Listed part numbers: AJUSA JTC11633 and AJUSA JTC12004.

This table covers the fasteners that mount the turbocharger. Read more

One part is listed for the 2013 Peugeot Manager — ELRING 430140.

This table covers the Turbocharger Oil lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early. Read more

This group shows a single part: AJUSA OP10946.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Valve Cover Gasket parts for the 2013 Peugeot Manager come from AJUSA.

Listed part numbers: AJUSA 11088000 and AJUSA 11116900.

This table covers the lifters / tappets that transfer cam motion to the valves. Read more

This group shows a single part: AJUSA 85020100.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Valve Stem Seal parts for the 2013 Peugeot Manager come from AJUSA.

Listed part numbers: AJUSA 12018500, AJUSA 57036600 and AJUSA 12021900, plus the other parts above.