2016 Peugeot 208 GT Engine Parts

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

3 Connecting Rod Bearing parts for the 2016 Peugeot 208 GT come from KING ENGINE BEARINGS.

The High Performance section lists 1 option from KING ENGINE BEARINGS — engineered beyond original-equipment specification. KING ENGINE BEARINGS CR4633XP is listed in this group.

In the Standard Replacement grade, KING ENGINE BEARINGS supplies 1 part: built to original-equipment specification. A representative part number is KING ENGINE BEARINGS CR4633SM.

1 further part sits outside the graded sections, with the same engine-level match.

Listed part numbers: KING ENGINE BEARINGS CR4633XP, KING ENGINE BEARINGS CR4633SM and KING ENGINE BEARINGS CR4633XPX.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

This group shows a single part: AJUSA 54266200.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

KING ENGINE BEARINGS supplies the 3 Crankshaft Main Bearing parts for the 2016 Peugeot 208 GT.

High Performance: 2 parts, from KING ENGINE BEARINGS. A representative part number is KING ENGINE BEARINGS MB5758XP.

The Standard Replacement section: 1 option from KING ENGINE BEARINGS. KING ENGINE BEARINGS MB5758SI is listed in this group.

Listed part numbers: KING ENGINE BEARINGS MB5758XP, KING ENGINE BEARINGS MB5758XPX and KING ENGINE BEARINGS MB5758SI.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

AJUSA supplies both parts for the 2016 Peugeot 208 GT.

Listed part numbers: AJUSA 15094500 and AJUSA 15094200.

This table covers the bolts that clamp the cylinder head to the block. Read more

This group shows a single part: AJUSA 81044100.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: AJUSA 10187100.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

This group shows a single part: AJUSA 52506500.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

This group shows a single part: AJUSA 50456300.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: AJUSA 24036700.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: AJUSA 18001200.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

7 Oil Filter parts are listed for the 2016 Peugeot 208 GT, from FVP, PRO-TEC, PUROLATOR and 4 other brands. MANN HU71151X carries the "Popular" badge.

In the Economy grade, FVP, PRO-TEC, PUROLATOR and 1 other brand supply 4 parts: the catalog's value-priced group. A representative part number is FVP G7512.

The Standard Replacement section: 3 options from MANN, WIX and MAHLE / CLEVITE. MANN HU71151X is listed in this group.

This group includes MANN HU71151X, FVP G7512 and PRO-TEC PXL57512 and the remaining parts above.

This table covers the chains that drive the oil pump. Read more

This group shows a single part: INA ZC0237.

This table covers the timing chains that keep the cams in time with the crank. Read more

2 Timing Chain parts for the 2016 Peugeot 208 GT come from INA.

Listed part numbers: INA ZCC774 and INA ZC0170.

This table covers kits that group a timing chain with the related tensioners and guides. Read more

3 Timing Chain & Component Kit parts are listed for the 2016 Peugeot 208 GT, from INA and MARELLI.

Part numbers include INA ZC0104K, INA ZC0105K and MARELLI MCK0132.

This table covers the Turbocharger Boost solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

One part is listed for the 2016 Peugeot 208 GT — PIERBURG 701777190.

This table covers the gaskets that seal the Turbocharger. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Turbocharger Gasket parts for the 2016 Peugeot 208 GT come from AJUSA.

This group includes AJUSA 01207600 and AJUSA JTC11858.

This table covers the Turbocharger Oil lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early. Read more

AJUSA supplies both parts for the 2016 Peugeot 208 GT.

This group includes AJUSA OP11088 and AJUSA OPR00016.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2016 Peugeot 208 GT — AJUSA 56044100.

This table covers the lifters / tappets that transfer cam motion to the valves. Read more

One part is listed for the 2016 Peugeot 208 GT — AJUSA 85019600.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

AJUSA supplies both parts for the 2016 Peugeot 208 GT.

This group includes AJUSA 57053200 and AJUSA 12029300.

This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

One part is listed for the 2016 Peugeot 208 GT — PIERBURG 706117450.