The 2018 Peugeot 208 has 35 engine parts with verified fitment on this page — 19 part types and 5 brands, covering all 3 engine options (1.6L L4, 1.6L L4 DIESEL Turbocharged and 1.6L L4 Turbocharged). Each part includes a manufacturer part number and application notes.
The engine on the 2018 Peugeot 208 covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. The largest groups are Crankshaft Seal (3 parts), Cylinder Head Gasket Set (3 parts) and Timing Chain & Component Kit (3 parts). The other 16 part types cover the remaining 26 parts.
The 2018 Peugeot 208 was sold with 3 engines. 3 parts fit every engine; the other 32 are engine-specific. Each part shows which engine(s) it fits.
5 brands supply engine parts for the 2018 Peugeot 208, led by AJUSA (28 parts), INA (3 parts) and ELRING (2 parts), plus 2 more brands.
Each part number listed for the 2018 Peugeot 208 opens a page with every vehicle that part fits.
Camshaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 1.6L L4 | 15091600 | 🇲🇽 MX | 39 X 50 X 7Clockwise | View on Amazon |
| AJUSA Fits: 1.6L L4 | 15091700 | 🇲🇽 MX | 38 X 50 X 7Clockwise | View on Amazon |
This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
2 Camshaft Seal parts for the 2018 Peugeot 208 come from AJUSA.
Part numbers include AJUSA 15091600 and AJUSA 15091700.
Conversion / Lower Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 1.6L L4 | 54164500 | 🇲🇽 MX | Engine # EP6C(5FS) | View on Amazon |
| AJUSA Fits: 1.6L L4 | 54216100 | 🇲🇽 MX | Engine # EC5F | View on Amazon |
This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
AJUSA supplies both parts for the 2018 Peugeot 208.
Listed part numbers: AJUSA 54164500 and AJUSA 54216100.
Crankshaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 1.6L L4 | 15094100 | 🇲🇽 MX | FrontClockwise | View on Amazon |
| AJUSA Fits: 1.6L L4 | 15094500 | 🇲🇽 MX | FrontClockwise | View on Amazon |
| AJUSA Fits: 1.6L L4 | 15094200 | 🇲🇽 MX | Fits Rear85 x 105 x 8 | View on Amazon |
This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
3 Crankshaft Seal parts for the 2018 Peugeot 208 come from AJUSA.
Listed part numbers: AJUSA 15094100, AJUSA 15094500 and AJUSA 15094200.
Cylinder Head Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 1.6L L4 | 81044100 | 🇲🇽 MX | Engine # EP6C(5FS) | View on Amazon |
| AJUSA Fits: 1.6L L4 | 81044200 | 🇲🇽 MX | Engine # EC5F | View on Amazon |
This table covers the bolts that clamp the cylinder head to the block.
AJUSA supplies both parts for the 2018 Peugeot 208.
Listed part numbers: AJUSA 81044100 and AJUSA 81044200.
Cylinder Head Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 1.6L L4 | 10155800 | 🇲🇽 MX | Multi Layered Steel | View on Amazon |
| AJUSA Fits: 1.6L L4 | 10186900 | 🇲🇽 MX | Multi Layered Steel | View on Amazon |
This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
AJUSA supplies both parts for the 2018 Peugeot 208.
Listed part numbers: AJUSA 10155800 and AJUSA 10186900.
Cylinder Head Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 1.6L L4 | 52273000 | 🇲🇽 MX | Engine # EP6C(5FS) | View on Amazon |
| AJUSA Fits: 1.6L L4 | 52416300 | 🇲🇽 MX | Engine # EC5F | View on Amazon |
| ELRING Fits: all 2018 208 engines | 794930 | 🇲🇽 MX | with valve stem sealswithout cylinder head gasket | View on Amazon |
This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
3 Cylinder Head Gasket Set parts are listed for the 2018 Peugeot 208, from AJUSA and ELRING. 1 part fits every engine; the other 2 are engine-specific.
Listed part numbers: AJUSA 52273000, AJUSA 52416300 and ELRING 794930.
Engine Kit Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 1.6L L4 | 50291800 | 🇲🇽 MX | Engine # EP6C(5FS) | View on Amazon |
| AJUSA Fits: 1.6L L4 | 50379000 | 🇲🇽 MX | Engine # EC5F | View on Amazon |
This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
AJUSA supplies both parts for the 2018 Peugeot 208.
Part numbers include AJUSA 50291800 and AJUSA 50379000.
Intake Manifold Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 1.6L L4 | 24036500 | 🇲🇽 MX | Engine # EP6C(5FS) | View on Amazon |
This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
One part is listed for the 2018 Peugeot 208 — AJUSA 24036500.
Intake Plenum Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 1.6L L4 | 24023100 | 🇲🇽 MX | Engine # EC5F | View on Amazon |
This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
This group shows a single part: AJUSA 24023100.
Oil Cooler Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 1.6L L4 | 77011100 | 🇲🇽 MX | Engine # EP6C(5FS) | View on Amazon |
This table covers the gaskets that seal the Oil Cooler. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
One part is listed for the 2018 Peugeot 208 — AJUSA 77011100.
Oil Cooler Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 1.6L L4 | 01206600 | 🇲🇽 MX | View on Amazon |
This table covers the seals at the Oil Cooler. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
One part is listed for the 2018 Peugeot 208 — AJUSA 01206600.
Oil Drain Plug Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 1.6L L4 | 18001200 | 🇲🇽 MX | Engine # EP6C(5FS) | View on Amazon |
| AJUSA Fits: 1.6L L4 | 20003300 | 🇲🇽 MX | Engine # EC5F | View on Amazon |
This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
AJUSA supplies both parts for the 2018 Peugeot 208.
This group includes AJUSA 18001200 and AJUSA 20003300.
Oil Filter
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| VARIOUS MFR Fits: 1.6L L4, 1.6L L4 Turbocharged | PG5830EX | 🇲🇽 MX | Extended LifeCartridge Filter | View on Amazon |
This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.
This group shows a single part: VARIOUS MFR PG5830EX.
Timing Chain & Component Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| INA Fits: 1.6L L4 | ZC0104K | 🇲🇽 MX | Includes Chain Protect AdditiveKit Contains 1 Chain, 2 Guides, 1 Tensioner Guide, 1 Tensioner | View on Amazon |
| INA Fits: 1.6L L4 DIESEL Turbocharged | ZC0106K | 🇲🇽 MX | Includes 1 Chain, 1 TensionerIncludes Chain Protect Additive | View on Amazon |
| MARELLI Fits: all 2018 208 engines | MCK0132 | 🇲🇽 MX | View on Amazon |
This table covers kits that group a timing chain with the related tensioners and guides.
3 Timing Chain & Component Kit parts for the 2018 Peugeot 208 come from 2 brands — INA and MARELLI. 1 part fits every engine; the other 2 are engine-specific.
This group includes INA ZC0104K, INA ZC0106K and MARELLI MCK0132.
Timing Chain Tensioner
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| INA Fits: 1.6L L4 DIESEL Turbocharged | ZT0060 | 🇲🇽 MX | View on Amazon |
This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage.
This group shows a single part: INA ZT0060.
Turbocharger Mounting Hardware
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Fits: all 2018 208 engines | 584560 | 🇲🇽 MX | StudThread Size: M8X1,25x25 | View on Amazon |
This table covers the fasteners that mount the turbocharger.
One part is listed for the 2018 Peugeot 208 — ELRING 584560.
Valve Cover Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 1.6L L4 | 11117200 | 🇲🇽 MX | Engine # EC5F | View on Amazon |
This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
This group shows a single part: AJUSA 11117200.
Valve Lifter
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 1.6L L4 | 85019600 | 🇲🇽 MX | ExhaustEngine # EP6C(5FS) | View on Amazon |
| AJUSA Fits: 1.6L L4 | 85017600 | 🇲🇽 MX | IntakeEngine # EP6C(5FS) | View on Amazon |
| AJUSA Fits: 1.6L L4 | 85014300 | 🇲🇽 MX | Engine # EC5F | View on Amazon |
This table covers the lifters / tappets that transfer cam motion to the valves.
3 Valve Lifter parts for the 2018 Peugeot 208 come from AJUSA.
Part numbers include AJUSA 85019600, AJUSA 85017600 and AJUSA 85014300.
Valve Stem Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 1.6L L4 | 57023600 | 🇲🇽 MX | Engine # EC5F | View on Amazon |
| AJUSA Fits: 1.6L L4 | 57053200 | 🇲🇽 MX | Engine # EP6C(5FS) | View on Amazon |
| AJUSA Fits: 1.6L L4 | 12029300 | 🇲🇽 MX | 4.5 x 8.89 x 17.9Engine # EP6C(5FS) | View on Amazon |
This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
3 Valve Stem Seal parts for the 2018 Peugeot 208 come from AJUSA.
This group includes AJUSA 57023600, AJUSA 57053200 and AJUSA 12029300.
Buying Engine Parts for a 2018 Peugeot 208
On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.
- Match the engine first. Some engine parts fit every engine; others are engine-specific. Each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Crankshaft Seal and Cylinder Head Gasket Set .
Frequently Asked Questions
How many engine parts fit the 2018 Peugeot 208?
Our catalog currently lists 35 engine parts for the 2018 Peugeot 208 across 19 subcategories and 5 brands, covering all 3 engine options (1.6L L4, 1.6L L4 DIESEL Turbocharged and 1.6L L4 Turbocharged). Each part is matched to the engine(s) it fits.
Do engine parts differ between 2018 Peugeot 208 engines?
Some do. 3 parts fit every engine; the other 32 are engine-specific. Each row (and the filter at the top) shows which. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of engine problems on a 2018 Peugeot 208?
Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2018 Peugeot 208 was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2018 Peugeot 208?
First match the engine — each row shows which engine(s) the part fits. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2018 Peugeot 208
Engine Parts for Other Peugeot 208 Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.