2018 Peugeot 3008 Engine Parts

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2018 Peugeot 3008 — AJUSA 15061800.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Conversion / Lower Gasket Set parts for the 2018 Peugeot 3008 come from AJUSA.

This group includes AJUSA 54305700 and AJUSA 54237500.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

AJUSA supplies the 4 Crankshaft Seal parts for the 2018 Peugeot 3008.

This group includes AJUSA 15094500, AJUSA 15094200 and AJUSA 15088500 and the remaining parts above.

This table covers the bolts that clamp the cylinder head to the block. Read more

2 Cylinder Head Bolt parts for the 2018 Peugeot 3008 come from AJUSA.

This group includes AJUSA 81044100 and AJUSA 81062600.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Cylinder Head Gasket parts for the 2018 Peugeot 3008 come from AJUSA.

Part numbers include AJUSA 10187100, AJUSA 10223200 and AJUSA 10223210, among others listed above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Cylinder Head Gasket Set parts for the 2018 Peugeot 3008 come from AJUSA.

Part numbers include AJUSA 52568100 and AJUSA 53063500.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Engine Kit Gasket Set parts for the 2018 Peugeot 3008 come from AJUSA.

Listed part numbers: AJUSA 50520600 and AJUSA 51069400.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Intake Manifold Gasket parts for the 2018 Peugeot 3008 come from AJUSA.

Part numbers include AJUSA 24036700 and AJUSA 77027300.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2018 Peugeot 3008 — AJUSA 01483200.

This table covers the gaskets that seal the Oil Cooler. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Cooler Gasket parts for the 2018 Peugeot 3008 come from AJUSA.

This group includes AJUSA 77011100 and AJUSA 77014200.

This table covers the seals at the Oil Cooler. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: AJUSA 01206600.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Drain Plug Gasket parts for the 2018 Peugeot 3008 come from AJUSA.

Part numbers include AJUSA 18001200 and AJUSA 16021500.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

VARIOUS MFR supplies both parts for the 2018 Peugeot 3008.

This group includes VARIOUS MFR PG5830EX and VARIOUS MFR PG7662.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2018 Peugeot 3008 — AJUSA 14103500.

This table covers kits that group a timing chain with the related tensioners and guides. Read more

One part is listed for the 2018 Peugeot 3008 — INA ZC0104K.

This table covers the Turbocharger Boost solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

One part is listed for the 2018 Peugeot 3008 — PIERBURG 701777190.

This table covers the gaskets that seal the Turbocharger. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Turbocharger Gasket parts for the 2018 Peugeot 3008 come from AJUSA.

Part numbers include AJUSA 01207600, AJUSA JTC11858 and AJUSA JTC12034.

This table covers the Turbocharger Oil lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early. Read more

AJUSA supplies the 4 Turbocharger Oil Line parts for the 2018 Peugeot 3008.

Listed part numbers: AJUSA OP10949, AJUSA OPR00016 and AJUSA OPR00170, plus the other parts above.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

AJUSA supplies both parts for the 2018 Peugeot 3008.

Listed part numbers: AJUSA 56063000 and AJUSA 56063500.

This table covers the lifters / tappets that transfer cam motion to the valves. Read more

AJUSA supplies both parts for the 2018 Peugeot 3008.

This group includes AJUSA 85019600 and AJUSA 85017100.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

AJUSA supplies the 4 Valve Stem Seal parts for the 2018 Peugeot 3008.

Listed part numbers: AJUSA 57053200, AJUSA 12029300 and AJUSA 12029100, plus the other parts above.

This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

One part is listed for the 2018 Peugeot 3008 — PIERBURG 706117450.