This page lists 22 engine parts for the 2023 Peugeot 3008, across 17 part types, covering both the 1.6L L4 Turbocharged and the 2.0L L4 DIESEL Turbocharged. Every part shows its brand, manufacturer part number and fitment notes.
The engine on the 2023 Peugeot 3008 covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. The largest groups are Cylinder Head Gasket (3 parts), Crankshaft Seal (2 parts) and Oil Drain Plug (2 parts). The other 14 part types cover the remaining 15 parts.
The 2023 Peugeot 3008 was sold with both the 1.6L L4 Turbocharged and the 2.0L L4 DIESEL Turbocharged. Every part on this page is engine-specific. Each part shows which engine(s) it fits.
The most listed brands for 2023 Peugeot 3008 engine parts are ELRING (16 parts), PIERBURG (4 parts) and VARIOUS MFR (2 parts).
Each part number listed for the 2023 Peugeot 3008 opens a page with every vehicle that part fits.
Conversion / Lower Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Fits: 1.6L L4 Turbocharged | 376330 | 🇲🇽 MX | with Crankshaft Seal | View on Amazon |
This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
This group shows a single part: ELRING 376330.
Crankshaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Fits: 1.6L L4 Turbocharged | 004450 | 🇲🇽 MX | with Mounting Sleeve | View on Amazon |
| ELRING Fits: 1.6L L4 Turbocharged | 369470 | 🇲🇽 MX | Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) | View on Amazon |
This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
ELRING supplies both parts for the 2023 Peugeot 3008.
Listed part numbers: ELRING 004450 and ELRING 369470.
Cylinder Head Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Fits: 1.6L L4 Turbocharged | 426830 | 🇲🇽 MX | SetNumber of Bolts/Screws: 13 | View on Amazon |
This table covers the bolts that clamp the cylinder head to the block.
This group shows a single part: ELRING 426830.
Cylinder Head Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Fits: 1.6L L4 Turbocharged | 295751 | 🇲🇽 MX | Diameter [MM]: 78,3Installed Thickness [MM]: 1,24 | View on Amazon |
| ELRING Fits: 1.6L L4 Turbocharged | 729040 | 🇲🇽 MX | Diameter [MM]: 78.3Installed Thickness [MM]: 0.94 | View on Amazon |
| ELRING Fits: 1.6L L4 Turbocharged | 729041 | 🇲🇽 MX | Diameter [MM]: 78,3Installed Thickness [MM]: 0,94 | View on Amazon |
This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
3 Cylinder Head Gasket parts for the 2023 Peugeot 3008 come from ELRING.
Listed part numbers: ELRING 295751, ELRING 729040 and ELRING 729041.
Intake Manifold Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Fits: 1.6L L4 Turbocharged | 893600 | 🇲🇽 MX | Material: Fluoroelastomer (FPM) | View on Amazon |
This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
This group shows a single part: ELRING 893600.
Oil Drain Plug
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Fits: 1.6L L4 Turbocharged | 523450 | 🇲🇽 MX | without Seal RingBolt Head/Nut Design: Hexagon Socket | View on Amazon |
| ELRING Fits: 1.6L L4 Turbocharged | 523470 | 🇲🇽 MX | with Seal RingBolt Head/Nut Design: Hexagon Socket | View on Amazon |
This table covers the drain plugs in the oil pan.
ELRING supplies both parts for the 2023 Peugeot 3008.
This group includes ELRING 523450 and ELRING 523470.
Oil Drain Plug Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Fits: 1.6L L4 Turbocharged | 813052 | 🇲🇽 MX | Material: CopperShape: C-Shape | View on Amazon |
This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
This group shows a single part: ELRING 813052.
Oil Filter
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| VARIOUS MFR Fits: 1.6L L4 Turbocharged | PG5830EX | 🇲🇽 MX | Extended LifeCartridge Filter | View on Amazon |
| VARIOUS MFR Fits: 2.0L L4 DIESEL Turbocharged | PG7662 | 🇲🇽 MX | Spin-On | View on Amazon |
This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.
VARIOUS MFR supplies both parts for the 2023 Peugeot 3008.
Listed part numbers: VARIOUS MFR PG5830EX and VARIOUS MFR PG7662.
Oil Filter Housing Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Fits: 1.6L L4 Turbocharged | 473830 | 🇲🇽 MX | View on Amazon |
This table covers the seals at the Oil Filter Housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
One part is listed for the 2023 Peugeot 3008 — ELRING 473830.
Oil Pump
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| PIERBURG Fits: 1.6L L4 Turbocharged | 707919330 | 🇲🇽 MX | Gear Pumpwith Electrical Oil Pressure Valve | View on Amazon |
This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit.
One part is listed for the 2023 Peugeot 3008 — PIERBURG 707919330.
Turbocharger Boost Solenoid
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| PIERBURG Fits: 1.6L L4 Turbocharged | 701777190 | 🇲🇽 MX | Electric-PneumaticValve Type: Solenoid Valve | View on Amazon |
This table covers the Turbocharger Boost solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid.
One part is listed for the 2023 Peugeot 3008 — PIERBURG 701777190.
Turbocharger Diverter / Bypass Valve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| PIERBURG Fits: 1.6L L4 Turbocharged | 701115080 | 🇲🇽 MX | ElectricValve Type: Overrun Air Valve | View on Amazon |
This table covers the Turbocharger Diverter / Bypass valves. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.
One part is listed for the 2023 Peugeot 3008 — PIERBURG 701115080.
Turbocharger Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Fits: 1.6L L4 Turbocharged | 737720 | 🇲🇽 MX | Charge Type: Exhaust Turbocharger | View on Amazon |
This table covers the gaskets that seal the Turbocharger. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
This group shows a single part: ELRING 737720.
Turbocharger Mounting Hardware
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Fits: 1.6L L4 Turbocharged | 376340 | 🇲🇽 MX | with gaskets/sealswith Mounting Manual,with Bolts/Screws | View on Amazon |
This table covers the fasteners that mount the turbocharger.
This group shows a single part: ELRING 376340.
Turbocharger Oil Line Gasket / O-Ring
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Fits: 1.6L L4 Turbocharged | 788770 | 🇲🇽 MX | material: EPDM (ethylene propylene diene Monomer (M-class) rubber) | View on Amazon |
This table covers the Turbocharger Oil Line Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove.
One part is listed for the 2023 Peugeot 3008 — ELRING 788770.
Valve Stem Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Fits: 1.6L L4 Turbocharged | 747210 | 🇲🇽 MX | SetMaterial: FPM (fluoride rubber) | View on Amazon |
This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
One part is listed for the 2023 Peugeot 3008 — ELRING 747210.
Variable Valve Timing (VVT) Solenoid / Actuator
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| PIERBURG Fits: 1.6L L4 Turbocharged | 706117450 | 🇲🇽 MX | Electric | View on Amazon |
This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same.
One part is listed for the 2023 Peugeot 3008 — PIERBURG 706117450.
Buying Engine Parts for a 2023 Peugeot 3008
On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.
- Match the engine first. Every engine part here is engine-specific; each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Cylinder Head Gasket and Crankshaft Seal .
Frequently Asked Questions
How many engine parts fit the 2023 Peugeot 3008?
Our catalog currently lists 22 engine parts for the 2023 Peugeot 3008 across 17 subcategories and 3 brands, covering both the 1.6L L4 Turbocharged and the 2.0L L4 DIESEL Turbocharged. Each part is matched to the engine(s) it fits.
Do engine parts differ between 2023 Peugeot 3008 engines?
Yes. Every engine part on this page is engine-specific. Each row shows which engine(s) it fits — use the filter at the top to hide the rest. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of engine problems on a 2023 Peugeot 3008?
Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2023 Peugeot 3008 was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2023 Peugeot 3008?
First match the engine — each row shows which engine(s) the part fits. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2023 Peugeot 3008
Engine Parts for Other Peugeot 3008 Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.