2011 Ram 1500 Electrical Connector Parts

This table covers the harness connectors at the A/C Compressor Clutch Coil. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: WELLS 1P1711.

This table covers the harness connectors at the A/C Refrigerant Pressure Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2011 Ram 1500 — FOUR SEASONS 20954.

This table covers the harness connectors at the A/C Refrigerant Temperature Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S2478.

This table covers the harness connectors at each ABS wheel-speed sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

9 ABS Wheel Speed Sensor Connector parts for the 2011 Ram 1500 come from 6 brands — STANDARD MOTOR PRODUCTS, WELLS, ACDELCO and 3 other brands. The "Popular" part is STANDARD MOTOR PRODUCTS HP3945. Every part fits all 3 engine options (3.7L V6, 4.7L V8 and 5.7L V8).

Listed part numbers: STANDARD MOTOR PRODUCTS HP3945, STANDARD MOTOR PRODUCTS S824 and ACDELCO PT2160, plus the other parts above.

This table covers the harness connectors at the Accelerator Pedal Position Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Accelerator Pedal Position Sensor Connector parts for the 2011 Ram 1500 come from 3 brands — ROSTRA, STANDARD MOTOR PRODUCTS and WELLS. Every part fits all 3 engine options (3.7L V6, 4.7L V8 and 5.7L V8).

Listed part numbers: ROSTRA 610494, STANDARD MOTOR PRODUCTS S1478 and WELLS 1P2224.

This table covers the harness connectors at the Air Bag Clockspring. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2011 Ram 1500 — STANDARD MOTOR PRODUCTS S2468.

This table covers the harness connectors at the Air Intake / Charge Temperature Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

6 Air Intake / Charge Temperature Sensor Connector parts are listed for the 2011 Ram 1500, from WELLS, STANDARD MOTOR PRODUCTS, UNITED MOTOR PRODUCTS and 1 other brand. WELLS 1P1694 carries the "Popular" badge.

Part numbers include WELLS 1P1694, STANDARD MOTOR PRODUCTS HP4665 and STANDARD MOTOR PRODUCTS S2034, among others listed above.

This table covers the harness connectors at the Alternator / Generator. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Alternator / Generator Connector parts for the 2011 Ram 1500 come from STANDARD MOTOR PRODUCTS. Every part fits all 3 engine options (3.7L V6, 4.7L V8 and 5.7L V8).

This group includes STANDARD MOTOR PRODUCTS HP4347 and STANDARD MOTOR PRODUCTS S1895.

This table covers the harness connectors at the Back Up / Reverse Lamp. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

5 Back Up / Reverse Lamp Connector parts are listed for the 2011 Ram 1500, from STANDARD MOTOR PRODUCTS, WELLS, HOLSTEIN and 1 other brand. WELLS 1P2047 carries the "Popular" badge. All of them fit every engine offered in the 2011 1500.

This group includes WELLS 1P2047, HOLSTEIN 2HAR0035 and STANDARD MOTOR PRODUCTS HP4347 and the remaining parts above.

This table covers the connectors at the blower resistor or control module. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

10 Blower Motor Control Module / Resistor Connector parts are listed for the 2011 Ram 1500, from HOLSTEIN, GPD, STANDARD MOTOR PRODUCTS and 3 other brands. GPD 1712769 carries the "Popular" badge. All of them fit every engine offered in the 2011 1500.

This table covers the harness connectors at the Brake Light Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Brake Light Switch Connector parts are listed for the 2011 Ram 1500, from STANDARD MOTOR PRODUCTS and WELLS. 1 part fits every engine; the other 1 is engine-specific.

Listed part numbers: STANDARD MOTOR PRODUCTS S3095 and WELLS 1P2378.

This table covers the harness connectors at the Camshaft Position Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

6 Camshaft Position Sensor Connector parts for the 2011 Ram 1500 come from 6 brands — STANDARD MOTOR PRODUCTS, WALKER PRODUCTS, HOLSTEIN and 3 other brands. The "Popular" part is STANDARD MOTOR PRODUCTS S2316. Every part fits all 3 engine options (3.7L V6, 4.7L V8 and 5.7L V8).

This group includes STANDARD MOTOR PRODUCTS S2316, WALKER PRODUCTS 2701145 and HOLSTEIN 2HAR0060 and the remaining parts above.

This table covers the harness connectors at the Crankshaft Position Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

12 Crankshaft Position Sensor Connector parts for the 2011 Ram 1500 come from 6 brands — ROSTRA, STANDARD MOTOR PRODUCTS, WELLS and 3 other brands.

This table covers the harness connectors at the Cylinder Deactivation Solenoid. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Cylinder Deactivation Solenoid Connector parts for the 2011 Ram 1500 come from 2 brands — STANDARD MOTOR PRODUCTS and WELLS.

Listed part numbers: STANDARD MOTOR PRODUCTS S2442 and WELLS 1P2227.

This table covers the harness connectors at the Door Lock Actuator. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Door Lock Actuator Connector parts for the 2011 Ram 1500 come from 3 brands — ROSTRA, STANDARD MOTOR PRODUCTS and WELLS. Every part fits all 3 engine options (3.7L V6, 4.7L V8 and 5.7L V8).

This group includes ROSTRA 610388, STANDARD MOTOR PRODUCTS S2894 and WELLS 1P2668.

This table covers the wiring-harness connectors at the Door. Typical signs include an intermittent fault that moves when you wiggle the harness, or a melted or corroded plug. Match terminal count and keyway. Repair with heat-shrink terminals, not twist-and-tape. Read more

MOPAR supplies the 5 Door Wiring Harness / Connector parts for the 2011 Ram 1500. All of them fit every engine offered in the 2011 1500.

Part numbers include MOPAR 68053525AB, MOPAR 68053526AB and MOPAR 68053527AB, among others listed above.

This table covers the harness connectors at the EGR Valve. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 EGR Valve Connector parts for the 2011 Ram 1500 come from 3 brands — STANDARD MOTOR PRODUCTS, UNITED MOTOR PRODUCTS and WELLS.

Part numbers include STANDARD MOTOR PRODUCTS S1922, UNITED MOTOR PRODUCTS CON50 and WELLS 1P1645.

This table covers the harness connectors at the Engine Block Heater. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Engine Block Heater Connector parts for the 2011 Ram 1500 come from MOPAR.

This group includes MOPAR 5148036AA and MOPAR 4801781AA.

This table covers the wiring-harness connectors at the Engine. Typical signs include an intermittent fault that moves when you wiggle the harness, or a melted or corroded plug. Match terminal count and keyway. Repair with heat-shrink terminals, not twist-and-tape. Read more

7 Engine Wiring Harness / Connector parts are listed for the 2011 Ram 1500, from MOPAR and DORMAN.

Listed part numbers: DORMAN 926830, MOPAR 68088870AB and MOPAR 68088874AB, plus the other parts above.

This table covers the harness connectors at the Fog / Driving Lamp. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

6 Fog / Driving Lamp Connector parts for the 2011 Ram 1500 come from 5 brands — STANDARD MOTOR PRODUCTS, ACDELCO, ROSTRA and 2 other brands. The "Popular" part is STANDARD MOTOR PRODUCTS HP3970. Every part fits all 3 engine options (3.7L V6, 4.7L V8 and 5.7L V8).

This group includes STANDARD MOTOR PRODUCTS HP3970, STANDARD MOTOR PRODUCTS S524 and ACDELCO LS255 and the remaining parts above.

This table covers the harness connectors at the Fuel Injector. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

6 Fuel Injector Connector parts for the 2011 Ram 1500 come from 5 brands — STANDARD MOTOR PRODUCTS, WELLS, GB REMANUFACTURING and 2 other brands. The "Popular" part is STANDARD MOTOR PRODUCTS HP4347. Every part fits all 3 engine options (3.7L V6, 4.7L V8 and 5.7L V8).

Part numbers include STANDARD MOTOR PRODUCTS HP4347, WELLS 1P1344 and GB REMANUFACTURING 5191, among others listed above.

This table covers the harness connectors at the Fuel Sending Unit. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S1410.

This table covers the harness connectors at the Headlamp Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: WELLS 1P1612.

This table covers the wiring-harness connectors at the Headlamp. Typical signs include an intermittent fault that moves when you wiggle the harness, or a melted or corroded plug. Match terminal count and keyway. Repair with heat-shrink terminals, not twist-and-tape. Read more

7 Headlamp Wiring Harness / Connector parts are listed for the 2011 Ram 1500, from STANDARD MOTOR PRODUCTS, DORMAN and SKP. STANDARD MOTOR PRODUCTS LWH104 carries the "Popular" badge. 6 parts fit every engine; the other 1 is engine-specific.

This group includes STANDARD MOTOR PRODUCTS LWH104, STANDARD MOTOR PRODUCTS LWH106 and DORMAN 926384 and the remaining parts above.

This table covers the harness connectors at the Heater Core Temperature Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S2478.

This table covers the harness connectors at the Hood Ajar Indicator Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2011 Ram 1500 — WELLS 1P3330.

This table covers the harness connectors at the Ignition Coil. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

4 Ignition Coil Connector parts for the 2011 Ram 1500 come from 4 brands — ROSTRA, STANDARD MOTOR PRODUCTS, UNITED MOTOR PRODUCTS and 1 other brand. Every part fits all 3 engine options (3.7L V6, 4.7L V8 and 5.7L V8).

Listed part numbers: ROSTRA 610156, STANDARD MOTOR PRODUCTS S2087 and UNITED MOTOR PRODUCTS CON60, plus the other parts above.

This table covers the harness connectors at the Instrument Panel Dimmer Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2011 Ram 1500 — WELLS 1P1612.

This table covers the harness connectors at the Intake Manifold Runner Control Valve / Solenoid. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2011 Ram 1500 — STANDARD MOTOR PRODUCTS S3045.

This table covers the harness connectors at the Knock / Detonation Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Knock / Detonation Sensor Connector parts for the 2011 Ram 1500 come from 2 brands — WALKER PRODUCTS and WELLS. Every part fits all 3 engine options (3.7L V6, 4.7L V8 and 5.7L V8).

Part numbers include WALKER PRODUCTS 2701034 and WELLS 1P1347.

This table covers the harness connectors at the Manifold Pressure (MAP) Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

5 Manifold Pressure (MAP) Sensor Connector parts for the 2011 Ram 1500 come from 5 brands — STANDARD MOTOR PRODUCTS, ROSTRA, ULTRA-POWER and 2 other brands. The "Popular" part is STANDARD MOTOR PRODUCTS S2816. 2 parts fit every engine; the other 3 are engine-specific.

Part numbers include STANDARD MOTOR PRODUCTS S2816, ROSTRA 610107 and ULTRA-POWER 2701095, among others listed above.

This table covers the harness connectors at the Oil Pressure Sender / Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

11 Oil Pressure Sender / Switch Connector parts are listed for the 2011 Ram 1500, from STANDARD MOTOR PRODUCTS, WELLS, ROSTRA and 3 other brands. STANDARD MOTOR PRODUCTS HP3925 carries the "Popular" badge. 4 parts fit every engine; the other 7 are engine-specific.

This table covers the harness connectors at the Oil Temperature Sender. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2011 Ram 1500 — WELLS 1P2227.

This table covers the harness connectors at the Oxygen (O2) Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Oxygen (O2) Sensor Connector parts for the 2011 Ram 1500 come from 2 brands — STANDARD MOTOR PRODUCTS and WELLS. 1 part fits every engine; the other 1 is engine-specific.

Part numbers include STANDARD MOTOR PRODUCTS S1932 and WELLS 1P3359.

This table covers the harness connectors at the Parking / Turn Signal Lamp. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

4 Parking / Turn Signal Lamp Connector parts for the 2011 Ram 1500 come from 3 brands — STANDARD MOTOR PRODUCTS, DORMAN and WELLS. Every part fits all 3 engine options (3.7L V6, 4.7L V8 and 5.7L V8).

This group includes DORMAN 645943, STANDARD MOTOR PRODUCTS S2983 and STANDARD MOTOR PRODUCTS S3076 and the remaining parts above.

This table covers the harness connectors at the Parking Aid Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Parking Aid Sensor Connector parts for the 2011 Ram 1500 come from 2 brands — STANDARD MOTOR PRODUCTS and WELLS. Every part fits all 3 engine options (3.7L V6, 4.7L V8 and 5.7L V8).

This group includes STANDARD MOTOR PRODUCTS S1497 and WELLS 1P3362.

This table covers the harness connectors at the Parking Brake Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Parking Brake Switch Connector parts are listed for the 2011 Ram 1500, from FAMOUS BRAND and WELLS. All of them fit every engine offered in the 2011 1500.

Part numbers include FAMOUS BRAND PTA3009 and WELLS 1P2226.

This table covers the harness connectors at the Parking Lamp Relay. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

STANDARD MOTOR PRODUCTS supplies both parts for the 2011 Ram 1500. All of them fit every engine offered in the 2011 1500.

Part numbers include STANDARD MOTOR PRODUCTS HP3810 and STANDARD MOTOR PRODUCTS S654.

This table covers the harness connectors at the Power Window Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2011 Ram 1500 — STANDARD MOTOR PRODUCTS S2093.

This table covers the harness connectors at the Radiator Fan Motor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Radiator Fan Motor Connector parts for the 2011 Ram 1500 come from STANDARD MOTOR PRODUCTS.

Part numbers include STANDARD MOTOR PRODUCTS S2267 and STANDARD MOTOR PRODUCTS S3023.

This table covers the harness connectors at the Radio. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

METRA supplies both parts for the 2011 Ram 1500. All of them fit every engine offered in the 2011 1500.

Part numbers include METRA AXRSEHCH1 and METRA AXADBXHCH2.

This table covers the Repair harnesses. Read more

2 Repair Harness parts for the 2011 Ram 1500 come from ROSTRA. Every part fits all 3 engine options (3.7L V6, 4.7L V8 and 5.7L V8).

Part numbers include ROSTRA 3500172 and ROSTRA 3500170.

This table covers the harness connectors at the Seat Heater. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Seat Heater Connector parts for the 2011 Ram 1500 come from 2 brands — ROSTRA and WELLS. Every part fits all 3 engine options (3.7L V6, 4.7L V8 and 5.7L V8).

This group includes ROSTRA 610977 and WELLS 1P2228.

This table covers the harness connectors at the Shift Solenoid. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2011 Ram 1500 — STANDARD MOTOR PRODUCTS S1911.

This table covers the harness connectors at the Side Marker Lamp. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

4 Side Marker Lamp Connector parts are listed for the 2011 Ram 1500, from STANDARD MOTOR PRODUCTS, HOLSTEIN and UNITED MOTOR PRODUCTS. All of them fit every engine offered in the 2011 1500.

Part numbers include HOLSTEIN 2HAR0035, STANDARD MOTOR PRODUCTS HP4347 and STANDARD MOTOR PRODUCTS S1895, among others listed above.

This table covers the harness connectors at the Speed Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

10 Speed Sensor Connector parts are listed for the 2011 Ram 1500, from STANDARD MOTOR PRODUCTS, WELLS, WALKER PRODUCTS and 3 other brands. STANDARD MOTOR PRODUCTS TX3A carries the "Popular" badge. 3 parts fit every engine; the other 7 are engine-specific.

This table covers the harness connectors at the Starter Solenoid. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S3075.

This table covers the harness connectors at the Steering Wheel. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: MOPAR 68056180AB.

This table covers the harness connectors at the Steering Wheel Position Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2011 Ram 1500 — STANDARD MOTOR PRODUCTS S2468.

This table covers the wiring-harness connectors at the Tailgate. Typical signs include an intermittent fault that moves when you wiggle the harness, or a melted or corroded plug. Match terminal count and keyway. Repair with heat-shrink terminals, not twist-and-tape. Read more

This group shows a single part: MOPAR 68050963AA.

This table covers the harness connectors at the Temperature Sender / Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Temperature Sender / Sensor Connector parts for the 2011 Ram 1500 come from 2 brands — STANDARD MOTOR PRODUCTS and WELLS. Every part fits all 3 engine options (3.7L V6, 4.7L V8 and 5.7L V8).

This group includes STANDARD MOTOR PRODUCTS S2442 and WELLS 1P2227.

This table covers the harness connectors at the Throttle Control Actuator. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Throttle Control Actuator Connector parts for the 2011 Ram 1500 come from STANDARD MOTOR PRODUCTS.

Listed part numbers: STANDARD MOTOR PRODUCTS S1057 and STANDARD MOTOR PRODUCTS S2839.

This table covers the harness connectors at the Throttle Position Sensor (TPS). Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Throttle Position Sensor (TPS) Connector parts are listed for the 2011 Ram 1500, from DORMAN and WELLS. 1 part fits every engine; the other 1 is engine-specific.

This group includes DORMAN 645233 and WELLS 1P2225.

This table covers the harness connectors at the Trailer Adapter. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Trailer Adapter Connector parts for the 2011 Ram 1500 come from 2 brands — CURT and MOPAR. Every part fits all 3 engine options (3.7L V6, 4.7L V8 and 5.7L V8).

Listed part numbers: CURT 57101 and MOPAR 56019823.

This table covers the harness connectors at the Trailer Brake Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Trailer Brake Switch Connector parts for the 2011 Ram 1500 come from 2 brands — CURT and TEKONSHA. Every part fits all 3 engine options (3.7L V6, 4.7L V8 and 5.7L V8).

Listed part numbers: CURT 51438, CURT 51439 and TEKONSHA 3021.

This table covers the trailer-lighting connectors at the hitch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

20 Trailer Connector parts are listed for the 2011 Ram 1500, from CURT, STANDARD MOTOR PRODUCTS, MOPAR and 4 other brands. CURT 56415 carries the "Popular" badge. All of them fit every engine offered in the 2011 1500.

This table covers the harness connectors at the Trailer Extension. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Trailer Extension Connector parts for the 2011 Ram 1500 come from CURT. Every part fits all 3 engine options (3.7L V6, 4.7L V8 and 5.7L V8).

Listed part numbers: CURT 56475, CURT 56070010 and CURT 56000010.

This table covers the harness connectors at the Transmission Shift Lever. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: MOPAR 68024883AC.

This table covers the harness connectors at the Turn Signal Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2011 Ram 1500 — WELLS 1P3473.