2011 Ram 1500 Engine Parts

This table covers the Balance shafts. Read more

2 Balance Shaft parts for the 2011 Ram 1500 come from MOPAR.

This group includes MOPAR 53020818 and MOPAR 53021298AB.

This table covers the Balance Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

2 Balance Shaft Bearing parts for the 2011 Ram 1500 come from 2 brands — ENGINETECH and SEALED POWER.

Listed part numbers: ENGINETECH CC485 and SEALED POWER 1895M.

This table covers the Balance Shaft sprockets. Read more

PREFERRED COMPONENTS INC supplies both parts for the 2011 Ram 1500.

Listed part numbers: PREFERRED COMPONENTS INC G57017 and PREFERRED COMPONENTS INC G57018.

This table covers the camshafts that open the valves. Read more

15 Camshaft parts are listed for the 2011 Ram 1500, from MELLING, SKP and ENGINETECH. ENGINETECH ES1411 carries the "Popular" badge.

In the High Performance grade, MELLING supplies 4 parts: engineered beyond original-equipment specification. A representative part number is MELLING 23107.

The Standard Replacement section lists 5 options from SKP, MELLING and ENGINETECH — built to original-equipment specification. ENGINETECH ES1411 is listed in this group.

6 ungrouped parts are not assigned to a grade, with the same engine-level match.

This table covers the Camshaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

7 Camshaft Bearing parts are listed for the 2011 Ram 1500, from ENGINETECH, DURA-BOND, SEALED POWER and 2 other brands. ENGINETECH CC487 carries the "Popular" badge.

Part numbers include ENGINETECH CC487, SEALED POWER 1935M and DURA-BOND PD41, among others listed above.

This table covers the Camshaft hardware kits. Read more

ENGINETECH supplies the 3 Camshaft Hardware Kit parts for the 2011 Ram 1500.

Part numbers include ENGINETECH HK121, ENGINETECH HK120 and ENGINETECH HK1204.

This table covers the Camshaft plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

2 Camshaft Plug parts are listed for the 2011 Ram 1500, from MELLING and MOPAR.

Part numbers include MELLING MEP334 and MOPAR 6507663AA.

This table covers the Camshaft Retainer / Thrust plates. Typical signs include warpage, cracks, or a plate that no longer locates the assembly. Confirm which plate the notes describe — backing plates, clutch plates and strike plates are different parts. Read more

2 Camshaft Retainer / Thrust Plate parts for the 2011 Ram 1500 come from 2 brands — MELLING and MOPAR.

Part numbers include MELLING MD200 and MOPAR 53022178AE.

This table covers the Circular / Semi-Circular plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

This group shows a single part: ELRING B16450.

This table covers the connecting rods between each piston and the crankshaft. Read more

ENGINETECH supplies the 3 Connecting Rod parts for the 2011 Ram 1500.

This group includes ENGINETECH ECR111, ENGINETECH ECR112 and ENGINETECH ECR112N.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

23 Connecting Rod Bearing parts are listed for the 2011 Ram 1500, from MAHLE / CLEVITE, KING ENGINE BEARINGS, ENGINETECH and 1 other brand. ENGINETECH BB111J carries the "Popular" badge.

High Performance: 4 parts, from KING ENGINE BEARINGS and MAHLE / CLEVITE. A representative part number is KING ENGINE BEARINGS CR8032XPN.

The Standard Replacement section: 11 options from MAHLE / CLEVITE, ENGINETECH, KING ENGINE BEARINGS and 1 other brand. ENGINETECH BB111J is listed in this group.

8 ungrouped parts are not assigned to a grade, with the same engine-level match.

This table covers the Connecting Rod bolts. Read more

This group shows a single part: MOPAR 6503928.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

18 Conversion / Lower Gasket Set parts are listed for the 2011 Ram 1500, from ENGINETECH, FEL-PRO, AJUSA and 7 other brands. ENGINETECH CR226CSB carries the "Popular" badge.

This table covers the crankshafts that turn piston motion into rotation. Read more

4 Crankshaft parts are listed for the 2011 Ram 1500, from ENGINETECH and MOPAR.

Part numbers include ENGINETECH 253600, ENGINETECH 139650 and MOPAR 53020959AB, among others listed above.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

14 Crankshaft Main Bearing parts for the 2011 Ram 1500 come from 5 brands — MOPAR, MAHLE / CLEVITE, ENGINETECH and 2 other brands. The "Popular" part is ENGINETECH BC115J.

The High Performance section: 2 options from MAHLE / CLEVITE. MAHLE / CLEVITE MS2220H is listed in this group.

Standard Replacement: 4 parts, from MAHLE / CLEVITE, ENGINETECH and SEALED POWER. A representative part number is ENGINETECH BC115J.

8 further parts sit outside the graded sections, with the same engine-level match.

This table covers the Crankshaft Main Bearing Cap bolts. Read more

One part is listed for the 2011 Ram 1500 — ARP 2445400.

This table covers the wear sleeves used to restore a Crankshaft Main Bearing seal surface. Read more

One part is listed for the 2011 Ram 1500 — VICTOR REINZ 711347800.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

7 Crankshaft Repair Sleeve parts for the 2011 Ram 1500 come from 5 brands — SCHAEFFLER, WJB / INMOTION PARTS, FEL-PRO and 2 other brands. The "Popular" part is SCHAEFFLER SR3501.

Listed part numbers: SCHAEFFLER SR3501, WJB / INMOTION PARTS WS99181 and FEL-PRO 16230, plus the other parts above.

This table covers the Crankshaft Repair Sleeve tools. This is a service tool, not a wear part — match the application in the notes. Read more

2 Crankshaft Repair Sleeve Tool parts for the 2011 Ram 1500 come from 2 brands — FEL-PRO and VICTOR REINZ.

Part numbers include FEL-PRO 16328 and VICTOR REINZ 711620300.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

36 Crankshaft Seal parts for the 2011 Ram 1500 come from 14 brands — ELRING, APEX, NATIONAL and 11 other brands. The "Popular" part is APEX ABS265. A list this long means Crankshaft Seal applications vary by configuration — the notes carry the qualifiers.

This table covers the gaskets that seal the Crankshaft Seal. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2011 Ram 1500 — ELRING 907600.

This table covers the kits that disable cylinder deactivation. Read more

This group shows a single part: MELLING MDK100.

This table covers the Cylinder Deactivation solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

5 Cylinder Deactivation Solenoid parts for the 2011 Ram 1500 come from 4 brands — DORMAN, CLOYES, STANDARD MOTOR PRODUCTS and 1 other brand. The "Popular" part is DORMAN 916592XD.

This group includes DORMAN 916592XD, CLOYES VTS237 and DORMAN 916593 and the remaining parts above.

This table covers the cylinder heads that close the top of the block. Read more

12 Cylinder Head parts for the 2011 Ram 1500 come from 3 brands — ENGINETECH, MOPAR and CYLINDER HEAD EXPRESS. The "Popular" part is CYLINDER HEAD EXPRESS CI212BL.

This table covers the bolts that clamp the cylinder head to the block. Read more

16 Cylinder Head Bolt parts are listed for the 2011 Ram 1500, from MAHLE / CLEVITE, VICTOR REINZ, ENGINETECH and 5 other brands. ENGINETECH HB202 carries the "Popular" badge.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

29 Cylinder Head Gasket parts are listed for the 2011 Ram 1500, from MAHLE / CLEVITE, ENGINETECH, ELRING and 6 other brands. ENGINETECH HCR226A carries the "Popular" badge. The notes list position, dimensions and spec qualifiers wherever the manufacturer distinguishes between variants.