2011 Ram 3500 Electrical Connector Parts

This table covers the harness connectors at the A/C Compressor Clutch Coil. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 A/C Compressor Clutch Coil Connector parts for the 2011 Ram 3500 come from 2 brands — ROSTRA and WELLS. Every part fits both the 5.7L V8 and the 6.7L L6 DIESEL Turbocharged.

Part numbers include ROSTRA 610040 and WELLS 1P1711.

This table covers the harness connectors at the A/C Compressor Relay. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 A/C Compressor Relay Connector parts are listed for the 2011 Ram 3500, from STANDARD MOTOR PRODUCTS and UNITED MOTOR PRODUCTS. All of them fit every engine offered in the 2011 3500.

Listed part numbers: STANDARD MOTOR PRODUCTS S869 and UNITED MOTOR PRODUCTS CON182.

This table covers the harness connectors at the A/C Refrigerant Pressure Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2011 Ram 3500 — FOUR SEASONS 20954.

This table covers the harness connectors at the A/C Refrigerant Temperature Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S2478.

This table covers the harness connectors at each ABS wheel-speed sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

8 ABS Wheel Speed Sensor Connector parts for the 2011 Ram 3500 come from 6 brands — STANDARD MOTOR PRODUCTS, ACDELCO, DORMAN and 3 other brands. The "Popular" part is STANDARD MOTOR PRODUCTS HP3945. Every part fits both the 5.7L V8 and the 6.7L L6 DIESEL Turbocharged.

Listed part numbers: STANDARD MOTOR PRODUCTS HP3945, STANDARD MOTOR PRODUCTS S824 and ACDELCO PT2160, plus the other parts above.

This table covers the harness connectors at the Accelerator Pedal Position Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Accelerator Pedal Position Sensor Connector parts for the 2011 Ram 3500 come from 3 brands — ROSTRA, STANDARD MOTOR PRODUCTS and WELLS. Every part fits both the 5.7L V8 and the 6.7L L6 DIESEL Turbocharged.

This group includes ROSTRA 610494, STANDARD MOTOR PRODUCTS S1478 and WELLS 1P2224.

This table covers the harness connectors at the Accessory Power Relay. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Accessory Power Relay Connector parts for the 2011 Ram 3500 come from 3 brands — STANDARD MOTOR PRODUCTS, UNITED MOTOR PRODUCTS and WELLS. Every part fits both the 5.7L V8 and the 6.7L L6 DIESEL Turbocharged.

This group includes STANDARD MOTOR PRODUCTS S869, UNITED MOTOR PRODUCTS CON182 and WELLS 1P1472.

This table covers the harness connectors at the Air Bag Clockspring. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2011 Ram 3500 — STANDARD MOTOR PRODUCTS S2468.

This table covers the harness connectors at the Air Injection Relay. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Air Injection Relay Connector parts for the 2011 Ram 3500 come from 2 brands — STANDARD MOTOR PRODUCTS and UNITED MOTOR PRODUCTS. Every part fits both the 5.7L V8 and the 6.7L L6 DIESEL Turbocharged.

Listed part numbers: STANDARD MOTOR PRODUCTS S869 and UNITED MOTOR PRODUCTS CON182.

This table covers the harness connectors at the Air Intake / Charge Temperature Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

4 Air Intake / Charge Temperature Sensor Connector parts are listed for the 2011 Ram 3500, from STANDARD MOTOR PRODUCTS, UNITED MOTOR PRODUCTS and WELLS. 3 parts fit every engine; the other 1 is engine-specific.

Listed part numbers: STANDARD MOTOR PRODUCTS HP4665, STANDARD MOTOR PRODUCTS S2034 and UNITED MOTOR PRODUCTS CON57, plus the other parts above.

This table covers the harness connectors at the Back Up / Reverse Lamp. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

5 Back Up / Reverse Lamp Connector parts are listed for the 2011 Ram 3500, from STANDARD MOTOR PRODUCTS, WELLS, HOLSTEIN and 1 other brand. WELLS 1P2047 carries the "Popular" badge. All of them fit every engine offered in the 2011 3500.

Part numbers include WELLS 1P2047, HOLSTEIN 2HAR0035 and STANDARD MOTOR PRODUCTS HP4347, among others listed above.

This table covers the harness connectors at the Back Up / Reverse Lamp Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2011 Ram 3500 — WELLS 1P3332.

This table covers the harness connectors at the Barometric Pressure Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2011 Ram 3500 — STANDARD MOTOR PRODUCTS S2883.

This table covers the harness connectors at the Blower Motor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S3208.

This table covers the connectors at the blower resistor or control module. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

10 Blower Motor Control Module / Resistor Connector parts are listed for the 2011 Ram 3500, from HOLSTEIN, GPD, STANDARD MOTOR PRODUCTS and 3 other brands. GPD 1712769 carries the "Popular" badge. All of them fit every engine offered in the 2011 3500.

This table covers the harness connectors at the Brake Light Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Brake Light Switch Connector parts are listed for the 2011 Ram 3500, from STANDARD MOTOR PRODUCTS and WELLS. All of them fit every engine offered in the 2011 3500.

Part numbers include STANDARD MOTOR PRODUCTS S3095 and WELLS 1P2378.

This table covers the harness connectors at the Camshaft Position Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

8 Camshaft Position Sensor Connector parts for the 2011 Ram 3500 come from 6 brands — STANDARD MOTOR PRODUCTS, WELLS, WALKER PRODUCTS and 3 other brands. The "Popular" part is STANDARD MOTOR PRODUCTS S2316.

Part numbers include STANDARD MOTOR PRODUCTS S2316, WALKER PRODUCTS 2701145 and HOLSTEIN 2HAR0060, among others listed above.

This table covers the harness connectors at the Crankshaft Position Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

6 Crankshaft Position Sensor Connector parts for the 2011 Ram 3500 come from 4 brands — STANDARD MOTOR PRODUCTS, WELLS, HOLSTEIN and 1 other brand.

Listed part numbers: HOLSTEIN 2HAR0060, ROSTRA 610139 and STANDARD MOTOR PRODUCTS S2316, plus the other parts above.

This table covers the harness connectors at the Cylinder Deactivation Solenoid. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: WELLS 1P2227.

This table covers the harness connectors at the Door Lock Actuator. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Door Lock Actuator Connector parts for the 2011 Ram 3500 come from 3 brands — ROSTRA, STANDARD MOTOR PRODUCTS and WELLS. Every part fits both the 5.7L V8 and the 6.7L L6 DIESEL Turbocharged.

This group includes ROSTRA 610388, STANDARD MOTOR PRODUCTS S2894 and WELLS 1P2668.

This table covers the wiring-harness connectors at the Door. Typical signs include an intermittent fault that moves when you wiggle the harness, or a melted or corroded plug. Match terminal count and keyway. Repair with heat-shrink terminals, not twist-and-tape. Read more

MOPAR supplies both parts for the 2011 Ram 3500. All of them fit every engine offered in the 2011 3500.

This group includes MOPAR 68053527AB and MOPAR 68053528AB.

This table covers the harness connectors at the EGR Pressure Feedback (DPFE) Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S2937.

This table covers the harness connectors at the EGR Valve. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S3273.

This table covers the harness connectors at the Engine Block Heater. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Engine Block Heater Connector parts for the 2011 Ram 3500 come from 2 brands — MOPAR and STANDARD MOTOR PRODUCTS.

Listed part numbers: MOPAR 5148148AB, MOPAR 5148147AC and STANDARD MOTOR PRODUCTS EBH303.

This table covers the wiring-harness connectors at the Engine. Typical signs include an intermittent fault that moves when you wiggle the harness, or a melted or corroded plug. Match terminal count and keyway. Repair with heat-shrink terminals, not twist-and-tape. Read more

MOPAR supplies the 7 Engine Wiring Harness / Connector parts for the 2011 Ram 3500.

Part numbers include MOPAR 5148023AD, MOPAR 5148023AF and MOPAR 5148026AD, among others listed above.

This table covers the harness connectors at the Exhaust Gas Temperature (EGT) Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Exhaust Gas Temperature (EGT) Sensor Connector parts for the 2011 Ram 3500 come from 2 brands — STANDARD MOTOR PRODUCTS and WALKER PRODUCTS.

This group includes STANDARD MOTOR PRODUCTS S3159, STANDARD MOTOR PRODUCTS S2052 and WALKER PRODUCTS 2701132.

This table covers the harness connectors at the Fog / Driving Lamp. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

6 Fog / Driving Lamp Connector parts for the 2011 Ram 3500 come from 5 brands — STANDARD MOTOR PRODUCTS, ACDELCO, MOPAR and 2 other brands. The "Popular" part is STANDARD MOTOR PRODUCTS HP3970. Every part fits both the 5.7L V8 and the 6.7L L6 DIESEL Turbocharged.

This group includes STANDARD MOTOR PRODUCTS HP3970, STANDARD MOTOR PRODUCTS S524 and ACDELCO LS255 and the remaining parts above.

This table covers the harness connectors at the Fog / Driving Lamp Relay. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Fog / Driving Lamp Relay Connector parts are listed for the 2011 Ram 3500, from STANDARD MOTOR PRODUCTS and UNITED MOTOR PRODUCTS. All of them fit every engine offered in the 2011 3500.

Part numbers include STANDARD MOTOR PRODUCTS S869 and UNITED MOTOR PRODUCTS CON182.

This table covers the harness connectors at the Fuel Injection Pressure Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S1458.

This table covers the harness connectors at the Fuel Injector. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

7 Fuel Injector Connector parts for the 2011 Ram 3500 come from 6 brands — STANDARD MOTOR PRODUCTS, WELLS, GB REMANUFACTURING and 3 other brands. The "Popular" part is STANDARD MOTOR PRODUCTS HP4347. 2 parts fit every engine; the other 5 are engine-specific.

Part numbers include STANDARD MOTOR PRODUCTS HP4347, WELLS 1P1344 and GB REMANUFACTURING 5191, among others listed above.

This table covers the harness connectors at the Fuel Rail. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S1038.

This table covers the harness connectors at the Fuel Sending Unit. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S1410.

This table covers the harness connectors at the Headlamp Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: WELLS 1P1612.

This table covers the wiring-harness connectors at the Headlamp. Typical signs include an intermittent fault that moves when you wiggle the harness, or a melted or corroded plug. Match terminal count and keyway. Repair with heat-shrink terminals, not twist-and-tape. Read more

7 Headlamp Wiring Harness / Connector parts are listed for the 2011 Ram 3500, from STANDARD MOTOR PRODUCTS, DORMAN and SKP. STANDARD MOTOR PRODUCTS LWH104 carries the "Popular" badge. All of them fit every engine offered in the 2011 3500.

This group includes STANDARD MOTOR PRODUCTS LWH104, STANDARD MOTOR PRODUCTS LWH106 and DORMAN 926384 and the remaining parts above.

This table covers the harness connectors at the Heater Core Temperature Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S2478.

This table covers the harness connectors at the Ignition Coil. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Ignition Coil Connector parts for the 2011 Ram 3500 come from 2 brands — STANDARD MOTOR PRODUCTS and UNITED MOTOR PRODUCTS.

Listed part numbers: STANDARD MOTOR PRODUCTS S2087 and UNITED MOTOR PRODUCTS CON60.

This table covers the harness connectors at the Instrument Panel Dimmer Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2011 Ram 3500 — WELLS 1P1612.

This table covers the harness connectors at the Intake Manifold Runner Control Valve / Solenoid. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2011 Ram 3500 — STANDARD MOTOR PRODUCTS S3045.

This table covers the harness connectors at the Knock / Detonation Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Knock / Detonation Sensor Connector parts for the 2011 Ram 3500 come from 2 brands — WALKER PRODUCTS and WELLS. 1 part fits every engine; the other 1 is engine-specific.

Listed part numbers: WALKER PRODUCTS 2701034 and WELLS 1P1347.

This table covers the harness connectors at the Manifold Pressure (MAP) Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S2816.

This table covers the harness connectors at the Mass Air Flow (MAF) Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2011 Ram 3500 — STANDARD MOTOR PRODUCTS S949.

This table covers the harness connectors at the NOx (Nitrogen Oxide) Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 NOx (Nitrogen Oxide) Sensor Connector parts are listed for the 2011 Ram 3500, from STANDARD MOTOR PRODUCTS and UNITED MOTOR PRODUCTS.

Part numbers include STANDARD MOTOR PRODUCTS S1461, STANDARD MOTOR PRODUCTS S2891 and UNITED MOTOR PRODUCTS CON222.

This table covers the harness connectors at the Oil Pressure Sender / Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

9 Oil Pressure Sender / Switch Connector parts are listed for the 2011 Ram 3500, from STANDARD MOTOR PRODUCTS, UNITED MOTOR PRODUCTS, WELLS and 3 other brands. STANDARD MOTOR PRODUCTS HP3925 carries the "Popular" badge. 5 parts fit every engine; the other 4 are engine-specific.

This group includes STANDARD MOTOR PRODUCTS HP3925, UNITED MOTOR PRODUCTS CON58 and WELLS 1P1080 and the remaining parts above.

This table covers the harness connectors at the Oil Temperature Sender. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2011 Ram 3500 — WELLS 1P2227.

This table covers the harness connectors at the Oxygen (O2) Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Oxygen (O2) Sensor Connector parts for the 2011 Ram 3500 come from 2 brands — STANDARD MOTOR PRODUCTS and WELLS.

Listed part numbers: STANDARD MOTOR PRODUCTS S1419 and WELLS 1P3360.

This table covers the harness connectors at the Parking / Turn Signal Lamp. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

4 Parking / Turn Signal Lamp Connector parts for the 2011 Ram 3500 come from 3 brands — STANDARD MOTOR PRODUCTS, DORMAN and WELLS. Every part fits both the 5.7L V8 and the 6.7L L6 DIESEL Turbocharged.

Listed part numbers: DORMAN 645943, STANDARD MOTOR PRODUCTS S2983 and STANDARD MOTOR PRODUCTS S3076, plus the other parts above.

This table covers the harness connectors at the Parking Aid Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S1497.

This table covers the harness connectors at the Parking Brake Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Parking Brake Switch Connector parts are listed for the 2011 Ram 3500, from FAMOUS BRAND and WELLS. All of them fit every engine offered in the 2011 3500.

Listed part numbers: FAMOUS BRAND PTA3009 and WELLS 1P2226.

This table covers the harness connectors at the Parking Lamp Relay. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Parking Lamp Relay Connector parts are listed for the 2011 Ram 3500, from STANDARD MOTOR PRODUCTS and UNITED MOTOR PRODUCTS. All of them fit every engine offered in the 2011 3500.

Listed part numbers: STANDARD MOTOR PRODUCTS S869 and UNITED MOTOR PRODUCTS CON182.

This table covers the harness connectors at the Power Window Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2011 Ram 3500 — STANDARD MOTOR PRODUCTS S2093.

This table covers the harness connectors at the Radiator Fan Motor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S3023.

This table covers the harness connectors at the Radiator Fan Relay. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Radiator Fan Relay Connector parts for the 2011 Ram 3500 come from 2 brands — STANDARD MOTOR PRODUCTS and UNITED MOTOR PRODUCTS. Every part fits both the 5.7L V8 and the 6.7L L6 DIESEL Turbocharged.

Part numbers include STANDARD MOTOR PRODUCTS S869 and UNITED MOTOR PRODUCTS CON182.

This table covers the harness connectors at the Radio. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

METRA supplies both parts for the 2011 Ram 3500. All of them fit every engine offered in the 2011 3500.

This group includes METRA AXRSEHCH1 and METRA AXADBXHCH2.

This table covers the Repair harnesses. Read more

2 Repair Harness parts for the 2011 Ram 3500 come from ROSTRA. Every part fits both the 5.7L V8 and the 6.7L L6 DIESEL Turbocharged.

This group includes ROSTRA 3500172 and ROSTRA 3500170.

This table covers the harness connectors at the Seat Heater. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Seat Heater Connector parts for the 2011 Ram 3500 come from 2 brands — ROSTRA and WELLS. Every part fits both the 5.7L V8 and the 6.7L L6 DIESEL Turbocharged.

Listed part numbers: ROSTRA 610977 and WELLS 1P2228.

This table covers the harness connectors at the Speed Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

5 Speed Sensor Connector parts are listed for the 2011 Ram 3500, from WALKER PRODUCTS, STANDARD MOTOR PRODUCTS, ULTRA-POWER and 2 other brands. WALKER PRODUCTS 2701055 carries the "Popular" badge. All of them fit every engine offered in the 2011 3500.

Listed part numbers: WALKER PRODUCTS 2701055 and STANDARD MOTOR PRODUCTS S1530, plus the other parts above.

This table covers the harness connectors at the Starter Motor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Starter Motor Connector parts for the 2011 Ram 3500 come from 2 brands — STANDARD MOTOR PRODUCTS and UNITED MOTOR PRODUCTS. Every part fits both the 5.7L V8 and the 6.7L L6 DIESEL Turbocharged.

This group includes STANDARD MOTOR PRODUCTS S869 and UNITED MOTOR PRODUCTS CON182.

This table covers the harness connectors at the Starter Solenoid. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S3075.

This table covers the harness connectors at the Steering Wheel Position Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

One part is listed for the 2011 Ram 3500 — STANDARD MOTOR PRODUCTS S2468.

This table covers the wiring-harness connectors at the Tailgate. Typical signs include an intermittent fault that moves when you wiggle the harness, or a melted or corroded plug. Match terminal count and keyway. Repair with heat-shrink terminals, not twist-and-tape. Read more

This group shows a single part: MOPAR 68050963AA.

This table covers the harness connectors at the Temperature Sender / Sensor. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

9 Temperature Sender / Sensor Connector parts for the 2011 Ram 3500 come from 7 brands — STANDARD MOTOR PRODUCTS, SKP, ACDELCO and 4 other brands. The "Popular" part is SKP SKTX3A. 3 parts fit every engine; the other 6 are engine-specific.

This group includes SKP SKTX3A, STANDARD MOTOR PRODUCTS TX3A and ACDELCO PT2386 and the remaining parts above.

This table covers the harness connectors at the Throttle Control Actuator. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS S2839.

This table covers the harness connectors at the Throttle Position Sensor (TPS). Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Throttle Position Sensor (TPS) Connector parts are listed for the 2011 Ram 3500, from DORMAN and WELLS. 1 part fits every engine; the other 1 is engine-specific.

Listed part numbers: DORMAN 645233 and WELLS 1P2225.

This table covers the harness connectors at the Trailer Adapter. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

2 Trailer Adapter Connector parts for the 2011 Ram 3500 come from 2 brands — CURT and MOPAR. 1 part fits every engine; the other 1 is engine-specific.

Listed part numbers: CURT 57101 and MOPAR 56019823.

This table covers the harness connectors at the Trailer Brake Switch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Trailer Brake Switch Connector parts for the 2011 Ram 3500 come from 2 brands — CURT and TEKONSHA. Every part fits both the 5.7L V8 and the 6.7L L6 DIESEL Turbocharged.

Part numbers include CURT 51438, CURT 51439 and TEKONSHA 3021.

This table covers the trailer-lighting connectors at the hitch. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

20 Trailer Connector parts are listed for the 2011 Ram 3500, from CURT, MOPAR, STANDARD MOTOR PRODUCTS and 4 other brands. CURT 56415 carries the "Popular" badge. 19 parts fit every engine; the other 1 is engine-specific.

This table covers the harness connectors at the Trailer Extension. Typical signs include an intermittent fault that moves when you wiggle the plug, green corrosion, or a melted housing. Match terminal count and keyway, not just color. Many families look identical and will not lock. Read more

3 Trailer Extension Connector parts for the 2011 Ram 3500 come from CURT. Every part fits both the 5.7L V8 and the 6.7L L6 DIESEL Turbocharged.

Listed part numbers: CURT 56475, CURT 56070010 and CURT 56000010.