2011 Ram 3500 Engine Parts

This table covers the Barometric pressure sensors. Typical signs include a check-engine light for MAP or fuel-rail pressure, or a limp mode under load. A vacuum leak or a clogged reference line will fake a bad pressure sensor. Read more

4 Barometric Pressure Sensor parts are listed for the 2011 Ram 3500, from HOLSTEIN, WELLS, STANDARD MOTOR PRODUCTS and 1 other brand.

In the Economy grade, HOLSTEIN and WELLS supply 2 parts: the catalog's value-priced group. A representative part number is HOLSTEIN 2MAP0143.

The Standard Replacement section lists 2 options from STANDARD MOTOR PRODUCTS and WALKER PRODUCTS — built to original-equipment specification. STANDARD MOTOR PRODUCTS AS414 is listed in this group.

This group includes HOLSTEIN 2MAP0143, WELLS 5S9119 and STANDARD MOTOR PRODUCTS AS414 and the remaining parts above.

This table covers the camshafts that open the valves. Read more

6 Camshaft parts are listed for the 2011 Ram 3500, from MELLING and SKP. MELLING MC1403 carries the "Popular" badge.

In the High Performance grade, MELLING supplies 4 parts: engineered beyond original-equipment specification. A representative part number is MELLING 23107.

The Standard Replacement section: 2 options from MELLING and SKP. MELLING MC1403 is listed in this group.

Listed part numbers: MELLING MC1403, MELLING 23107 and MELLING 23108, plus the other parts above.

This table covers the Camshaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

9 Camshaft Bearing parts are listed for the 2011 Ram 3500, from ENGINETECH, SEALED POWER, DURA-BOND and 1 other brand. ENGINETECH CC487 carries the "Popular" badge.

This group includes ENGINETECH CC487, SEALED POWER 1935M and DURA-BOND PD41 and the remaining parts above.

This table covers the Camshaft hardware kits. Read more

ENGINETECH supplies both parts for the 2011 Ram 3500.

Part numbers include ENGINETECH HK120 and ENGINETECH HK1204.

This table covers the Camshaft plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

2 Camshaft Plug parts are listed for the 2011 Ram 3500, from MELLING and MOPAR.

Part numbers include MELLING MEP334 and MOPAR 6507663AA.

This table covers the Camshaft Retainer / Thrust plates. Typical signs include warpage, cracks, or a plate that no longer locates the assembly. Confirm which plate the notes describe — backing plates, clutch plates and strike plates are different parts. Read more

2 Camshaft Retainer / Thrust Plate parts for the 2011 Ram 3500 come from 2 brands — MELLING and MOPAR.

This group includes MELLING MD200 and MOPAR 53022178AE.

This table covers the Circular / Semi-Circular plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

This group shows a single part: ELRING B16450.

This table covers the connecting rods between each piston and the crankshaft. Read more

ENGINETECH supplies both parts for the 2011 Ram 3500.

Part numbers include ENGINETECH ECR112 and ENGINETECH ECR112N.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

7 Connecting Rod Bearing parts are listed for the 2011 Ram 3500, from MAHLE / CLEVITE, KING ENGINE BEARINGS and ENGINETECH. ENGINETECH BB201J carries the "Popular" badge.

High Performance: 3 parts, from MAHLE / CLEVITE. A representative part number is MAHLE / CLEVITE CB1873H.

The Standard Replacement section: 4 options from KING ENGINE BEARINGS, ENGINETECH and MAHLE / CLEVITE. ENGINETECH BB201J is listed in this group.

This group includes ENGINETECH BB201J, MAHLE / CLEVITE CB1873H and MAHLE / CLEVITE CB1873HX and the remaining parts above.

This table covers the Connecting Rod bolts. Read more

This group shows a single part: MOPAR 6506335AA.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

15 Conversion / Lower Gasket Set parts are listed for the 2011 Ram 3500, from ENGINETECH, FEL-PRO, MAHLE / CLEVITE and 6 other brands. ENGINETECH CR345CSA carries the "Popular" badge.

This table covers the crankshafts that turn piston motion into rotation. Read more

2 Crankshaft parts are listed for the 2011 Ram 3500, from ENGINETECH and MOPAR.

This group includes ENGINETECH 139650 and MOPAR 53021302BC.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

19 Crankshaft Main Bearing parts for the 2011 Ram 3500 come from 5 brands — MAHLE / CLEVITE, MOPAR, ENGINETECH and 2 other brands. The "Popular" part is MAHLE / CLEVITE MS2328H.

The High Performance section: 9 options from MAHLE / CLEVITE. MAHLE / CLEVITE MS2328H is listed in this group.

Standard Replacement: 10 parts, from MAHLE / CLEVITE, MOPAR, ENGINETECH and 2 other brands. A representative part number is ENGINETECH BC115J.

This table covers the Crankshaft Main Bearing Cap bolts. Read more

One part is listed for the 2011 Ram 3500 — ARP 2445400.

This table covers the wear sleeves used to restore a Crankshaft Main Bearing seal surface. Read more

One part is listed for the 2011 Ram 3500 — VICTOR REINZ 711347800.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

4 Crankshaft Repair Sleeve parts for the 2011 Ram 3500 come from 3 brands — FEL-PRO, MAHLE / CLEVITE and TIMKEN.

Listed part numbers: FEL-PRO 16230, FEL-PRO 16274 and MAHLE / CLEVITE A351, plus the other parts above.

This table covers the Crankshaft Repair Sleeve tools. This is a service tool, not a wear part — match the application in the notes. Read more

4 Crankshaft Repair Sleeve Tool parts for the 2011 Ram 3500 come from 2 brands — FEL-PRO and VICTOR REINZ.

Part numbers include FEL-PRO 16328, FEL-PRO 16319 and VICTOR REINZ 711620300, among others listed above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

37 Crankshaft Seal parts for the 2011 Ram 3500 come from 13 brands — APEX, FEL-PRO, MAHLE / CLEVITE and 10 other brands. The "Popular" part is APEX ATC2751. A list this long means Crankshaft Seal applications vary by configuration — the notes carry the qualifiers.

This table covers the gaskets that seal the Crankshaft Seal. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

ELRING supplies both parts for the 2011 Ram 3500.

Part numbers include ELRING 907600 and ELRING 049640.

This table covers the Cylinder Deactivation Delete Block-Off plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

One part is listed for the 2011 Ram 3500 — MELLING MEP337.

This table covers the Cylinder Deactivation solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

This group shows a single part: WELLS 3N2001.

This table covers the cylinder heads that close the top of the block. Read more

9 Cylinder Head parts for the 2011 Ram 3500 come from 4 brands — MOPAR, ENGINETECH, CYLINDER HEAD EXPRESS and 1 other brand. The "Popular" part is MOPAR 68280503AF.

Part numbers include MOPAR 68280503AF, CYLINDER HEAD EXPRESS CH6707N and ENGINE PRO 910360, among others listed above.

This table covers the bolts that clamp the cylinder head to the block. Read more

7 Cylinder Head Bolt parts are listed for the 2011 Ram 3500, from ARP, FEL-PRO, APEX and 3 other brands. ARP 2474202 carries the "Popular" badge.

This group includes ARP 2474202, FEL-PRO ES72193 and APEX AHB1158 and the remaining parts above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Cylinder Head Gasket parts are listed for the 2011 Ram 3500, from FEL-PRO, ELRING, ENGINETECH and 2 other brands. FEL-PRO 26679PT carries the "Popular" badge.

This group includes FEL-PRO 26679PT, ELRING 049830 and ENGINETECH PHCU408A and the remaining parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

8 Cylinder Head Gasket Set parts are listed for the 2011 Ram 3500, from FEL-PRO, MAHLE / CLEVITE, ELRING and 3 other brands. FEL-PRO HS26679PT carries the "Popular" badge.

This group includes FEL-PRO HS26679PT, MAHLE / CLEVITE HS547741 and ELRING 746560 and the remaining parts above.

This table covers the Cylinder Head Spacer shims. Read more

One part is listed for the 2011 Ram 3500 — SBI 2302176.

This table covers the wear sleeves used to restore a Cylinder seal surface. Read more

MELLING supplies the 3 Cylinder Repair Sleeve parts for the 2011 Ram 3500.

This group includes MELLING CSL1180X, MELLING CSL1180 and MELLING CSL2280.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

5 Engine Block Heater parts for the 2011 Ram 3500 come from 3 brands — KAT'S HEATERS, STANDARD MOTOR PRODUCTS and AUTOTECNICA. The "Popular" part is STANDARD MOTOR PRODUCTS EBH303.

This group includes STANDARD MOTOR PRODUCTS EBH303, AUTOTECNICA DG1417515 and KAT'S HEATERS 30115 and the remaining parts above.

This table covers the Engine covers. Read more

MOPAR supplies both parts for the 2011 Ram 3500.

This group includes MOPAR 68196979AA and MOPAR 68196978AA.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Engine Kit Gasket Set parts are listed for the 2011 Ram 3500, from AJUSA and FEL-PRO.

Part numbers include AJUSA 50496200 and FEL-PRO 2603192.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

7 Exhaust Valve parts for the 2011 Ram 3500 come from 5 brands — QUALCAST, SBI, ENGINETECH and 2 other brands. The "Popular" part is ENGINETECH V2605.

This group includes ENGINETECH V2605, MELLING V3006 and MAHLE / CLEVITE 2114670 and the remaining parts above.

This table covers the Expansion plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

MOPAR supplies both parts for the 2011 Ram 3500.

Part numbers include MOPAR 4429568 and MOPAR 5086936AA.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

3 Harmonic Balancer parts are listed for the 2011 Ram 3500, from ATP, DAYCO and DORMAN.

Part numbers include ATP 102491, DAYCO PB1641N and DORMAN 594818.

This table covers the Harmonic Balancer bolts. Read more

This group shows a single part: ARP 1472503.

This table covers the Intake manifolds. Typical signs include an exhaust tick, a vacuum leak, or a gasket that has burned through. Replace the gaskets and hardware; a warped flange will leak with a new gasket alone. Read more

This group shows a single part: MOPAR 68038759AA.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

12 Intake Manifold Gasket parts are listed for the 2011 Ram 3500, from ELRING, MAHLE / CLEVITE, VICTOR REINZ and 2 other brands. FEL-PRO MS97362 carries the "Popular" badge.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: FEL-PRO MS97336.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

6 Intake Valve parts for the 2011 Ram 3500 come from 6 brands — ENGINETECH, MELLING, ENGINE PRO and 3 other brands. The "Popular" part is ENGINETECH V4356.

Listed part numbers: ENGINETECH V4356, MELLING V2014 and ENGINE PRO 01499012, plus the other parts above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

13 Motor Mount parts for the 2011 Ram 3500 come from 5 brands — ANCHOR, DEA / MARMON RIDE CONTROL, WESTAR and 2 other brands. The "Popular" part is ANCHOR 3410.

The Economy section: 2 options from SKP. SKP SKM3410 is listed in this group.

Standard Replacement: 11 parts, from ANCHOR, DEA / MARMON RIDE CONTROL, WESTAR and 1 other brand. A representative part number is ANCHOR 3410.

This table covers the brackets that mount the Motor Mount. Typical signs include a cracked mount, a rattle, or a bracket that no longer holds alignment. Confirm position in the notes. Many brackets look alike and bolt to different corners. Read more

2 Motor Mount Bracket parts for the 2011 Ram 3500 come from MOPAR.

This group includes MOPAR 52121815AB and MOPAR 52121809AE.

This table covers the Motor Mount kits. Read more

2 Motor Mount Kit parts for the 2011 Ram 3500 come from ANCHOR.

This group includes ANCHOR 300271 and ANCHOR 300272.