The 2018 Rolls-Royce Wraith has 16 wheel parts with verified fitment on this page — 2 part types and 3 brands, covering the 6.6L V12 Turbocharged engine. Each part includes a manufacturer part number and application notes.
The wheel hardware on the 2018 Rolls-Royce Wraith covers lug nuts, studs, hub caps, TPMS sensors and trim rings. All 16 listed parts are Tire Pressure Monitoring System (TPMS) Stem / Service Kit (14 parts) and Tire Pressure Monitoring System (TPMS) Sensor (2 parts).
The 2018 Rolls-Royce Wraith came with a single engine, the 6.6L V12 Turbocharged, and every part is verified against it.
3 brands supply wheel parts for the 2018 Rolls-Royce Wraith, led by BH SENS (8 parts), SCHRADER (7 parts) and ALLIGATOR (1 part). Quality grades include Valve Stem Assembly and Hardware Only.
A "Popular" badge means the source catalog flagged the part as frequently chosen for the 2018 Rolls-Royce Wraith. 3 parts have it, including BH SENS RDV021 (Tire Pressure Monitoring System (TPMS) Stem / Service Kit) and BH SENS RDV026 (Tire Pressure Monitoring System (TPMS) Stem / Service Kit). Each part number opens a page with every vehicle that part fits.
Tire Pressure Monitoring System (TPMS) Sensor
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BH SENS | RDE012V21 | 🇺🇸 US 🇨🇦 CA | OE Quality 433MHZ Replacement SensorNo Programming Required | View on Amazon |
| SCHRADER | 29071 | 🇺🇸 US 🇨🇦 CA | ProgrammedValve Material: Aluminum | View on Amazon |
This table covers the TPMS sensors mounted in each wheel. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors.
2 Tire Pressure Monitoring System (TPMS) Sensor parts are listed for the 2018 Rolls-Royce Wraith, from BH SENS and SCHRADER.
Listed part numbers: BH SENS RDE012V21 and SCHRADER 29071.
Tire Pressure Monitoring System (TPMS) Stem / Service Kit
Hardware Only
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SCHRADER | 20023 | 🇺🇸 US 🇨🇦 CA | Clamp-In componentsPack of 50 | View on Amazon |
Valve Stem Assembly
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BH SENS Popular | RDV021 | 🇺🇸 US 🇨🇦 CA | Flexible Angle MetalSilver 43mm | View on Amazon |
| BH SENS Popular | RDV026 | 🇺🇸 US 🇨🇦 CA | Flexible Angle MetalBlack 43mm | View on Amazon |
| SCHRADER Popular | 20049 | 🇺🇸 US 🇨🇦 CA | Clamp-In componentsPack of 50 | View on Amazon |
| BH SENS | RDV022 | 🇺🇸 US 🇨🇦 CA | Flexible Angle MetalSilver 48mm | View on Amazon |
| BH SENS | RDV023 | 🇺🇸 US 🇨🇦 CA | Flexible Angle MetalSilver 49mm | View on Amazon |
| BH SENS | RDV027 | 🇺🇸 US 🇨🇦 CA | Flexible Angle MetalTitanium 43mm | View on Amazon |
| BH SENS | RDV024 | 🇺🇸 US 🇨🇦 CA | Flexible Angle MetalSilver 51mm | View on Amazon |
| BH SENS | RDV025 | 🇺🇸 US 🇨🇦 CA | Flexible Angle MetalSilver 56mm | View on Amazon |
| SCHRADER | 20037 | 🇺🇸 US 🇨🇦 CA | Clamp-In valve assembly componentsValve Measurement 43.0mm | View on Amazon |
| SCHRADER | 20038 | 🇺🇸 US 🇨🇦 CA | Clamp-In valve assembly componentsValve Measurement 48.0mm | View on Amazon |
| SCHRADER | 20040 | 🇺🇸 US 🇨🇦 CA | Clamp-In valve assembly componentsValve Measurement 51.0mm | View on Amazon |
| SCHRADER | 20039 | 🇺🇸 US 🇨🇦 CA | Clamp-In valve assembly componentsValve Measurement 49.0mm | View on Amazon |
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ALLIGATOR | 591305 | 🇺🇸 US 🇨🇦 CA | Tire Pressure Monitoring System Sensor Service KitOE Valves with Torx Screw | View on Amazon |
This table covers TPMS valve stems and the service kits used when a tire is changed.
14 Tire Pressure Monitoring System (TPMS) Stem / Service Kit parts for the 2018 Rolls-Royce Wraith come from 3 brands — BH SENS, SCHRADER and ALLIGATOR. The "Popular" part is BH SENS RDV021.
The Hardware Only section lists 1 option from SCHRADER — grouped under the catalog's "Hardware Only" designation — the notes column spells out what sets them apart. SCHRADER 20023 is listed in this group.
In the Valve Stem Assembly grade, BH SENS and SCHRADER supply 12 parts: grouped under the catalog's "Valve Stem Assembly" designation — the notes column spells out what sets them apart. A representative part number is BH SENS RDV021.
1 further part sits outside the graded sections, with the same engine-level match.
Buying Wheel Parts for a 2018 Rolls-Royce Wraith
On this vehicle, the wheel hardware covers lug nuts, studs, hub caps, TPMS sensors and trim rings.
- Confirm you have the 6.6L V12 Turbocharged engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the TPMS service kit (valve core, seal, nut) with every tire change on sensor-equipped wheels.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Tire Pressure Monitoring System (TPMS) Stem / Service Kit and Tire Pressure Monitoring System (TPMS) Sensor .
Frequently Asked Questions
How many wheel parts fit the 2018 Rolls-Royce Wraith?
Our catalog currently lists 16 wheel parts for the 2018 Rolls-Royce Wraith across 2 subcategories and 3 brands, covering the 6.6L V12 Turbocharged engine. Each part is matched to the engine(s) it fits.
What are the signs of wheel problems on a 2018 Rolls-Royce Wraith?
Common symptoms include a TPMS light that will not clear, vibration after a wheel was serviced, or studs damaged by past over-torquing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the TPMS service kit (valve core, seal, nut) with every tire change on sensor-equipped wheels.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2018 Rolls-Royce Wraith was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2018 Rolls-Royce Wraith?
Every part on this page is matched to the 6.6L V12 Turbocharged engine. Then always torque lug nuts to spec in a star pattern — impact guns without torque sticks warp rotors and stretch studs. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2018 Rolls-Royce Wraith
Wheel Parts for Other Rolls-Royce Wraith Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.