1987 Saab 900 Automatic Transmission Parts

This table covers the Clutch Plate and Housing assemblies. Read more

PROFESSIONAL PARTS SWEDEN supplies both parts for the 1987 Saab 900.

Listed part numbers: PROFESSIONAL PARTS SWEDEN 41341304S and PROFESSIONAL PARTS SWEDEN 41341239S.

This table covers the replacement filters for this application — the table heading and notes say which circuit. Typical signs include restricted flow — long cranking, weak airflow, or dirty fluid after a short interval. Seat the new filter so it cannot bypass, and use the grade the notes call for. Read more

2 Filter parts for the 1987 Saab 900 come from 2 brands — PROFESSIONAL PARTS SWEDEN and RAYBESTOS POWERTRAIN. Every part fits both the 2.0L L4 SOHC and the 2.0L L4 Turbocharged.

Part numbers include PROFESSIONAL PARTS SWEDEN 22344125 and RAYBESTOS POWERTRAIN 515502.

This table covers the Fluid Cooler Line hoses. Typical signs include swelling, cracks, a soft spot, or a leak at a clamp. Replace adjacent aged hoses while the system is drained — they share the same heat cycle. Read more

This group shows a single part: SUNSONG 5801353.

This table covers the precision wear sleeves used to restore a transmission pump seal surface. Read more

One part is listed for the 1987 Saab 900 — SKF 99168.

This table covers the seals at the Fluid Pump. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 1987 Saab 900 — SKF 16692.

This table covers the wear sleeves used to restore a Output Shaft seal surface. Read more

4 Output Shaft Repair Sleeve parts for the 1987 Saab 900 come from 4 brands — BCA, NATIONAL, SKF and 1 other brand.

This group includes BCA NS99139 and NATIONAL 99139 and the remaining parts above.

This table covers the seals at the Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Output Shaft Seal parts for the 1987 Saab 900 come from 4 brands — BCA, NATIONAL, SKF and 1 other brand.

Listed part numbers: BCA NS223510, NATIONAL 223510 and SKF 13945, plus the other parts above.

This table covers the Pinion bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

4 Pinion Bearing parts are listed for the 1987 Saab 900, from WJB / INMOTION PARTS, BCA, NATIONAL and 1 other brand.

In the Economy grade, WJB / INMOTION PARTS supplies 1 part: the catalog's value-priced group. A representative part number is WJB / INMOTION PARTS WTA35.

The Standard Replacement section lists 3 options from BCA, NATIONAL and SCHAEFFLER — built to original-equipment specification. BCA NBA35 is listed in this group.

This group includes WJB / INMOTION PARTS WTA35, BCA NBA35 and NATIONAL A35 and the remaining parts above.

This table covers the seals at the Pinion. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: SCHAEFFLER LM501310.

This table covers the rebuild kits for this assembly. Read more

2 Rebuild Kit parts are listed for the 1987 Saab 900, from PA CARGO and PIONEER.

This group includes PA CARGO K19900G and PIONEER 750071.

This table covers the wear sleeves used to restore a Torque Converter seal surface. Read more

3 Torque Converter Repair Sleeve parts are listed for the 1987 Saab 900, from SCHAEFFLER, TIMKEN and WJB / INMOTION PARTS.

This group includes SCHAEFFLER SR3491, TIMKEN KWK99168 and WJB / INMOTION PARTS WS99168.

This table covers the seals at the Torque Converter Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Torque Converter Shaft Seal parts are listed for the 1987 Saab 900, from TIMKEN and WJB / INMOTION PARTS.

Listed part numbers: TIMKEN 480479H and WJB / INMOTION PARTS WS480479H.

This table covers the Transfer Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

One part is listed for the 1987 Saab 900 — BCA NB206.

This table covers the automatic-transmission fluids specified for this gearbox. Typical signs include harsh or delayed shifts, fluid that smells burnt, or a shudder at light throttle. Use exactly the specification in the notes. Automatic transmissions are unforgiving of the wrong fluid. Read more

5 Transmission Fluid parts for the 1987 Saab 900 come from 2 brands — VALVOLINE and LUBEGARD. The "Popular" part is VALVOLINE VV3246.

Part numbers include VALVOLINE VV3246, LUBEGARD 62101 and LUBEGARD 62132, among others listed above.

This table covers the mounts that hold the transmission to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

One part is listed for the 1987 Saab 900 — WESTAR EM5488.