1988 Saab 900 Automatic Transmission Parts

This table covers the Clutch Plate and Housing assemblies. Read more

2 Clutch Plate and Housing Assembly parts for the 1988 Saab 900 come from PROFESSIONAL PARTS SWEDEN.

This group includes PROFESSIONAL PARTS SWEDEN 41341304S and PROFESSIONAL PARTS SWEDEN 41341239S.

This table covers the replacement filters for this application — the table heading and notes say which circuit. Typical signs include restricted flow — long cranking, weak airflow, or dirty fluid after a short interval. Seat the new filter so it cannot bypass, and use the grade the notes call for. Read more

2 Filter parts are listed for the 1988 Saab 900, from PROFESSIONAL PARTS SWEDEN and RAYBESTOS POWERTRAIN. All of them fit every engine offered in the 1988 900.

Listed part numbers: PROFESSIONAL PARTS SWEDEN 22344125 and RAYBESTOS POWERTRAIN 515502.

This table covers the Fluid Cooler Line hoses. Typical signs include swelling, cracks, a soft spot, or a leak at a clamp. Replace adjacent aged hoses while the system is drained — they share the same heat cycle. Read more

One part is listed for the 1988 Saab 900 — SUNSONG 5801353.

This table covers the precision wear sleeves used to restore a transmission pump seal surface. Read more

This group shows a single part: SKF 99168.

This table covers the seals at the Fluid Pump. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: SKF 16692.

This table covers the wear sleeves used to restore a Output Shaft seal surface. Read more

4 Output Shaft Repair Sleeve parts are listed for the 1988 Saab 900, from BCA, NATIONAL, SKF and 1 other brand. All of them fit every engine offered in the 1988 900.

This group includes BCA NS99139 and NATIONAL 99139 and the remaining parts above.

This table covers the seals at the Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Output Shaft Seal parts are listed for the 1988 Saab 900, from BCA, NATIONAL, SKF and 1 other brand. All of them fit every engine offered in the 1988 900.

Listed part numbers: BCA NS223510, NATIONAL 223510 and SKF 13945, plus the other parts above.

This table covers the Pinion bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

4 Pinion Bearing parts for the 1988 Saab 900 come from 4 brands — WJB / INMOTION PARTS, BCA, NATIONAL and 1 other brand. Every part fits both the 2.0L L4 SOHC and the 2.0L L4 Turbocharged.

The Economy section lists 1 option from WJB / INMOTION PARTS — the catalog's value-priced group. WJB / INMOTION PARTS WTA35 is listed in this group.

In the Standard Replacement grade, BCA, NATIONAL and SCHAEFFLER supply 3 parts: built to original-equipment specification. A representative part number is BCA NBA35.

Part numbers include WJB / INMOTION PARTS WTA35, BCA NBA35 and NATIONAL A35, among others listed above.

This table covers the seals at the Pinion. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 1988 Saab 900 — SCHAEFFLER LM501310.

This table covers the rebuild kits for this assembly. Read more

2 Rebuild Kit parts for the 1988 Saab 900 come from 2 brands — PA CARGO and PIONEER. Every part fits both the 2.0L L4 SOHC and the 2.0L L4 Turbocharged.

This group includes PA CARGO K19900G and PIONEER 750071.

This table covers the wear sleeves used to restore a Torque Converter seal surface. Read more

3 Torque Converter Repair Sleeve parts for the 1988 Saab 900 come from 3 brands — SCHAEFFLER, TIMKEN and WJB / INMOTION PARTS. Every part fits both the 2.0L L4 SOHC and the 2.0L L4 Turbocharged.

Part numbers include SCHAEFFLER SR3491, TIMKEN KWK99168 and WJB / INMOTION PARTS WS99168.

This table covers the seals at the Torque Converter Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Torque Converter Shaft Seal parts for the 1988 Saab 900 come from 2 brands — TIMKEN and WJB / INMOTION PARTS. Every part fits both the 2.0L L4 SOHC and the 2.0L L4 Turbocharged.

Part numbers include TIMKEN 480479H and WJB / INMOTION PARTS WS480479H.

This table covers the Transfer Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

This group shows a single part: BCA NB206.

This table covers the automatic-transmission fluids specified for this gearbox. Typical signs include harsh or delayed shifts, fluid that smells burnt, or a shudder at light throttle. Use exactly the specification in the notes. Automatic transmissions are unforgiving of the wrong fluid. Read more

5 Transmission Fluid parts are listed for the 1988 Saab 900, from VALVOLINE and LUBEGARD. VALVOLINE VV3246 carries the "Popular" badge. All of them fit every engine offered in the 1988 900.

This group includes VALVOLINE VV3246, LUBEGARD 62101 and LUBEGARD 62132 and the remaining parts above.

This table covers the conditioners and additives used with this transmission fluid. Read more

LUBEGARD supplies the 8 Transmission Fluid Additive parts for the 1988 Saab 900. LUBEGARD 19610 carries the "Popular" badge. All of them fit every engine offered in the 1988 900.

Part numbers include LUBEGARD 19610, LUBEGARD 60902 and LUBEGARD 19689, among others listed above.

This table covers the mounts that hold the transmission to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

2 Transmission Mount parts for the 1988 Saab 900 come from 2 brands — DEA / MARMON RIDE CONTROL and WESTAR. 1 part fits every engine; the other 1 is engine-specific.

Listed part numbers: DEA / MARMON RIDE CONTROL A7039 and WESTAR EM5488.