1992 Saab 9000 Engine Parts

This table covers the chains that drive the balance shafts. Read more

This group shows a single part: PROFESSIONAL PARTS SWEDEN 21345105.

This table covers the guides that keep the balance-shaft chain on its path. Read more

This group shows a single part: PROFESSIONAL PARTS SWEDEN 21344315.

This table covers the camshafts that open the valves. Read more

2 Camshaft parts for the 1992 Saab 9000 come from AJUSA.

This group includes AJUSA 93037100 and AJUSA 93037200.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

3 Connecting Rod Bearing parts for the 1992 Saab 9000 come from 2 brands — PROFESSIONAL PARTS SWEDEN and ITM ENGINE COMPONENTS.

Listed part numbers: ITM ENGINE COMPONENTS 4B9023, PROFESSIONAL PARTS SWEDEN 21347650 and PROFESSIONAL PARTS SWEDEN 21347651.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Conversion / Lower Gasket Set parts for the 1992 Saab 9000 come from 2 brands — AJUSA and APEX.

Part numbers include AJUSA 54053800 and APEX ACS9023.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

8 Crankshaft Repair Sleeve parts are listed for the 1992 Saab 9000, from SCHAEFFLER, NATIONAL, WJB / INMOTION PARTS and 2 other brands. SCHAEFFLER SR3506 carries the "Popular" badge.

Listed part numbers: SCHAEFFLER SR3506, TIMKEN KWK99187 and BCA NS99189, plus the other parts above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

15 Crankshaft Seal parts are listed for the 1992 Saab 9000, from ELRING, TIMKEN, PROFESSIONAL PARTS SWEDEN and 7 other brands. ELRING 330965 carries the "Popular" badge.

This table covers the Crankshaft Thrust washers. Read more

This group shows a single part: PROFESSIONAL PARTS SWEDEN 21348793.

This table covers the bolts that clamp the cylinder head to the block. Read more

3 Cylinder Head Bolt parts for the 1992 Saab 9000 come from 3 brands — AJUSA, ELRING and VICTOR REINZ.

This group includes AJUSA 81012000, ELRING 221280 and VICTOR REINZ 143222701.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Cylinder Head Gasket parts for the 1992 Saab 9000 come from 5 brands — ELRING, AJUSA, APEX and 2 other brands. The "Popular" part is ELRING 586598.

Part numbers include ELRING 586598, ELRING 894054 and AJUSA 10032400, among others listed above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

6 Cylinder Head Gasket Set parts for the 1992 Saab 9000 come from 6 brands — APEX, ELRING, AJUSA and 3 other brands. The "Popular" part is APEX AHS9023.

Part numbers include APEX AHS9023, ELRING 261270 and AJUSA 52094200, among others listed above.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

One part is listed for the 1992 Saab 9000 — KAT'S HEATERS 11436.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

This group shows a single part: AJUSA 50107100.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

2 Exhaust Valve parts are listed for the 1992 Saab 9000, from ITM ENGINE COMPONENTS and PROFESSIONAL PARTS SWEDEN.

Part numbers include ITM ENGINE COMPONENTS RX9465 and PROFESSIONAL PARTS SWEDEN 21341767.

This table covers the Expansion plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes. Read more

This group shows a single part: DORMAN 570006.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

4 Harmonic Balancer parts for the 1992 Saab 9000 come from 3 brands — DORMAN, ATP and PIONEER.

Listed part numbers: ATP 102306, DORMAN 594863 and DORMAN 594247S, plus the other parts above.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Intake Manifold Gasket parts for the 1992 Saab 9000 come from 3 brands — PROFESSIONAL PARTS SWEDEN, ELRING and APEX. The "Popular" part is PROFESSIONAL PARTS SWEDEN 61345208.

Listed part numbers: PROFESSIONAL PARTS SWEDEN 61345208, APEX AMS9230 and ELRING 922448, plus the other parts above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

7 Motor Mount parts are listed for the 1992 Saab 9000, from PROFESSIONAL PARTS SWEDEN, DEA / MARMON RIDE CONTROL, WESTAR and 1 other brand. DEA / MARMON RIDE CONTROL A7046 carries the "Popular" badge.

In the Economy grade, PROFESSIONAL PARTS SWEDEN supplies 2 parts: the catalog's value-priced group. A representative part number is PROFESSIONAL PARTS SWEDEN 62349855.

The Standard Replacement section lists 5 options from DEA / MARMON RIDE CONTROL, WESTAR and ANCHOR — built to original-equipment specification. DEA / MARMON RIDE CONTROL A7046 is listed in this group.

Listed part numbers: DEA / MARMON RIDE CONTROL A7046, PROFESSIONAL PARTS SWEDEN 62349855 and PROFESSIONAL PARTS SWEDEN 62349848, plus the other parts above.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

87 Oil parts are listed for the 1992 Saab 9000, from VALVOLINE, LIQUI MOLY, MOBIL and 4 other brands. LIQUI MOLY 20228 carries the "Popular" badge. They are grouped as Conventional, Full Synthetic, Heavy Duty / Diesel, High Mileage (>75,000 Miles), Racing and Synthetic Blend, with Full Synthetic the largest group at 52 parts from LIQUI MOLY, VALVOLINE, PENTOSIN and 1 other brand.

This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant. Read more

One part is listed for the 1992 Saab 9000 — PROFESSIONAL PARTS SWEDEN 22348311.

This table covers the drain plugs in the oil pan. Read more

6 Oil Drain Plug parts are listed for the 1992 Saab 9000, from DORMAN, ELRING, PROFESSIONAL PARTS SWEDEN and 1 other brand. DORMAN 090033 carries the "Popular" badge.

Part numbers include DORMAN 090033, DORMAN 090053 and DORMAN 092020, among others listed above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Drain Plug Gasket parts for the 1992 Saab 9000 come from DORMAN.

Listed part numbers: DORMAN 097138 and DORMAN 097135.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

18 Oil Filter parts are listed for the 1992 Saab 9000, from BOSCH, PROFESSIONAL PARTS SWEDEN, VARIOUS MFR and 10 other brands. WIX 51348XP carries the "Popular" badge.

Economy: 7 parts, from PROFESSIONAL PARTS SWEDEN, BOSCH, FRAM and 3 other brands. A representative part number is BOSCH 72161WS.

In the High Performance / Heavy Duty grade, WIX supplies 1 part: grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. A representative part number is WIX 51348XP.

The Standard Replacement section: 10 options from MOTORCRAFT, DENSO, WIX and 6 other brands. DENSO 1502010 is listed in this group.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Oil Pan Gasket parts are listed for the 1992 Saab 9000, from FEL-PRO, APEX, ELRING and 2 other brands. FEL-PRO OS30659 carries the "Popular" badge.

Listed part numbers: FEL-PRO OS30659, APEX AOP923 and ELRING 514943, plus the other parts above.

This table covers the Oil Pump Drive gears. Read more

This group shows a single part: PROFESSIONAL PARTS SWEDEN 21341779.

This table covers the gaskets that seal the Oil Pump. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: FEL-PRO 72470.

This table covers the Piston Pin bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

One part is listed for the 1992 Saab 9000 — ITM ENGINE COMPONENTS RB4519.

This table covers the Rocker Arm bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

PROFESSIONAL PARTS SWEDEN supplies both parts for the 1992 Saab 9000.

Part numbers include PROFESSIONAL PARTS SWEDEN 61340168 and PROFESSIONAL PARTS SWEDEN 61340168PU.

This table covers the Timing Cam sprockets. Read more

One part is listed for the 1992 Saab 9000 — PROFESSIONAL PARTS SWEDEN 21345205.

This table covers the timing chains that keep the cams in time with the crank. Read more

This group shows a single part: PROFESSIONAL PARTS SWEDEN 21343761.

This table covers the guides and dampers that keep the timing chain on its path. Read more

2 Timing Chain Guide / Damper parts for the 1992 Saab 9000 come from PROFESSIONAL PARTS SWEDEN.

This group includes PROFESSIONAL PARTS SWEDEN 21349324 and PROFESSIONAL PARTS SWEDEN 21344248.

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

One part is listed for the 1992 Saab 9000 — PROFESSIONAL PARTS SWEDEN 21345086.

This table covers the wear sleeves used to restore a Timing Cover seal surface. Read more

One part is listed for the 1992 Saab 9000 — SKF 99184.

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 1992 Saab 9000 — SKF 18508.