1994 Saab 900 Suspension Parts

Engine:

Showing parts for every engine. Select an engine to see only what fits.

11 Suspension parts are listed for the 1994 Saab 900, in 4 part types, covering both the 2.3L L4 and the 2.5L V6. Each one has a brand, a manufacturer part number and notes that say where it fits.

The suspension system on the 1994 Saab 900 controls ride, tire contact and alignment through shocks, struts, control arms, bushings and links. The largest groups are Coil Spring (7 parts), Ball Joint (2 parts) and Bump Stop (1 part). The other 1 part type covers the remaining 1 part.

Ball Joint

Daily Driver

Brand Part Number Markets Notes Buy
MEVOTECH Fits: 2.5L V6 MK9578
🇺🇸 US 🇨🇦 CA
SupremeIncludes Hardware
Fitment notes — MEVOTECH MK9578
SupremeIncludes Hardware
Fits:
Front Upper
or:
Front Lower
View on
Amazon

Economy

Brand Part Number Markets Notes Buy
MEVOTECH Fits: 2.5L V6 GK9578
🇺🇸 US 🇨🇦 CA
Original Grade
Fitment notes — MEVOTECH GK9578
Original Grade
Fits:
Front Upper
or:
Front Lower
View on
Amazon

This table covers the ball joints that articulate each control arm at the knuckle.

Bump Stop

Brand Part Number Markets Notes Buy
PROFESSIONAL PARTS SWEDEN Fits: 2.5L V6 65349530
🇺🇸 US 🇨🇦 CA
Kit
Fitment notes — PROFESSIONAL PARTS SWEDEN 65349530
Kit
Rear
View on
Amazon

This table covers the bump stops that limit suspension travel.

Coil Spring

Brand Part Number Markets Notes Buy
LESJÖFORS Popular Fits: 2.5L V6 4077806
🇺🇸 US 🇨🇦 CA
Front
View on
Amazon
LESJÖFORS Popular Fits: 2.5L V6 4277804
🇺🇸 US 🇨🇦 CA
Rear
View on
Amazon
LESJÖFORS Fits: 2.5L V6 4277816
🇺🇸 US 🇨🇦 CA
RearHeavy Duty
View on
Amazon
LESJÖFORS Fits: 2.5L V6 5277804
🇺🇸 US 🇨🇦 CA
Tapered Wire Alternative
Fitment notes — LESJÖFORS 5277804
Tapered Wire Alternative
Rear
View on
Amazon
PROFESSIONAL PARTS SWEDEN Fits: 2.5L V6 43415826
🇺🇸 US 🇨🇦 CA
Diameter: 169 mmThickness: 12.75 mm
Fitment notes — PROFESSIONAL PARTS SWEDEN 43415826
Diameter: 169 mmThickness: 12.75 mmSpring Design: Coil Spring
View on
Amazon
SUPLEX Fits: 2.5L V6 29015
🇺🇸 US 🇨🇦 CA
FrontManual trans.
View on
Amazon
SUPLEX Fits: 2.5L V6 29024
🇺🇸 US 🇨🇦 CA
FrontAutomatic trans.
View on
Amazon

This table covers the coil springs that carry vehicle weight at each corner. Typical signs include a sagging corner, a clunk through the spring, or a broken coil that you can see from the wheel well. Replace springs in axle pairs and inspect the seats and isolators while the spring is out.

Front End Kit

Brand Part Number Markets Notes Buy
ULTRA-POWER Fits: 2.5L V6 KIT441
🇺🇸 US 🇨🇦 CA
Front
View on
Amazon

This table covers the Front End kits.

Buying Suspension Parts for a 1994 Saab 900

On this vehicle, the suspension system controls ride, tire contact and alignment through shocks, struts, control arms, bushings and links.

  • Match the engine first. Every suspension part here is engine-specific; each row shows which engine(s) it fits.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace shocks and struts in axle pairs, renew the sway-bar links with the struts, and get an alignment after any control-arm or tie-rod work.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Coil Spring and Ball Joint .

Frequently Asked Questions

How many suspension parts fit the 1994 Saab 900?

Our catalog currently lists 11 suspension parts for the 1994 Saab 900 across 4 subcategories and 5 brands, covering both the 2.3L L4 and the 2.5L V6. Each part is matched to the engine(s) it fits.

Do suspension parts differ between 1994 Saab 900 engines?

Yes. Every suspension part on this page is engine-specific. Each row shows which engine(s) it fits — use the filter at the top to hide the rest. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.

What are the signs of suspension problems on a 1994 Saab 900?

Common symptoms include clunks over speed bumps, wandering steering, cupped tire wear, or a nose that keeps bouncing after a dip. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What should I replace at the same time?

Where labor overlaps, replace shocks and struts in axle pairs, renew the sway-bar links with the struts, and get an alignment after any control-arm or tie-rod work.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1994 Saab 900 was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 1994 Saab 900?

First match the engine — each row shows which engine(s) the part fits. Then worn bushings often mimic bad shocks — inspect before buying, and remember loaded vs unloaded strut assemblies differ in labor by hours. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 1994 Saab 900

Suspension Parts for Other Saab 900 Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.