1994 Saab 900 Engine Parts

This table covers the camshafts that open the valves. Read more

This group shows a single part: AJUSA 93036500.

This table covers the wear sleeves used to restore a Camshaft seal surface. Read more

5 Camshaft Repair Sleeve parts are listed for the 1994 Saab 900, from NATIONAL, BCA, SCHAEFFLER and 2 other brands. NATIONAL 99139 carries the "Popular" badge.

Listed part numbers: NATIONAL 99139, BCA NS99139 and SCHAEFFLER SR3472, plus the other parts above.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

14 Camshaft Seal parts are listed for the 1994 Saab 900, from SCHAEFFLER, ITM ENGINE COMPONENTS, NATIONAL and 10 other brands. ITM ENGINE COMPONENTS 1501526 carries the "Popular" badge.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Conversion / Lower Gasket Set parts for the 1994 Saab 900 come from 2 brands — AJUSA and ITM ENGINE COMPONENTS.

This group includes AJUSA 54101000 and ITM ENGINE COMPONENTS 0929103.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

11 Crankshaft Repair Sleeve parts are listed for the 1994 Saab 900, from SCHAEFFLER, TIMKEN, BCA and 3 other brands. SCHAEFFLER SR3506 carries the "Popular" badge.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

21 Crankshaft Seal parts are listed for the 1994 Saab 900, from SCHAEFFLER, TIMKEN, ELRING and 11 other brands. AJUSA 15015300 carries the "Popular" badge.

This table covers the bolts that clamp the cylinder head to the block. Read more

3 Cylinder Head Bolt parts for the 1994 Saab 900 come from 3 brands — AJUSA, ELRING and VICTOR REINZ.

Listed part numbers: AJUSA 81048100, ELRING 803000 and VICTOR REINZ 143210402.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Cylinder Head Gasket parts for the 1994 Saab 900 come from 5 brands — AJUSA, ELRING, FEL-PRO and 2 other brands. The "Popular" part is ELRING 832777.

This group includes ELRING 832777, FEL-PRO 26649PT and AJUSA 10099600 and the remaining parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

5 Cylinder Head Gasket Set parts for the 1994 Saab 900 come from 5 brands — ITM ENGINE COMPONENTS, AJUSA, APEX and 2 other brands. The "Popular" part is ITM ENGINE COMPONENTS 0919119.

Part numbers include ITM ENGINE COMPONENTS 0919119, AJUSA 52136200 and APEX AHS13089, among others listed above.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

This group shows a single part: AJUSA 50193000.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

8 Exhaust Valve parts are listed for the 1994 Saab 900, from SBI, PROFESSIONAL PARTS SWEDEN, MELLING and 3 other brands. MELLING V2040S carries the "Popular" badge.

This group includes MELLING V2040S, SBI 22040S and ENGINETECH EM4353 and the remaining parts above.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

3 Harmonic Balancer parts for the 1994 Saab 900 come from 3 brands — ATP, DAYCO and PIONEER.

Part numbers include ATP 102138, DAYCO PB1472N and PIONEER DA3001.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Intake Manifold Gasket parts for the 1994 Saab 900 come from 4 brands — PROFESSIONAL PARTS SWEDEN, VICTOR REINZ, FEL-PRO and 1 other brand. The "Popular" part is FEL-PRO MS97304.

The Economy section lists 1 option from PROFESSIONAL PARTS SWEDEN — the catalog's value-priced group. PROFESSIONAL PARTS SWEDEN 21342128 is listed in this group.

In the Standard Replacement grade, VICTOR REINZ, FEL-PRO, PROFESSIONAL PARTS SWEDEN and 1 other brand supply 5 parts: built to original-equipment specification. A representative part number is FEL-PRO MS97304.

This group includes FEL-PRO MS97304, PROFESSIONAL PARTS SWEDEN 21342128 and PROFESSIONAL PARTS SWEDEN 21342126 and the remaining parts above.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 1994 Saab 900 — AJUSA 00744700.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

6 Intake Valve parts are listed for the 1994 Saab 900, from ENGINETECH, MELLING, PROFESSIONAL PARTS SWEDEN and 3 other brands. ENGINETECH IM4352 carries the "Popular" badge.

Part numbers include ENGINETECH IM4352, MELLING V5784 and PROFESSIONAL PARTS SWEDEN 23342277, among others listed above.

This table covers the Leak sealants. Read more

This group shows a single part: PROFESSIONAL PARTS SWEDEN 21344946.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

8 Motor Mount parts are listed for the 1994 Saab 900, from PROFESSIONAL PARTS SWEDEN, DEA / MARMON RIDE CONTROL, FAMOUS BRAND and 2 other brands. FAMOUS BRAND 317047 carries the "Popular" badge.

Economy: 5 parts, from PROFESSIONAL PARTS SWEDEN, FAMOUS BRAND and ÜRO PARTS. A representative part number is FAMOUS BRAND 317047.

The Standard Replacement section: 3 options from DEA / MARMON RIDE CONTROL and WESTAR. DEA / MARMON RIDE CONTROL A7082 is listed in this group.

Part numbers include FAMOUS BRAND 317047, ÜRO PARTS 32018013 and PROFESSIONAL PARTS SWEDEN 62347915, among others listed above.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

87 Oil parts are listed for the 1994 Saab 900, from VALVOLINE, LIQUI MOLY, MOBIL and 4 other brands. LIQUI MOLY 20228 carries the "Popular" badge. Conventional, Full Synthetic, Heavy Duty / Diesel, High Mileage (>75,000 Miles), Racing and Synthetic Blend are all represented, and Full Synthetic alone accounts for 52 parts.

This table covers the drain plugs in the oil pan. Read more

6 Oil Drain Plug parts are listed for the 1994 Saab 900, from DORMAN, AGS, ENGINETECH and 1 other brand. DORMAN 090033 carries the "Popular" badge.

Listed part numbers: DORMAN 090033, DORMAN 090053 and AGS ODP00007, plus the other parts above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Drain Plug Gasket parts for the 1994 Saab 900 come from 2 brands — AJUSA and DORMAN.

Part numbers include AJUSA 21012700 and DORMAN 097138.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

22 Oil Filter parts are listed for the 1994 Saab 900, from BOSCH, CHAMP / LUBER-FINER, FAMOUS BRAND and 11 other brands. BOSCH 72132WS carries the "Popular" badge.

Economy: 8 parts, from FAMOUS BRAND, BOSCH, CHAMP / LUBER-FINER and 4 other brands. A representative part number is BOSCH 72132WS.

In the High Performance / Heavy Duty grade, WIX, ACDELCO, FRAM and 1 other brand supply 4 parts: grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. A representative part number is WIX 51040XP.

The Standard Replacement section: 10 options from MAHLE / CLEVITE, ACDELCO, WIX and 6 other brands. ACDELCO PF47E is listed in this group.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Oil Pan Gasket parts are listed for the 1994 Saab 900, from AJUSA, ELRING, FEL-PRO and 1 other brand.

Listed part numbers: AJUSA 14064700, ELRING 164300 and FEL-PRO OS30872C, plus the other parts above.

This table covers the Timing belts. Typical signs include squeal on cold start, cracked ribs, or glazing. Spin the tensioner and idlers by hand while the belt is off. Read more

9 Timing Belt parts for the 1994 Saab 900 come from 9 brands — CLOYES, SKP, ACDELCO and 6 other brands. The "Popular" part is ACDELCO TB285.

The Economy section: 2 options from CLOYES and SKP. CLOYES B285 is listed in this group.

Standard Replacement: 7 parts, from ACDELCO, GATES, BANDO and 4 other brands. A representative part number is ACDELCO TB285.

Part numbers include ACDELCO TB285, CLOYES B285 and SKP SKT285, among others listed above.

This table covers the Timing Belt & component kits. Read more

2 Timing Belt & Component Kit parts are listed for the 1994 Saab 900, from CONTINENTAL and PREFERRED COMPONENTS INC.

Economy: 1 part, from CONTINENTAL. A representative part number is CONTINENTAL GTKWP285A.

The Standard Replacement section: 1 option from PREFERRED COMPONENTS INC. PREFERRED COMPONENTS INC TS26285 is listed in this group.

Part numbers include CONTINENTAL GTKWP285A and PREFERRED COMPONENTS INC TS26285.

This table covers the Timing Belt tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

3 Timing Belt Tensioner parts are listed for the 1994 Saab 900, from ENGINETECH, INA and PREFERRED COMPONENTS INC.

Listed part numbers: ENGINETECH TT341, INA ZD01480S and PREFERRED COMPONENTS INC T66340.

This table covers the wear sleeves used to restore a Timing Cover seal surface. Read more

One part is listed for the 1994 Saab 900 — SKF 99147.

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Timing Cover Seal parts are listed for the 1994 Saab 900, from ITM ENGINE COMPONENTS, SCHAEFFLER and SKF.

This group includes ITM ENGINE COMPONENTS 1509300, SCHAEFFLER SS2515 and SKF 14713.

This table covers the Timing idlers. Typical signs include a chirp that follows engine speed, or an idler that feels rough or has play. Replace a noisy idler with the belt — the labor is already paid for. Read more

4 Timing Idler parts are listed for the 1994 Saab 900, from PROFESSIONAL PARTS SWEDEN, PREFERRED COMPONENTS INC and SKF.

Listed part numbers: PREFERRED COMPONENTS INC T66341, PROFESSIONAL PARTS SWEDEN 21340558 and PROFESSIONAL PARTS SWEDEN 21344114, plus the other parts above.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

10 Valve Cover Gasket parts are listed for the 1994 Saab 900, from VICTOR REINZ, FEL-PRO, MAHLE / CLEVITE and 6 other brands. FEL-PRO VS50566R carries the "Popular" badge.

This table covers the pressed-in bronze and cast-iron guides that align valve stems. Typical signs include oil smoke on startup, a guide that has gone oval, or a valve that no longer seats quietly. Guides are a machine-shop fit. Confirm stem diameter in the notes before ordering. Read more