2013 Toyota Sequoia Ignition Parts

This table covers the sensors that report camshaft position to the ECU. Typical signs include a stall, a no-start, or a code for cam or crank correlation. Check the connector and the reluctor gap before replacing the sensor. Read more

19 Camshaft Position Sensor parts for the 2013 Toyota Sequoia come from 18 brands — STANDARD MOTOR PRODUCTS, ULTRA-POWER, AUTOTECNICA and 15 other brands. The "Popular" part is STANDARD MOTOR PRODUCTS PC559T.

The Economy section lists 8 options from STANDARD MOTOR PRODUCTS, ULTRA-POWER, AUTOTECNICA and 5 other brands — the catalog's value-priced group. STANDARD MOTOR PRODUCTS PC559T is listed in this group.

In the Standard Replacement grade, STANDARD MOTOR PRODUCTS, WALKER PRODUCTS, ASTEMO / HITACHI and 8 other brands supply 11 parts: built to original-equipment specification. A representative part number is STANDARD MOTOR PRODUCTS PC559.

This table covers the sensors that report crankshaft position and engine speed. Typical signs include a stall, a no-start, or a code for cam or crank correlation. Check the connector and the reluctor gap before replacing the sensor. Read more

15 Crankshaft Position Sensor parts for the 2013 Toyota Sequoia come from 15 brands — SPECTRA PREMIUM, DORMAN, HOLSTEIN and 12 other brands. The "Popular" part is SPECTRA PREMIUM S10338.

The Economy section: 7 options from SPECTRA PREMIUM, DORMAN, HOLSTEIN and 4 other brands. SPECTRA PREMIUM S10338 is listed in this group.

Standard Replacement: 8 parts, from DENSO, STANDARD MOTOR PRODUCTS, ASTEMO / HITACHI and 5 other brands. A representative part number is DENSO 1961003.

This table covers the coils that fire each spark plug. Typical signs include a misfire that follows one cylinder, a snap in damp weather, or a coil that is swollen or cracked. Swap a suspect coil with a neighbor to confirm, then replace boots that tore on the way off. Read more

27 Ignition Coil parts for the 2013 Toyota Sequoia come from 21 brands — STANDARD MOTOR PRODUCTS, ULTRA-POWER, WALKER PRODUCTS and 18 other brands. The "Popular" part is ULTRA-POWER 5C1653. Economy, Full Service Kit, Premium and Standard Replacement are all represented, and Standard Replacement alone accounts for 13 parts.

This table covers the lock cylinders in the ignition switch. Read more

2 Ignition Lock Cylinder parts for the 2013 Toyota Sequoia come from 2 brands — STANDARD MOTOR PRODUCTS and WELLS.

Listed part numbers: STANDARD MOTOR PRODUCTS US639L and WELLS 4H1908.

This table covers the spark plugs for this engine. Typical signs include misfire under load, rough idle, or a flashing check-engine light. Verify the gap even on pre-gapped plugs, and replace coil boots that come off a high-mileage engine. Read more

18 Spark Plug parts are listed for the 2013 Toyota Sequoia, from DENSO, NGK, CHAMPION and 4 other brands. NGK 6619 carries the "Popular" badge.

In the Copper / Nickel grade, CHAMPION and DENSO supply 2 parts: grouped under the catalog's "Copper / Nickel" designation — the notes column spells out what sets them apart. A representative part number is CHAMPION 975.

In the Double Platinum (lasts up to 3x longer than Copper / Nickel) grade, BOSCH and CHAMPION supply 2 parts: grouped under the catalog's "Double Platinum (lasts up to 3x longer than Copper / Nickel)" designation — the notes column spells out what sets them apart. A representative part number is BOSCH 8122.

The Iridium (lasts up to 4x longer than Copper / Nickel) section lists 9 options from DENSO, NGK, AUTOLITE and 3 other brands — grouped under the catalog's "Iridium (lasts up to 4x longer than Copper / Nickel)" designation — the notes column spells out what sets them apart. NGK 6619 is listed in this group.

In the Platinum (lasts up to 2x longer than Copper / Nickel) grade, NGK, ACDELCO, BOSCH and 1 other brand supply 4 parts: grouped under the catalog's "Platinum (lasts up to 2x longer than Copper / Nickel)" designation — the notes column spells out what sets them apart. A representative part number is NGK 1483.

In the Ruthenium (maximum durability & ignitability) grade, NGK supplies 1 part: grouped under the catalog's "Ruthenium (maximum durability & ignitability)" designation — the notes column spells out what sets them apart. A representative part number is NGK 94122.

This table covers the silicone and rubber boots that insulate the coil-to-plug spark path. Typical signs include a misfire in the rain, carbon tracking on the boot, or a snap when you pop the coil off. Replace boots as a set on a high-mileage engine; one cracked boot will take the coil with it. Read more

6 Spark Plug / Ignition Coil Boot parts for the 2013 Toyota Sequoia come from 5 brands — STANDARD MOTOR PRODUCTS, WALKER PRODUCTS, DENSO and 2 other brands. The "Popular" part is DENSO 6718184.

The Economy section: 2 options from STANDARD MOTOR PRODUCTS and WALKER PRODUCTS. STANDARD MOTOR PRODUCTS 19461 is listed in this group.

Standard Replacement: 4 parts, from DENSO, NGK, STANDARD MOTOR PRODUCTS and 1 other brand. A representative part number is DENSO 6718184.

Listed part numbers: DENSO 6718184, STANDARD MOTOR PRODUCTS 19461 and WALKER PRODUCTS 900P2096, plus the other parts above.

This table covers the seals at the Spark Plug Tube. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Spark Plug Tube Seal parts for the 2013 Toyota Sequoia come from 5 brands — BECK/ARNLEY, APEX, FEL-PRO and 2 other brands. The "Popular" part is BECK/ARNLEY 0396590.

Part numbers include BECK/ARNLEY 0396590, APEX AES816 and FEL-PRO ES73110, among others listed above.