2014 Toyota Venza Drivetrain Parts

This table covers the actuators that engage four-wheel drive at the transfer case or axle. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

One part is listed for the 2014 Toyota Venza — ACKOJA A701034.

This table covers the seals where an axle shaft exits the housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Axle Shaft Seal parts for the 2014 Toyota Venza come from 2 brands — NATIONAL and WJB / INMOTION PARTS.

This group includes NATIONAL 711097 and WJB / INMOTION PARTS WS711097.

This table covers the complete CV axle shafts from differential (or hub) to wheel. Typical signs include a click in tight turns, grease flung around the wheel well, or a vibration that builds with speed. A torn boot caught early is a boot kit; caught late it is the whole axle. Torque the axle nut to the method in the notes. Read more

18 CV Axle parts for the 2014 Toyota Venza come from 5 brands — GSP, TOP NOTCH, TRAKMOTIVE and 2 other brands. The "Popular" part is APWI TO8377A.

The Economy section lists 1 option from CARDONE — the catalog's value-priced group. CARDONE 605305 is listed in this group.

In the Standard Replacement grade, GSP, TOP NOTCH, TRAKMOTIVE and 2 other brands supply 17 parts: built to original-equipment specification. A representative part number is APWI TO8377A.

This table covers the brackets that mount the CV Axle Support Bearing. Typical signs include a cracked mount, a rattle, or a bracket that no longer holds alignment. Confirm position in the notes. Many brackets look alike and bolt to different corners. Read more

3 CV Axle Support Bearing Bracket parts are listed for the 2014 Toyota Venza, from GSP, TOP NOTCH and TRAKMOTIVE.

Listed part numbers: GSP NB1005, TOP NOTCH TN18279CB and TRAKMOTIVE TO5001.

This table covers the boots that keep grease in a CV joint. Typical signs include a split boot, grease flung around the joint, or a click once grit is inside. A boot caught early is a kit. Once the joint has clicked, the joint itself is usually worn. Read more

4 CV Joint Boot parts for the 2014 Toyota Venza come from 3 brands — BECK/ARNLEY, ACKOJA and MEVOTECH.

Listed part numbers: ACKOJA A709836, BECK/ARNLEY 1033173 and BECK/ARNLEY 1032818, plus the other parts above.

This table covers the bearings and races that support the differential carrier. Read more

6 Differential Carrier Bearing / Race parts for the 2014 Toyota Venza come from 6 brands — WJB / INMOTION PARTS, NATIONAL, SKF and 3 other brands. The "Popular" part is NATIONAL 30210.

The Economy section: 1 option from WJB / INMOTION PARTS. WJB / INMOTION PARTS WT30210 is listed in this group.

Standard Replacement: 5 parts, from NATIONAL, SKF, BCA and 2 other brands. A representative part number is NATIONAL 30210.

Listed part numbers: NATIONAL 30210, WJB / INMOTION PARTS WT30210 and SKF BR30210, plus the other parts above.

This table covers the wear sleeves used to restore a grooved pinion seal surface. Read more

2 Differential Pinion Repair Sleeve parts for the 2014 Toyota Venza come from 2 brands — NATIONAL and WJB / INMOTION PARTS.

This group includes NATIONAL 99210 and WJB / INMOTION PARTS WS99210.

This table covers the seals at the differential pinion yoke. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

6 Differential Pinion Seal parts for the 2014 Toyota Venza come from 4 brands — NATIONAL, WJB / INMOTION PARTS, SKF and 1 other brand. The "Popular" part is NATIONAL 711053.

This group includes NATIONAL 711053, SKF 20776A and NATIONAL 711098 and the remaining parts above.

This table covers the driveshafts that carry torque from the transmission or transfer case. Read more

6 Drive Shaft parts are listed for the 2014 Toyota Venza, from SKP, WJB / INMOTION PARTS, DORMAN and 3 other brands. SKP SK936795 carries the "Popular" badge.

This group includes SKP SK936795, WJB / INMOTION PARTS WDS36795 and DORMAN 936795 and the remaining parts above.

This table covers the Drive Shaft Center Support bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

7 Drive Shaft Center Support Bearing parts are listed for the 2014 Toyota Venza, from DEA / MARMON RIDE CONTROL, WESTAR, PIONEER and 1 other brand. DEA / MARMON RIDE CONTROL A60135 carries the "Popular" badge.

Economy: 4 parts, from DEA / MARMON RIDE CONTROL and WESTAR. A representative part number is DEA / MARMON RIDE CONTROL A60135.

The Standard Replacement section: 3 options from PIONEER and ANCHOR. ANCHOR 6134 is listed in this group.

This group includes DEA / MARMON RIDE CONTROL A60135, DEA / MARMON RIDE CONTROL A60134 and WESTAR DS6541 and the remaining parts above.

This table covers the gear oils specified for the axle or transfer case. Typical signs include a low-oil lamp, knocking, or oil that has gone thin before the next interval. Match the viscosity and spec in the notes, not just the weight on the bottle. Read more

14 Gear Oil parts for the 2014 Toyota Venza come from 3 brands — VALVOLINE, LUCAS OIL and MOBIL. The "Popular" part is MOBIL 104361.

The SAE 75W-90 section lists 7 options from VALVOLINE and MOBIL — grouped under the catalog's "SAE 75W-90" designation — the notes column spells out what sets them apart. MOBIL 104361 is listed in this group.

The SAE 80W-90 section lists 7 options from VALVOLINE and LUCAS OIL — grouped under the catalog's "SAE 80W-90" designation — the notes column spells out what sets them apart. LUCAS OIL 10043 is listed in this group.

This table covers the fluids specified for the transfer case. Typical signs include discolored fluid, a burnt smell, or a level that keeps dropping. Use only the specification in the notes — the tables group grades because they are not interchangeable. Read more

14 Transfer Case Fluid parts for the 2014 Toyota Venza come from 3 brands — VALVOLINE, LUCAS OIL and MOBIL. The "Popular" part is MOBIL 104361.

The SAE 75W-90 section: 7 options from VALVOLINE and MOBIL. MOBIL 104361 is listed in this group.

The SAE 80W-90 section: 7 options from VALVOLINE and LUCAS OIL. LUCAS OIL 10043 is listed in this group.

This table covers the seals at the Transfer Case Housing Extension. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Transfer Case Housing Extension Seal parts are listed for the 2014 Toyota Venza, from BCA, NATIONAL and WJB / INMOTION PARTS.

Part numbers include BCA NS710319, NATIONAL 710319 and WJB / INMOTION PARTS WS710319.

This table covers the seals at the Transfer Case Input Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Transfer Case Input Shaft Seal parts are listed for the 2014 Toyota Venza, from SCHAEFFLER, SKF and WJB / INMOTION PARTS.

Listed part numbers: SCHAEFFLER SS6617, SKF 21680A and WJB / INMOTION PARTS WS21680A.

This table covers the Transfer Case Output Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

One part is listed for the 2014 Toyota Venza — SKF BR3062.

This table covers the seals at the Transfer Case Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Transfer Case Output Shaft Seal parts for the 2014 Toyota Venza come from 4 brands — NATIONAL, SKF, TIMKEN and 1 other brand. The "Popular" part is SKF 14958.

This group includes SKF 14958, NATIONAL 711075 and NATIONAL 710954 and the remaining parts above.