36 Drivetrain parts are listed for the 2016 Toyota Venza, in 10 part types, covering both the 2.7L L4 and the 3.5L V6. Each one has a brand, a manufacturer part number and notes that say where it fits.
On the 2016 Toyota Venza, the drivetrain system moves power from transmission to wheels through axles, CV joints, driveshafts, differentials and wheel-end hardware. 18 parts of the 36 listed are CV Axle (8 parts), Differential Pinion Seal (5 parts) and Drive Shaft Center Support Bearing (5 parts). The other 7 part types cover the remaining 18 parts.
The 2016 Toyota Venza was sold with both the 2.7L L4 and the 3.5L V6. 31 parts fit every engine; the other 5 are engine-specific. Each part shows which engine(s) it fits.
The most listed brands for 2016 Toyota Venza drivetrain parts are NATIONAL (8 parts), WJB / INMOTION PARTS (8 parts) and TRAKMOTIVE (7 parts), plus 10 more brands. Quality grades include Standard Replacement and Economy.
6 parts on this 2016 Toyota Venza page carry a "Popular" badge — the source catalog's flag for options frequently chosen for this vehicle — including TRAKMOTIVE TO8237 (CV Axle) and NATIONAL 711053 (Differential Pinion Seal). Click any part number to see every vehicle that part fits.
Axle Shaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| NATIONAL Fits: all 2016 Venza engines | 711097 | 🇨🇦 CA | RearAWD | View on Amazon |
| WJB / INMOTION PARTS Fits: all 2016 Venza engines | WS711097 | 🇨🇦 CA | RearAWD | View on Amazon |
This table covers the seals where an axle shaft exits the housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
2 Axle Shaft Seal parts for the 2016 Toyota Venza come from 2 brands — NATIONAL and WJB / INMOTION PARTS. Every part fits both the 2.7L L4 and the 3.5L V6.
Listed part numbers: NATIONAL 711097 and WJB / INMOTION PARTS WS711097.
CV Axle
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| TRAKMOTIVE Popular Fits: 2.7L L4 | TO8237 | 🇨🇦 CA | Front RightFWD | View on Amazon |
| TRAKMOTIVE Popular Fits: all 2016 Venza engines | TO8346 | 🇨🇦 CA | Front RightAWD | View on Amazon |
| TRAKMOTIVE Popular Fits: 3.5L V6 | TO8372 | 🇨🇦 CA | Front Left | View on Amazon |
| CARDONE Fits: all 2016 Venza engines | 665381 | 🇨🇦 CA | Rear RightAWD | View on Amazon |
| TRAKMOTIVE Fits: 2.7L L4 | TO8430 | 🇨🇦 CA | AAR Joint Design | View on Amazon |
| TRAKMOTIVE Fits: all 2016 Venza engines | TO8336 | 🇨🇦 CA | Rear RightAWD | View on Amazon |
| TRAKMOTIVE Fits: all 2016 Venza engines | TO8338 | 🇨🇦 CA | Rear LeftAWD | View on Amazon |
| TRAKMOTIVE Fits: 3.5L V6 | TO8371 | 🇨🇦 CA | Front RightFWD | View on Amazon |
This table covers the complete CV axle shafts from differential (or hub) to wheel. Typical signs include a click in tight turns, grease flung around the wheel well, or a vibration that builds with speed. A torn boot caught early is a boot kit; caught late it is the whole axle. Torque the axle nut to the method in the notes.
8 CV Axle parts for the 2016 Toyota Venza come from 2 brands — TRAKMOTIVE and CARDONE. The "Popular" part is TRAKMOTIVE TO8237. 4 parts fit every engine; the other 4 are engine-specific.
Listed part numbers: TRAKMOTIVE TO8237, TRAKMOTIVE TO8346 and TRAKMOTIVE TO8372, plus the other parts above.
CV Axle Support Bearing Bracket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: 2.7L L4 | 926195 | 🇨🇦 CA | RightFWD | View on Amazon |
This table covers the brackets that mount the CV Axle Support Bearing. Typical signs include a cracked mount, a rattle, or a bracket that no longer holds alignment. Confirm position in the notes. Many brackets look alike and bolt to different corners.
One part is listed for the 2016 Toyota Venza — DORMAN 926195.
Differential Carrier Bearing / Race
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WJB / INMOTION PARTS Fits: all 2016 Venza engines | WT30210 | 🇨🇦 CA | Fits LeftToyota trans. | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BCA Fits: all 2016 Venza engines | NB30210 | 🇨🇦 CA | LeftAutomatic trans. | View on Amazon |
| GSP Fits: all 2016 Venza engines | 691210 | 🇨🇦 CA | Rear Left | View on Amazon |
| NATIONAL Fits: all 2016 Venza engines | 30210 | 🇨🇦 CA | LeftToyota trans. | View on Amazon |
This table covers the bearings and races that support the differential carrier.
4 Differential Carrier Bearing / Race parts for the 2016 Toyota Venza come from 4 brands — WJB / INMOTION PARTS, BCA, GSP and 1 other brand. Every part fits both the 2.7L L4 and the 3.5L V6.
The Economy section lists 1 option from WJB / INMOTION PARTS — the catalog's value-priced group. WJB / INMOTION PARTS WT30210 is listed in this group.
In the Standard Replacement grade, BCA, GSP and NATIONAL supply 3 parts: built to original-equipment specification. A representative part number is BCA NB30210.
Part numbers include WJB / INMOTION PARTS WT30210, BCA NB30210 and GSP 691210, among others listed above.
Differential Pinion Repair Sleeve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| NATIONAL Fits: all 2016 Venza engines | 99210 | 🇨🇦 CA | Fits RearAWD | View on Amazon |
| WJB / INMOTION PARTS Fits: all 2016 Venza engines | WS99210 | 🇨🇦 CA | Fits RearAWD | View on Amazon |
This table covers the wear sleeves used to restore a grooved pinion seal surface.
2 Differential Pinion Repair Sleeve parts for the 2016 Toyota Venza come from 2 brands — NATIONAL and WJB / INMOTION PARTS. Every part fits both the 2.7L L4 and the 3.5L V6.
Part numbers include NATIONAL 99210 and WJB / INMOTION PARTS WS99210.
Differential Pinion Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| NATIONAL Popular Fits: all 2016 Venza engines | 711053 | 🇨🇦 CA | Rear Outer | View on Amazon |
| NATIONAL Fits: all 2016 Venza engines | 711098 | 🇨🇦 CA | RearAWD | View on Amazon |
| SCHAEFFLER Fits: all 2016 Venza engines | SS3130 | 🇨🇦 CA | Rear2.85" O.D. X 0.32" Width | View on Amazon |
| WJB / INMOTION PARTS Fits: all 2016 Venza engines | WS711053 | 🇨🇦 CA | Rear Outer | View on Amazon |
| WJB / INMOTION PARTS Fits: all 2016 Venza engines | WS711098 | 🇨🇦 CA | RearAWD | View on Amazon |
This table covers the seals at the differential pinion yoke. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
5 Differential Pinion Seal parts for the 2016 Toyota Venza come from 3 brands — NATIONAL, WJB / INMOTION PARTS and SCHAEFFLER. The "Popular" part is NATIONAL 711053. Every part fits both the 2.7L L4 and the 3.5L V6.
Part numbers include NATIONAL 711053, NATIONAL 711098 and SCHAEFFLER SS3130, among others listed above.
Drive Shaft
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| USA STANDARD GEAR Fits: all 2016 Venza engines | ZDS150489 | 🇨🇦 CA | RearAWD | View on Amazon |
This table covers the driveshafts that carry torque from the transmission or transfer case.
One part is listed for the 2016 Toyota Venza — USA STANDARD GEAR ZDS150489.
Drive Shaft Center Support Bearing
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DEA / MARMON RIDE CONTROL Popular Fits: all 2016 Venza engines | A60135 | 🇨🇦 CA | MRC Driveline | View on Amazon |
| DEA / MARMON RIDE CONTROL Fits: all 2016 Venza engines | A60134 | 🇨🇦 CA | MRC Driveline | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ANCHOR Fits: all 2016 Venza engines | 6134 | 🇨🇦 CA | Frontwith 30mm Inside Diameter Bearing(s) | View on Amazon |
| PIONEER Fits: all 2016 Venza engines | 646134 | 🇨🇦 CA | Front1.1811" Bearing I.D. | View on Amazon |
| PIONEER Fits: all 2016 Venza engines | 646135 | 🇨🇦 CA | Rear1.1811" Bearing I.D. | View on Amazon |
This table covers the Drive Shaft Center Support bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
5 Drive Shaft Center Support Bearing parts are listed for the 2016 Toyota Venza, from DEA / MARMON RIDE CONTROL, PIONEER and ANCHOR. DEA / MARMON RIDE CONTROL A60135 carries the "Popular" badge. All of them fit every engine offered in the 2016 Venza.
Economy: 2 parts, from DEA / MARMON RIDE CONTROL. A representative part number is DEA / MARMON RIDE CONTROL A60135.
The Standard Replacement section: 3 options from PIONEER and ANCHOR. ANCHOR 6134 is listed in this group.
Listed part numbers: DEA / MARMON RIDE CONTROL A60135, DEA / MARMON RIDE CONTROL A60134 and ANCHOR 6134, plus the other parts above.
Transfer Case Housing Extension Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BCA Fits: all 2016 Venza engines | NS710319 | 🇨🇦 CA | AWDwith Aisin MF1A Transfer Case | View on Amazon |
| NATIONAL Fits: all 2016 Venza engines | 710319 | 🇨🇦 CA | AWDwith Aisin MF1A Transfer Case | View on Amazon |
| WJB / INMOTION PARTS Fits: all 2016 Venza engines | WS710319 | 🇨🇦 CA | AWDwith Aisin MF1A Transfer Case | View on Amazon |
This table covers the seals at the Transfer Case Housing Extension. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
3 Transfer Case Housing Extension Seal parts are listed for the 2016 Toyota Venza, from BCA, NATIONAL and WJB / INMOTION PARTS. All of them fit every engine offered in the 2016 Venza.
This group includes BCA NS710319, NATIONAL 710319 and WJB / INMOTION PARTS WS710319.
Transfer Case Output Shaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| NATIONAL Popular Fits: all 2016 Venza engines | 710954 | 🇨🇦 CA | RightAWD | View on Amazon |
| NATIONAL Fits: all 2016 Venza engines | 711075 | 🇨🇦 CA | LeftAWD | View on Amazon |
| TIMKEN Fits: all 2016 Venza engines | SL260373 | 🇨🇦 CA | LeftAWD | View on Amazon |
| WJB / INMOTION PARTS Fits: all 2016 Venza engines | WS710954 | 🇨🇦 CA | RightAWD | View on Amazon |
| WJB / INMOTION PARTS Fits: all 2016 Venza engines | WS711075 | 🇨🇦 CA | LeftAWD | View on Amazon |
This table covers the seals at the Transfer Case Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
5 Transfer Case Output Shaft Seal parts for the 2016 Toyota Venza come from 3 brands — NATIONAL, WJB / INMOTION PARTS and TIMKEN. The "Popular" part is NATIONAL 710954. Every part fits both the 2.7L L4 and the 3.5L V6.
Part numbers include NATIONAL 710954, NATIONAL 711075 and TIMKEN SL260373, among others listed above.
Buying Drivetrain Parts for a 2016 Toyota Venza
On this vehicle, the drivetrain system moves power from transmission to wheels through axles, CV joints, driveshafts, differentials and wheel-end hardware.
- Match the engine first. Some drivetrain parts fit every engine; others are engine-specific. Each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the differential or transfer-case fluid with any axle or seal job while everything is already open.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: CV Axle and Differential Pinion Seal .
Frequently Asked Questions
How many drivetrain parts fit the 2016 Toyota Venza?
Our catalog currently lists 36 drivetrain parts for the 2016 Toyota Venza across 10 subcategories and 13 brands, covering both the 2.7L L4 and the 3.5L V6. Each part is matched to the engine(s) it fits.
Do drivetrain parts differ between 2016 Toyota Venza engines?
Some do. 31 parts fit every engine; the other 5 are engine-specific. Each row (and the filter at the top) shows which. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of drivetrain problems on a 2016 Toyota Venza?
Common symptoms include clicking in tight turns, a clunk when shifting between drive and reverse, vibration that builds with speed, or gear oil on the inside of a wheel. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the differential or transfer-case fluid with any axle or seal job while everything is already open.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2016 Toyota Venza was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2016 Toyota Venza?
First match the engine — each row shows which engine(s) the part fits. Then a torn CV boot caught early is a cheap boot kit; caught late it is a whole axle — inspect before deciding which to buy. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2016 Toyota Venza
Drivetrain Parts for Other Toyota Venza Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.