2016 Toyota 4RUNNER Drivetrain Parts

This table covers the actuators that engage four-wheel drive at the transfer case or axle. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

6 4WD Actuator parts are listed for the 2016 Toyota 4RUNNER, from STANDARD MOTOR PRODUCTS, WELLS, AISIN and 2 other brands. STANDARD MOTOR PRODUCTS TCA103 carries the "Popular" badge.

Listed part numbers: STANDARD MOTOR PRODUCTS TCA103, WELLS 1S15513 and AISIN SAT017, plus the other parts above.

This table covers the Axle shafts. Read more

One part is listed for the 2016 Toyota 4RUNNER — DORMAN 926137.

This table covers the Axle Shaft bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

3 Axle Shaft Bearing parts are listed for the 2016 Toyota 4RUNNER, from NSK, SKF and USA STANDARD GEAR.

This group includes NSK B432CG65, SKF BR4317 and USA STANDARD GEAR USA18194.

This table covers the Axle Shaft Lock / Snap rings. Read more

One part is listed for the 2016 Toyota 4RUNNER — SKF R271.

This table covers the seals where an axle shaft exits the housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

14 Axle Shaft Seal parts for the 2016 Toyota 4RUNNER come from 7 brands — SKF, TIMKEN, NATIONAL and 4 other brands. The "Popular" part is NATIONAL 710596.

This table covers the complete CV axle shafts from differential (or hub) to wheel. Typical signs include a click in tight turns, grease flung around the wheel well, or a vibration that builds with speed. A torn boot caught early is a boot kit; caught late it is the whole axle. Torque the axle nut to the method in the notes. Read more

8 CV Axle parts for the 2016 Toyota 4RUNNER come from 4 brands — TOP NOTCH, GSP, TRAKMOTIVE and 1 other brand. The "Popular" part is GSP NCV69170.

The Economy section lists 1 option from CARDONE — the catalog's value-priced group. CARDONE 605235 is listed in this group.

In the Heavy Duty grade, GSP, TOP NOTCH and TRAKMOTIVE supply 3 parts: rated for severe service. A representative part number is GSP NCV69170XD.

In the Specialty - For Lifted Vehicles grade, TOP NOTCH supplies 1 part: grouped under the catalog's "Specialty - For Lifted Vehicles" designation — the notes column spells out what sets them apart. A representative part number is TOP NOTCH TN18033XDP.

In the Standard Replacement grade, GSP, TRAKMOTIVE and TOP NOTCH supply 3 parts: built to original-equipment specification. A representative part number is GSP NCV69170.

This group includes GSP NCV69170, CARDONE 605235 and GSP NCV69170XD and the remaining parts above.

This table covers the CV Intermediate shafts. Read more

One part is listed for the 2016 Toyota 4RUNNER — TRAKMOTIVE TO3513.

This table covers the boots that keep grease in a CV joint. Typical signs include a split boot, grease flung around the joint, or a click once grit is inside. A boot caught early is a kit. Once the joint has clicked, the joint itself is usually worn. Read more

4 CV Joint Boot parts for the 2016 Toyota 4RUNNER come from 2 brands — BECK/ARNLEY and MEVOTECH.

Part numbers include BECK/ARNLEY 1033133, BECK/ARNLEY 1033040 and BECK/ARNLEY 1033124, among others listed above.

This table covers the bearings and races that support the differential carrier. Read more

This group shows a single part: SKF BR5083.

This table covers the Differential Carrier shims. Read more

One part is listed for the 2016 Toyota 4RUNNER — MOTIVE GEAR SK47.

This table covers the Differential Crush sleeves. Read more

3 Differential Crush Sleeve parts are listed for the 2016 Toyota 4RUNNER, from USA STANDARD GEAR and SKF.

Part numbers include SKF KRS155, USA STANDARD GEAR USA55053 and USA STANDARD GEAR USA33573.

This table covers the Differential Gear Installation kits. Read more

One part is listed for the 2016 Toyota 4RUNNER — USA STANDARD GEAR USA12091.

This table covers the Differential Lock actuators. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

2 Differential Lock Actuator parts for the 2016 Toyota 4RUNNER come from 2 brands — AISIN and SKP.

Listed part numbers: AISIN SAT020 and SKP SKSAT008.

This table covers the bearings and races on the differential pinion. Read more

9 Differential Pinion Bearing / Race parts are listed for the 2016 Toyota 4RUNNER, from TIMKEN, BCA, SKF and 2 other brands. TIMKEN SET720 carries the "Popular" badge.

This group includes TIMKEN SET720, TIMKEN 35028 and BCA NB30025 and the remaining parts above.

This table covers the seals at the differential pinion yoke. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

7 Differential Pinion Seal parts for the 2016 Toyota 4RUNNER come from 5 brands — NATIONAL, WJB / INMOTION PARTS, BCA and 2 other brands. The "Popular" part is NATIONAL 710697.

Part numbers include NATIONAL 710697, WJB / INMOTION PARTS WS710697 and BCA NS710697, among others listed above.

This table covers the Differential Pinion shims. Read more

This group shows a single part: MOTIVE GEAR 1109.

This table covers kits that group the bearings, races and seals for a differential rebuild. Read more

17 Differential Rebuild Kit parts are listed for the 2016 Toyota 4RUNNER, from USA STANDARD GEAR, BCA, SKF and 2 other brands. MOTIVE GEAR R11RTACFLMK carries the "Popular" badge.

In the Master Kit grade, USA STANDARD GEAR, BCA, MOTIVE GEAR and 1 other brand supply 8 parts: grouped under the catalog's "Master Kit" designation — the notes column spells out what sets them apart. A representative part number is MOTIVE GEAR R11RTACFLMK.

The Standard Kit section lists 9 options from USA STANDARD GEAR, BCA and SKF — grouped under the catalog's "Standard Kit" designation — the notes column spells out what sets them apart. BCA NBDRK383 is listed in this group.

This table covers the ring-and-pinion gear sets that set the axle ratio. Read more

5 Differential Ring and Pinion parts for the 2016 Toyota 4RUNNER come from 3 brands — MOTIVE GEAR, RICHMOND and USA STANDARD GEAR.

The Economy section: 1 option from RICHMOND. RICHMOND T82 is listed in this group.

Standard Replacement: 4 parts, from MOTIVE GEAR and USA STANDARD GEAR. A representative part number is MOTIVE GEAR TACIFSL.

Part numbers include RICHMOND T82 and MOTIVE GEAR TACIFSL, among others listed above.

This table covers the Differential Ring Gear bolts. Read more

2 Differential Ring Gear Bolt parts for the 2016 Toyota 4RUNNER come from 2 brands — MOTIVE GEAR and USA STANDARD GEAR.

Part numbers include MOTIVE GEAR RGB19 and USA STANDARD GEAR USA33580.

This table covers the driveshafts that carry torque from the transmission or transfer case. Read more

13 Drive Shaft parts are listed for the 2016 Toyota 4RUNNER, from CARDONE, TOP NOTCH, DORMAN and 2 other brands. SKP SK938001 carries the "Popular" badge.

This table covers the gear oils specified for the axle or transfer case. Typical signs include a low-oil lamp, knocking, or oil that has gone thin before the next interval. Match the viscosity and spec in the notes, not just the weight on the bottle. Read more

3 Gear Oil parts for the 2016 Toyota 4RUNNER come from 2 brands — VALVOLINE and IDEMITSU.

Part numbers include IDEMITSU 30305024750, VALVOLINE 915052 and VALVOLINE 915053.

This table covers the Gear Oil additives. Read more

This group shows a single part: USA STANDARD GEAR USA15018.

This table covers the seals at the Transfer Case Companion Flange. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Transfer Case Companion Flange Seal parts for the 2016 Toyota 4RUNNER come from 4 brands — NATIONAL, SCHAEFFLER, SKF and 1 other brand.

Part numbers include NATIONAL 710254, SCHAEFFLER SS3989 and SKF 9005, among others listed above.

This table covers the seals at the Transfer Case Housing Extension. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Transfer Case Housing Extension Seal parts are listed for the 2016 Toyota 4RUNNER, from NATIONAL, BCA, SCHAEFFLER and 2 other brands. NATIONAL 710141 carries the "Popular" badge.

Part numbers include NATIONAL 710141, BCA NS710141 and SCHAEFFLER SS2703, among others listed above.

This table covers the seals at the Transfer Case Input Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Transfer Case Input Shaft Seal parts are listed for the 2016 Toyota 4RUNNER, from BCA, NATIONAL, SKF and 1 other brand.

Part numbers include BCA NS710159, NATIONAL 710159 and SKF 17300, among others listed above.

This table covers the Transfer Case motors. Typical signs include no motion, a squeal, or a motor that only runs on one speed. Confirm power, ground and the control module before replacing the motor. Read more

6 Transfer Case Motor parts are listed for the 2016 Toyota 4RUNNER, from DORMAN, STANDARD MOTOR PRODUCTS, ACKOJA and 3 other brands. DORMAN 600493 carries the "Popular" badge.

Part numbers include DORMAN 600493, STANDARD MOTOR PRODUCTS TCM117 and ACKOJA A70860001, among others listed above.

This table covers the seals at the Transfer Case Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Transfer Case Output Shaft Seal parts for the 2016 Toyota 4RUNNER come from 4 brands — BCA, NATIONAL, SCHAEFFLER and 1 other brand.

This group includes BCA NS710114, NATIONAL 710114 and SCHAEFFLER SS2668 and the remaining parts above.

This table covers the forks that move a transfer-case shift collar. Read more

This group shows a single part: DORMAN 600565.

This table covers the seals at the Transfer Case Shift Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Transfer Case Shift Shaft Seal parts are listed for the 2016 Toyota 4RUNNER, from NATIONAL, SCHAEFFLER and WJB / INMOTION PARTS.

This group includes NATIONAL 221510, SCHAEFFLER SS2123 and WJB / INMOTION PARTS WS221510.

This table covers the U-joints in the driveshaft. Read more

16 Universal Joint parts for the 2016 Toyota 4RUNNER come from 8 brands — SKF, MOOG, DANA and 5 other brands. The "Popular" part is SKF UJ285.

The Economy section: 3 options from WJB / INMOTION PARTS and DANA. DANA 251510X is listed in this group.

Heavy Duty: 6 parts, from SKF, MOOG, FVP and 1 other brand. A representative part number is SKF UJ285.

Standard Replacement: 7 parts, from GKN, DANA, MOOG and 3 other brands. A representative part number is DANA 51510X.