2018 Toyota 86 Engine Parts

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

3 Connecting Rod Bearing parts for the 2018 Toyota 86 come from 3 brands — KING ENGINE BEARINGS, ENGINETECH and TOPLINE.

The High Performance section lists 1 option from KING ENGINE BEARINGS — engineered beyond original-equipment specification. KING ENGINE BEARINGS CR4616XPGC is listed in this group.

In the Standard Replacement grade, ENGINETECH and TOPLINE supply 2 parts: built to original-equipment specification. A representative part number is ENGINETECH BB1310.

This group includes KING ENGINE BEARINGS CR4616XPGC, ENGINETECH BB1310 and TOPLINE RBSU16L.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Conversion / Lower Gasket Set parts for the 2018 Toyota 86 come from 3 brands — AJUSA, APEX and FEL-PRO.

Listed part numbers: AJUSA 54185400, APEX ACS6026 and FEL-PRO CS26524.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

6 Crankshaft Main Bearing parts are listed for the 2018 Toyota 86, from KING ENGINE BEARINGS and TOPLINE. KING ENGINE BEARINGS MB5745SI carries the "Popular" badge.

High Performance: 4 parts, from KING ENGINE BEARINGS. A representative part number is KING ENGINE BEARINGS MB5745XPG.

The Standard Replacement section: 2 options from KING ENGINE BEARINGS and TOPLINE. KING ENGINE BEARINGS MB5745SI is listed in this group.

This group includes KING ENGINE BEARINGS MB5745SI, KING ENGINE BEARINGS MB5745XPG and KING ENGINE BEARINGS MB5745XPGC and the remaining parts above.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

3 Crankshaft Repair Sleeve parts are listed for the 2018 Toyota 86, from BCA, NATIONAL and WJB / INMOTION PARTS.

Part numbers include BCA NS99196, NATIONAL 99196 and WJB / INMOTION PARTS WS99196.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

13 Crankshaft Seal parts are listed for the 2018 Toyota 86, from FEL-PRO, NATIONAL, AJUSA and 5 other brands. FEL-PRO TCS46181 carries the "Popular" badge.

This table covers the bolts that clamp the cylinder head to the block. Read more

4 Cylinder Head Bolt parts for the 2018 Toyota 86 come from 4 brands — APEX, ENGINETECH, FEL-PRO and 1 other brand.

This group includes APEX AHB609, ENGINETECH HB204 and FEL-PRO ES72905 and the remaining parts above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

8 Cylinder Head Gasket parts for the 2018 Toyota 86 come from 3 brands — AJUSA, APEX and ELRING. The "Popular" part is APEX AHG627L.

Listed part numbers: APEX AHG627L, APEX AHG627R and AJUSA 10202200, plus the other parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

This group shows a single part: AJUSA 52357700.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Engine Kit Gasket Set parts for the 2018 Toyota 86 come from 2 brands — AJUSA and ELRING.

This group includes AJUSA 50323200 and ELRING 778950.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

This group shows a single part: DAYCO PB1792N.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Intake Manifold Gasket parts for the 2018 Toyota 86 come from 3 brands — AJUSA, BECK/ARNLEY and ELRING.

Listed part numbers: AJUSA 13244700, BECK/ARNLEY 0376248 and ELRING 694040.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

6 Motor Mount parts are listed for the 2018 Toyota 86, from ANCHOR, DEA / MARMON RIDE CONTROL and PIONEER. ANCHOR 9832 carries the "Popular" badge.

Part numbers include ANCHOR 9832, DEA / MARMON RIDE CONTROL A6786 and ANCHOR 9834, among others listed above.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

35 Oil parts are listed for the 2018 Toyota 86, from VALVOLINE, LIQUI MOLY, MOBIL and 3 other brands. LIQUI MOLY 22044 carries the "Popular" badge. Grades run from Full Synthetic through Racing; Full Synthetic is the most populated section, led by LIQUI MOLY, VALVOLINE, IDEMITSU and 3 other brands.

This table covers the drain plugs in the oil pan. Read more

5 Oil Drain Plug parts are listed for the 2018 Toyota 86, from ELRING, DORMAN, ENGINETECH and 1 other brand. DORMAN 090054 carries the "Popular" badge.

This group includes DORMAN 090054, ELRING 057420 and ELRING 107980 and the remaining parts above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Oil Drain Plug Gasket parts for the 2018 Toyota 86 come from 6 brands — ELRING, ULTRA-POWER, AJUSA and 3 other brands. The "Popular" part is ELRING 705070.

This group includes ELRING 705070, ULTRA-POWER 095159 and AJUSA 17000700 and the remaining parts above.

This table covers the caps on the oil filler neck. Read more

One part is listed for the 2018 Toyota 86 — MOTORAD MO200.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

13 Oil Filter parts are listed for the 2018 Toyota 86, from BOSCH, VARIOUS MFR, FRAM and 8 other brands. MOBIL M1104A carries the "Popular" badge.

In the Economy grade, BOSCH, FRAM, PRO-TEC and 1 other brand supply 4 parts: the catalog's value-priced group. A representative part number is BOSCH 72228WS.

In the High Performance / Heavy Duty grade, MOBIL supplies 1 part: grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. A representative part number is MOBIL M1104A.

The Standard Replacement section: 8 options from BOSCH, DENSO, ACDELCO and 5 other brands. BOSCH 3312 is listed in this group.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Oil Pan Gasket parts are listed for the 2018 Toyota 86, from VICTOR REINZ, AJUSA, APEX and 2 other brands. VICTOR REINZ 703141410 carries the "Popular" badge.

This group includes VICTOR REINZ 703141410, AJUSA 59020200 and APEX AOP626 and the remaining parts above.

This table covers the Piston Pin bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

2 Piston Pin Bushing parts are listed for the 2018 Toyota 86, from ENGINETECH and TOPLINE.

Listed part numbers: ENGINETECH EB0294 and TOPLINE PBSU16F.

This table covers the rings that seal each piston to the cylinder wall. Read more

This group shows a single part: ITM ENGINE COMPONENTS 0219288.

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Timing Cover Seal parts are listed for the 2018 Toyota 86, from SKF and WJB / INMOTION PARTS.

Listed part numbers: SKF 19673A and WJB / INMOTION PARTS WS19673A.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

11 Valve Cover Gasket parts are listed for the 2018 Toyota 86, from BECK/ARNLEY, MAHLE / CLEVITE, AJUSA and 2 other brands. BECK/ARNLEY 0362063 carries the "Popular" badge.

This table covers the pressed-in bronze and cast-iron guides that align valve stems. Typical signs include oil smoke on startup, a guide that has gone oval, or a valve that no longer seats quietly. Guides are a machine-shop fit. Confirm stem diameter in the notes before ordering. Read more

4 Valve Guide parts are listed for the 2018 Toyota 86, from ENGINETECH and TOPLINE.

Listed part numbers: ENGINETECH GD3216, ENGINETECH GD3215 and TOPLINE IVGSU16F, plus the other parts above.

This table covers the lifters / tappets that transfer cam motion to the valves. Read more

2 Valve Lifter parts are listed for the 2018 Toyota 86, from ENGINETECH and TOPLINE.

This group includes ENGINETECH L2498 and TOPLINE LIFSU16.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

6 Valve Stem Seal parts are listed for the 2018 Toyota 86, from ELRING, APEX, FEL-PRO and 2 other brands. APEX AVS6026 carries the "Popular" badge.

Listed part numbers: APEX AVS6026, FEL-PRO SS729331 and AJUSA 57066200, plus the other parts above.

This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

One part is listed for the 2018 Toyota 86 — WELLS 2T1295.

This table covers the cam phaser sprockets used by the variable-valve-timing system. Read more

5 Variable Valve Timing (VVT) Sprocket parts are listed for the 2018 Toyota 86, from STANDARD MOTOR PRODUCTS and WELLS. STANDARD MOTOR PRODUCTS VVT684 carries the "Popular" badge.

Part numbers include STANDARD MOTOR PRODUCTS VVT684, STANDARD MOTOR PRODUCTS VVT678 and STANDARD MOTOR PRODUCTS VVT680, among others listed above.