28 Ignition parts are listed for the 2018 Toyota 86, in 5 part types, covering the 2.0L H4 engine. Each one has a brand, a manufacturer part number and notes that say where it fits.
The ignition system on the 2018 Toyota 86 delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules. The largest groups are Ignition Coil (12 parts), Camshaft Position Sensor (9 parts) and Crankshaft Position Sensor (4 parts). The other 2 part types cover the remaining 3 parts.
The 2018 Toyota 86 came with a single engine, the 2.0L H4, and every part is verified against it.
12 brands supply ignition parts for the 2018 Toyota 86, led by STANDARD MOTOR PRODUCTS (6 parts), HOLSTEIN (4 parts) and BECK/ARNLEY (4 parts), plus 9 more brands. Quality grades include Standard Replacement and Economy.
A "Popular" badge means the source catalog flagged the part as frequently chosen for the 2018 Toyota 86. 5 parts have it, including HOLSTEIN 2CAM0286 (Camshaft Position Sensor) and SKP SKUF747 (Ignition Coil). Each part number opens a page with every vehicle that part fits.
Camshaft Position Sensor
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| HOLSTEIN Popular | 2CAM0286 | 🇺🇸 US 🇨🇦 CA | Exhaust (Right) | View on Amazon |
| HOLSTEIN | 2CAM0658 | 🇺🇸 US 🇨🇦 CA | Fits Intak | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Popular | PC969 | 🇺🇸 US 🇨🇦 CA | Connector Shape: Oval | View on Amazon |
| BECK/ARNLEY | 1800614 | 🇺🇸 US 🇨🇦 CA | Exhaust (Right) | View on Amazon |
| BECK/ARNLEY | 1800800 | 🇺🇸 US 🇨🇦 CA | Fits Intake (Right) | View on Amazon |
| DELPHI | SS11930 | 🇺🇸 US 🇨🇦 CA | Exhaust (Right) | View on Amazon |
| WALKER PRODUCTS | 2352292 | 🇺🇸 US 🇨🇦 CA | Sensor Only | View on Amazon |
| WALKER PRODUCTS | 2351795 | 🇺🇸 US 🇨🇦 CA | Sensor Only | View on Amazon |
| WELLS | 5S11490 | 🇺🇸 US 🇨🇦 CA | Mounting Bracket Included: No | View on Amazon |
This table covers the sensors that report camshaft position to the ECU. Typical signs include a stall, a no-start, or a code for cam or crank correlation. Check the connector and the reluctor gap before replacing the sensor.
9 Camshaft Position Sensor parts for the 2018 Toyota 86 come from 6 brands — HOLSTEIN, BECK/ARNLEY, WALKER PRODUCTS and 3 other brands. The "Popular" part is HOLSTEIN 2CAM0286.
The Economy section lists 2 options from HOLSTEIN — the catalog's value-priced group. HOLSTEIN 2CAM0286 is listed in this group.
In the Standard Replacement grade, BECK/ARNLEY, WALKER PRODUCTS, STANDARD MOTOR PRODUCTS and 2 other brands supply 7 parts: built to original-equipment specification. A representative part number is STANDARD MOTOR PRODUCTS PC969.
This group includes HOLSTEIN 2CAM0286, HOLSTEIN 2CAM0658 and STANDARD MOTOR PRODUCTS PC969 and the remaining parts above.
Crankshaft Position Sensor
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| HOLSTEIN | 2CRK0549 | 🇺🇸 US 🇨🇦 CA | Body code ZN6 | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS | PC1053 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| WALKER PRODUCTS | 2352291 | 🇺🇸 US 🇨🇦 CA | Sensor Only | View on Amazon |
| WELLS | 5S16183 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the sensors that report crankshaft position and engine speed. Typical signs include a stall, a no-start, or a code for cam or crank correlation. Check the connector and the reluctor gap before replacing the sensor.
4 Crankshaft Position Sensor parts for the 2018 Toyota 86 come from 4 brands — HOLSTEIN, STANDARD MOTOR PRODUCTS, WALKER PRODUCTS and 1 other brand.
The Economy section: 1 option from HOLSTEIN. HOLSTEIN 2CRK0549 is listed in this group.
Standard Replacement: 3 parts, from STANDARD MOTOR PRODUCTS, WALKER PRODUCTS and WELLS. A representative part number is STANDARD MOTOR PRODUCTS PC1053.
Listed part numbers: HOLSTEIN 2CRK0549, STANDARD MOTOR PRODUCTS PC1053 and WALKER PRODUCTS 2352291, plus the other parts above.
Ignition Coil
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SKP Popular | SKUF747 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| ULTRA-POWER Popular | UF775 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| BWD/NIEHOFF | E1275 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| PRENCO | 368293 | 🇺🇸 US 🇨🇦 CA | Includes 36-2130 Boot Kit | View on Amazon |
| SPECTRA PREMIUM | C947 | 🇺🇸 US 🇨🇦 CA | Ignition Coil Mounts to Cylinder Head | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Popular | UF747 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| BECK/ARNLEY | 1788562 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| STANDARD MOTOR PRODUCTS | UF775 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| UNITED MOTOR PRODUCTS | COP645 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| WALKER PRODUCTS | 9212306 | 🇺🇸 US 🇨🇦 CA | Single Coil | View on Amazon |
| WELLS | 5C2108 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| HOLSTEIN | 2IGC0541 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the coils that fire each spark plug. Typical signs include a misfire that follows one cylinder, a snap in damp weather, or a coil that is swollen or cracked. Swap a suspect coil with a neighbor to confirm, then replace boots that tore on the way off.
12 Ignition Coil parts for the 2018 Toyota 86 come from 11 brands — STANDARD MOTOR PRODUCTS, SKP, ULTRA-POWER and 8 other brands. The "Popular" part is SKP SKUF747.
The Economy section: 5 options from SKP, ULTRA-POWER, BWD/NIEHOFF and 2 other brands. SKP SKUF747 is listed in this group.
Standard Replacement: 6 parts, from STANDARD MOTOR PRODUCTS, BECK/ARNLEY, UNITED MOTOR PRODUCTS and 2 other brands. A representative part number is STANDARD MOTOR PRODUCTS UF747.
1 further part sits outside the graded sections, with the same engine-level match.
Spark Plug / Ignition Coil Boot
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS | 19981 | 🇺🇸 US 🇨🇦 CA | Federal Wire | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS | SPP208E | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the silicone and rubber boots that insulate the coil-to-plug spark path. Typical signs include a misfire in the rain, carbon tracking on the boot, or a snap when you pop the coil off. Replace boots as a set on a high-mileage engine; one cracked boot will take the coil with it.
2 Spark Plug / Ignition Coil Boot parts for the 2018 Toyota 86 come from STANDARD MOTOR PRODUCTS.
The Economy section: 1 option from STANDARD MOTOR PRODUCTS. STANDARD MOTOR PRODUCTS 19981 is listed in this group.
Standard Replacement: 1 part, from STANDARD MOTOR PRODUCTS. A representative part number is STANDARD MOTOR PRODUCTS SPP208E.
Part numbers include STANDARD MOTOR PRODUCTS 19981 and STANDARD MOTOR PRODUCTS SPP208E.
Spark Plug Tube Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BECK/ARNLEY | 0396670 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the seals at the Spark Plug Tube. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
This group shows a single part: BECK/ARNLEY 0396670.
Buying Ignition Parts for a 2018 Toyota 86
On this vehicle, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules.
- Confirm you have the 2.0L H4 engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Ignition Coil and Camshaft Position Sensor .
Frequently Asked Questions
How many ignition parts fit the 2018 Toyota 86?
Our catalog currently lists 28 ignition parts for the 2018 Toyota 86 across 5 subcategories and 12 brands, covering the 2.0L H4 engine. Each part is matched to the engine(s) it fits.
What are the signs of ignition problems on a 2018 Toyota 86?
Common symptoms include misfires under load, rough idle, flashing check-engine light, or poor starting in damp weather. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2018 Toyota 86 was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2018 Toyota 86?
Every part on this page is matched to the 2.0L H4 engine. Then gap matters even on “pre-gapped” plugs — verify against spec, and replace coil boots when they come off a high-mileage engine. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2018 Toyota 86
Ignition Parts for Other Toyota 86 Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.