2018 Toyota C-HR Electrical Parts

This table covers the alternators that charge the battery and run the electrical load. Typical signs include dim lights at idle, a battery lamp, or a growl from the charging pulley. Load-test the battery and inspect the belt and grounds — a bad ground mimics a failed alternator. Read more

5 Alternator / Generator parts are listed for the 2018 Toyota C-HR, from TYC, FVP, PURE ENERGY and 2 other brands. TYC 211879 carries the "Popular" badge.

In the New grade, TYC supplies 1 part: brand-new units rather than rebuilt ones. A representative part number is TYC 211879.

In the Remanufactured grade, FVP, PURE ENERGY, REMY and 1 other brand supply 4 parts: factory-rebuilt units with new wear components. A representative part number is FVP 14078.

Listed part numbers: TYC 211879 and FVP 14078, plus the other parts above.

This table covers the pulleys on the alternator shaft. Typical signs include a growl or chirp that follows engine speed, or a pulley that will not spin freely by hand. Spin each pulley with the belt off. Roughness or play means replace it with the belt. Read more

3 Alternator / Generator Pulley parts for the 2018 Toyota C-HR come from 3 brands — CONTINENTAL, LITENS and WELLS.

Part numbers include CONTINENTAL 49963, LITENS 920055A and WELLS 2D5005.

This table covers the batteries listed by group size and specification. Typical signs include slow cranking, a battery lamp, or a no-start after the vehicle sat overnight. Confirm group size and terminal layout in the notes. Clean the posts and the ground before condemning the battery. Read more

6 Battery parts for the 2018 Toyota C-HR come from 6 brands — DEKA, FVP, EXIDE and 3 other brands. The "Popular" part is DEKA 9A47.

In the AGM (Extended Life) grade, DEKA, FVP, EXIDE and 2 other brands supply 5 parts: grouped under the catalog's "AGM (Extended Life)" designation — the notes column spells out what sets them apart. A representative part number is DEKA 9A47.

In the Performance AGM (Extended Life + Increased Power) grade, FULLRIVER supplies 1 part: grouped under the catalog's "Performance AGM (Extended Life + Increased Power)" designation — the notes column spells out what sets them apart. A representative part number is FULLRIVER FT61047.

Part numbers include DEKA 9A47, FVP P47AGM and EXIDE MXH5L247, among others listed above.

This table covers the terminals and clamps that connect cables to the battery posts. Read more

3 Battery Terminal parts for the 2018 Toyota C-HR come from 3 brands — AUTOTECNICA, BECK/ARNLEY and DORMAN.

Listed part numbers: AUTOTECNICA TY1318200, BECK/ARNLEY 2060002 and DORMAN 926516.

This table covers the Blind Spot Detection sensors. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors. Read more

One part is listed for the 2018 Toyota C-HR — WELLS 5S16568.

This table covers the resettable circuit breakers in this vehicle's electrical system. Read more

2 Circuit Breaker parts for the 2018 Toyota C-HR come from 2 brands — STANDARD MOTOR PRODUCTS and WELLS.

This group includes STANDARD MOTOR PRODUCTS FH54 and WELLS 3C1211.

This table covers the Cruise Control Distance sensors. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors. Read more

3 Cruise Control Distance Sensor parts for the 2018 Toyota C-HR come from 3 brands — DORMAN, STANDARD MOTOR PRODUCTS and WELLS.

Listed part numbers: DORMAN 601795, STANDARD MOTOR PRODUCTS CCD42 and WELLS 5S17189.

This table covers the brackets that mount the Parking Aid Sensor. Typical signs include a cracked mount, a rattle, or a bracket that no longer holds alignment. Confirm position in the notes. Many brackets look alike and bolt to different corners. Read more

One part is listed for the 2018 Toyota C-HR — TECHPRO TO1074101.

This table covers the Side Object Sensor modules. Typical signs include a cluster of unrelated faults, a no-communication code, or a module that will not sleep. Confirm power, ground and programming compatibility in the notes. Modules are rarely plug-and-play across years. Read more

One part is listed for the 2018 Toyota C-HR — DORMAN 601496.

This table covers the speed sensors on the transmission, transfer case or ABS ring. Typical signs include a dead speedometer, harsh transmission shifts, or a code for vehicle speed. Inspect the tone wheel and the connector before replacing the sensor. Read more

10 Speed Sensor parts for the 2018 Toyota C-HR come from 6 brands — BECK/ARNLEY, STANDARD MOTOR PRODUCTS, AISIN and 3 other brands. The "Popular" part is ULTRA-POWER SC658.

The Economy section lists 5 options from BECK/ARNLEY, ULTRA-POWER and HOLSTEIN — the catalog's value-priced group. ULTRA-POWER SC658 is listed in this group.

In the Standard Replacement grade, STANDARD MOTOR PRODUCTS, AISIN and DELPHI supply 5 parts: built to original-equipment specification. A representative part number is STANDARD MOTOR PRODUCTS SC658.

This table covers the starter motors that crank the engine. Typical signs include no motion, a squeal, or a motor that only runs on one speed. Confirm power, ground and the control module before replacing the motor. Read more

4 Starter Motor parts are listed for the 2018 Toyota C-HR, from FVP, PURE ENERGY, REMY and 1 other brand.

This group includes FVP 18270 and REMY 16340 and the remaining parts above.