2018 Toyota Highlander Interior Parts

This table covers the Accelerator Pedal position sensors. Typical signs include a stall, a no-start, or a code for cam or crank correlation. Check the connector and the reluctor gap before replacing the sensor. Read more

2 Accelerator Pedal Position Sensor parts are listed for the 2018 Toyota Highlander, from STANDARD MOTOR PRODUCTS and WELLS. All of them fit every engine offered in the 2018 Highlander.

Part numbers include STANDARD MOTOR PRODUCTS APS596 and WELLS 5S14621.

This table covers the Cargo Area mats. Read more

This group shows a single part: 3D M1TY163130.

This table covers the dash covers that sit over the instrument panel. Read more

6 Dash Board Cover parts for the 2018 Toyota Highlander come from DASH DESIGNS. The "Popular" part is DASH DESIGNS 29800C. Every part fits all 3 engine options (2.7L L4, 3.5L V6 and 3.5L V6 ELECTRIC/GAS).

In the Carpet grade, DASH DESIGNS supplies 1 part: grouped under the catalog's "Carpet" designation — the notes column spells out what sets them apart. A representative part number is DASH DESIGNS 29800C.

The Suede section lists 2 options from DASH DESIGNS — grouped under the catalog's "Suede" designation — the notes column spells out what sets them apart. DASH DESIGNS 29800B is listed in this group.

In the Velour grade, DASH DESIGNS supplies 1 part: grouped under the catalog's "Velour" designation — the notes column spells out what sets them apart. A representative part number is DASH DESIGNS 29800V.

In the Woven grade, DASH DESIGNS supplies 2 parts: grouped under the catalog's "Woven" designation — the notes column spells out what sets them apart. A representative part number is DASH DESIGNS 29800X.

This group includes DASH DESIGNS 29800C, DASH DESIGNS 29800B and DASH DESIGNS 29800D and the remaining parts above.

This table covers the floor mats cut for this cabin. Read more

10 Floor Mat parts are listed for the 2018 Toyota Highlander, from 3D and DASH DESIGNS. 3D L1TY1631150 carries the "Popular" badge. All of them fit every engine offered in the 2018 Highlander.

The All Weather section lists 6 options from 3D — grouped under the catalog's "All Weather" designation — the notes column spells out what sets them apart. 3D L1TY1631150 is listed in this group.

The Carpet section: 4 options from DASH DESIGNS and 3D. 3D L1TY1630470 is listed in this group.

This table covers the interior door handles. Typical signs include a handle that works only from one side, or a broken lever inside the housing. Confirm inside vs outside and paint code in the notes. Read more

DORMAN supplies the 19 Inside Door Handle parts for the 2018 Toyota Highlander. DORMAN 88156 carries the "Popular" badge. All of them fit every engine offered in the 2018 Highlander.

This table covers the Radio Installation kits. Read more

2 Radio Installation Kit parts for the 2018 Toyota Highlander come from METRA. Every part fits all 3 engine options (2.7L L4, 3.5L V6 and 3.5L V6 ELECTRIC/GAS).

This group includes METRA 958248B and METRA 998248B.

This table covers the interfaces that connect an aftermarket radio to the factory harness. Read more

METRA supplies the 6 Radio Module Interface parts for the 2018 Toyota Highlander. METRA AXSWC carries the "Popular" badge. All of them fit every engine offered in the 2018 Highlander.

Listed part numbers: METRA AXSWC, METRA AXDISTY2 and METRA AXBT, plus the other parts above.

This table covers the Rain Sensor pads. Typical signs include squeal, grind, or a wear-indicator scrape. Replace pads as an axle set and inspect the rotor or drum they ride on. Read more

This group shows a single part: PRECISION RSK2685.

This table covers the stops on a seat-belt buckle button. Read more

One part is listed for the 2018 Toyota Highlander — DORMAN 74358.

This table covers the aftermarket and replacement seat covers listed for this cabin. Typical signs include split seams, collapsed foam showing through, or a cover that has shrunk off the bolster. Confirm row and material in the notes; many covers are side- and trim-specific. Read more

DASH DESIGNS supplies the 56 Seat Cover parts for the 2018 Toyota Highlander. DASH DESIGNS K0204G0O carries the "Popular" badge. Mesh, Neoprene, Neosupreme, Polyester Blend, Tweed and Velour are all represented, and Neosupreme alone accounts for 16 parts.

This table covers the speakers in this cabin position. Read more

2 Speaker parts for the 2018 Toyota Highlander come from TAILORED AUDIO. Every part fits all 3 engine options (2.7L L4, 3.5L V6 and 3.5L V6 ELECTRIC/GAS).

Listed part numbers: TAILORED AUDIO SPJVCKIT1126 and TAILORED AUDIO SPJVCKIT1125.

This table covers the brackets that mount the Speaker. Typical signs include a cracked mount, a rattle, or a bracket that no longer holds alignment. Confirm position in the notes. Many brackets look alike and bolt to different corners. Read more

This group shows a single part: METRA 824201.

This table covers the Sun visors. Read more

4 Sun Visor parts for the 2018 Toyota Highlander come from SHEE-MAR. Every part fits all 3 engine options (2.7L L4, 3.5L V6 and 3.5L V6 ELECTRIC/GAS).

Part numbers include SHEE-MAR SM2718, SHEE-MAR SM2719 and SHEE-MAR SM2720, among others listed above.

This table covers the motors that drive a window regulator. Typical signs include no motion, a squeal, or a motor that only runs on one speed. Confirm power, ground and the control module before replacing the motor. Read more

11 Window Motor parts for the 2018 Toyota Highlander come from 5 brands — CARDONE, DORMAN, AISIN and 2 other brands. The "Popular" part is DORMAN 742608. Every part fits all 3 engine options (2.7L L4, 3.5L V6 and 3.5L V6 ELECTRIC/GAS).

The Economy section lists 5 options from DORMAN, CARDONE and ULTRA-POWER — the catalog's value-priced group. DORMAN 742608 is listed in this group.

In the Standard Replacement grade, AISIN, CARDONE and WAI GLOBAL supply 6 parts: built to original-equipment specification. A representative part number is AISIN RMT004.

This table covers the regulators that raise and lower each door glass. Read more

8 Window Regulator parts for the 2018 Toyota Highlander come from 4 brands — DORMAN, AISIN, TECHPRO and 1 other brand. The "Popular" part is DORMAN 740090. Every part fits all 3 engine options (2.7L L4, 3.5L V6 and 3.5L V6 ELECTRIC/GAS).

Listed part numbers: DORMAN 740090, DORMAN 740091 and AISIN RPT150, plus the other parts above.

This table covers combined regulator-and-motor assemblies for a door. Read more

5 Window Regulator & Motor Assembly parts are listed for the 2018 Toyota Highlander, from TECHPRO, WAI GLOBAL and TYC. TYC 660631 carries the "Popular" badge. All of them fit every engine offered in the 2018 Highlander.

This group includes TYC 660631, TECHPRO TO1351239 and TECHPRO TO1350239 and the remaining parts above.