This page lists 57 wheel parts for the 2018 Toyota Highlander, across 8 part types, covering all 3 engine options (2.7L L4, 3.5L V6 and 3.5L V6 ELECTRIC/GAS). Every part shows its brand, manufacturer part number and fitment notes.
The wheel hardware on the 2018 Toyota Highlander covers lug nuts, studs, hub caps, TPMS sensors and trim rings. The largest groups are Tire Pressure Monitoring System (TPMS) Stem / Service Kit (15 parts), Lug Nut Lock (13 parts) and Lug Nut (12 parts). The other 5 part types cover the remaining 17 parts.
The 2018 Toyota Highlander was sold with 3 engines. 56 parts fit every engine; the other 1 is engine-specific. Each part shows which engine(s) it fits.
11 brands supply wheel parts for the 2018 Toyota Highlander, led by DORMAN (20 parts), MCGARD (10 parts) and STANDARD MOTOR PRODUCTS (10 parts), plus 8 more brands. Quality grades include Daily Driver, Premium and Hardware Only.
A "Popular" badge means the source catalog flagged the part as frequently chosen for the 2018 Toyota Highlander. 11 parts have it, including DORMAN 711306 (Lug Nut) and DORMAN 712328 (Lug Nut Lock). Each part number opens a page with every vehicle that part fits.
Lug Nut
Daily Driver
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Popular Fits: all 2018 Highlander engines | 711306 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Open EndSteel | View on Amazon |
| DORMAN Popular Fits: all 2018 Highlander engines | 713385 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Open EndCarbon Steel | View on Amazon |
| DORMAN Popular Fits: all 2018 Highlander engines | 611211 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Closed EndSteel | View on Amazon |
| DORMAN Fits: all 2018 Highlander engines | 611183 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Open EndSteel | View on Amazon |
| DORMAN Fits: all 2018 Highlander engines | 711832 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Open EndSteel | View on Amazon |
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| PTC Fits: all 2018 Highlander engines | 98168 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | M12-1.50 Mag | View on Amazon |
| ULTRA-POWER Fits: all 2018 Highlander engines | 711832 | 🇺🇸 US 🇨🇦 CA | Chrome | View on Amazon |
| ULTRA-POWER Fits: all 2018 Highlander engines | 711306 | 🇺🇸 US 🇨🇦 CA | Chrome | View on Amazon |
| ULTRA-POWER Fits: all 2018 Highlander engines | 611183 | 🇺🇸 US 🇨🇦 CA | Chrome | View on Amazon |
Premium
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MCGARD Fits: all 2018 Highlander engines | 64002 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | M12 X 1.5 Cone Seat Style Lug Nuts- 13/16 Hex | View on Amazon |
| MCGARD Fits: all 2018 Highlander engines | 64012 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | M12 x 1.5 Bulge Cone Seat Style Lug Nuts- 3/4 Hex | View on Amazon |
| MCGARD Fits: all 2018 Highlander engines | 65357 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | M12 x 1.5 Tuner Style Cone Seat Lug Nuts | View on Amazon |
This table covers the lug nuts that hold each wheel on the hub.
12 Lug Nut parts are listed for the 2018 Toyota Highlander, from DORMAN, ULTRA-POWER, MCGARD and 1 other brand. DORMAN 711306 carries the "Popular" badge. All of them fit every engine offered in the 2018 Highlander.
The Daily Driver section lists 5 options from DORMAN — grouped for everyday commuting duty. DORMAN 711306 is listed in this group.
In the Economy grade, ULTRA-POWER and PTC supply 4 parts: the catalog's value-priced group. A representative part number is PTC 98168.
The Premium section lists 3 options from MCGARD — a step above OE specification in materials, tolerances or warranty terms. MCGARD 64002 is listed in this group.
Lug Nut & Lock Kit
Daily Driver
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: all 2018 Highlander engines | 711315 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Thread Size: M12-1.50Spline Drive | View on Amazon |
Premium
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MCGARD Fits: all 2018 Highlander engines | 65557 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Tuner Style Cone Seat Wheel Installation Kit(16 Lug Nuts / 1 Installation Tool / 4 Wheel Locks / 1 Key / 1 Key Pouch) | View on Amazon |
| MCGARD Fits: all 2018 Highlander engines | 84557 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | M12 x 1.5 Cone Seat Exposed Style Wheel Installation Box Kit-13/16 Hex(16 Lug Nuts / 4 Wheel Locks / 1 Key / 1 Key Pouch) | View on Amazon |
| MCGARD Fits: all 2018 Highlander engines | 84519 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | M12 x 1.5 ThreadCone Seat | View on Amazon |
This table covers the Lug Nut & Lock kits.
4 Lug Nut & Lock Kit parts for the 2018 Toyota Highlander come from 2 brands — MCGARD and DORMAN. Every part fits all 3 engine options (2.7L L4, 3.5L V6 and 3.5L V6 ELECTRIC/GAS).
Daily Driver: 1 part, from DORMAN. A representative part number is DORMAN 711315.
Premium: 3 parts, from MCGARD. A representative part number is MCGARD 65557.
Listed part numbers: DORMAN 711315, MCGARD 65557 and MCGARD 84557, plus the other parts above.
Lug Nut Installation Tool / Key
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MCGARD Fits: all 2018 Highlander engines | 65300 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Tuner Style Lug Installation Tool-with M12 & 1/2 Tuner Lugs | View on Amazon |
This table covers the keys used to install locking lug nuts.
One part is listed for the 2018 Toyota Highlander — MCGARD 65300.
Lug Nut Lock
Daily Driver
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Popular Fits: all 2018 Highlander engines | 712328 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | ChromeThread Size: M12-1.50 | View on Amazon |
| DORMAN Popular Fits: all 2018 Highlander engines | 711355LOCK | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Thread Size: M12-1.50Spline Drive | View on Amazon |
| DORMAN Fits: all 2018 Highlander engines | 712380 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | ChromeThread Size: M12-1.50 | View on Amazon |
| DORMAN Fits: all 2018 Highlander engines | 711325 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | ChromeThread Size: M12-1.50 | View on Amazon |
| DORMAN Fits: all 2018 Highlander engines | 711341 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | ChromeThread Size: M12-1.50 | View on Amazon |
| DORMAN Fits: all 2018 Highlander engines | 711342 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Thread Size: M12-1.50Bulge Seat Acorn Lock | View on Amazon |
| DORMAN Fits: all 2018 Highlander engines | 712390 | 🇺🇸 US 🇨🇦 CA | (4 Locks / 1 Key) | View on Amazon |
| DORMAN Fits: all 2018 Highlander engines | 711345 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | ChromeThread Size: M12-1.50 | View on Amazon |
| DORMAN Fits: all 2018 Highlander engines | 711346 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | ChromeThread Size: M12-1.50 | View on Amazon |
| DORMAN Fits: all 2018 Highlander engines | 711335LOCK | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Thread Size: M12-1.50Bulge Seat Acorn Lock | View on Amazon |
Premium
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MCGARD Popular Fits: all 2018 Highlander engines | 24157 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | M12 x 1.5 Cone Seat Exposed Style Wheel Locks-1.28 OAL(4 Locks / 1 Key) | View on Amazon |
| MCGARD Fits: all 2018 Highlander engines | 24012 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | M12 x 1.5 ThreadCone Seat | View on Amazon |
| MCGARD Fits: all 2018 Highlander engines | 25257 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | M12 x 1.5 Tuner Style Cone Seat Wheel Locks- 1.24 OAL(4 Locks / 1 Key) | View on Amazon |
This table covers the locking lug nuts and keys.
13 Lug Nut Lock parts for the 2018 Toyota Highlander come from 2 brands — DORMAN and MCGARD. The "Popular" part is DORMAN 712328. Every part fits all 3 engine options (2.7L L4, 3.5L V6 and 3.5L V6 ELECTRIC/GAS).
Daily Driver: 10 parts, from DORMAN. A representative part number is DORMAN 712328.
Premium: 3 parts, from MCGARD. A representative part number is MCGARD 24157.
Lug Stud
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: all 2018 Highlander engines | 610266 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Thread Size: M12-1.5Thread Size: M12-1.50 | View on Amazon |
| DORMAN Fits: all 2018 Highlander engines | 610659 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Thread Size: M12-1.50 | View on Amazon |
| PTC Fits: all 2018 Highlander engines | 97192 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits RearM12-1.50 Serrated Wheel Stud | View on Amazon |
This table covers the Lug studs.
3 Lug Stud parts for the 2018 Toyota Highlander come from 2 brands — DORMAN and PTC. Every part fits all 3 engine options (2.7L L4, 3.5L V6 and 3.5L V6 ELECTRIC/GAS).
Part numbers include DORMAN 610266, DORMAN 610659 and PTC 97192.
Tire Pressure Monitoring System (TPMS) Sensor
Aftermarket / Multi-Application (Programmed)
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: 3.5L V6, 3.5L V6 ELECTRIC/GAS | 974085 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Limited or SE Model or XLE Model | View on Amazon |
| ULTRA-POWER Fits: all 2018 Highlander engines | TPM180 | 🇺🇸 US 🇨🇦 CA | Tire Pressure Monitoring System Sensorwithout Multi Function Display | View on Amazon |
OE Replacement (Programmed)
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BH SENS Popular Fits: all 2018 Highlander engines | RDE078V21 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | OE Quality 315MHZ Replacement SensorNo Programming Required | View on Amazon |
| DENSO Popular Fits: all 2018 Highlander engines | 5500105 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | OE ManufacturedProgrammed | View on Amazon |
| BH SENS Fits: all 2018 Highlander engines | RDE057V21 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | OE Quality 315MHZ Replacement SensorNo Programming Required | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: all 2018 Highlander engines | TPM180 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Programmed | View on Amazon |
Premium (Programmed + Clone Capable)
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Fits: all 2018 Highlander engines | TPM206A | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Programmed | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: all 2018 Highlander engines | TPM180A | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Programmed | View on Amazon |
This table covers the TPMS sensors mounted in each wheel. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors.
8 Tire Pressure Monitoring System (TPMS) Sensor parts are listed for the 2018 Toyota Highlander, from STANDARD MOTOR PRODUCTS, BH SENS, DORMAN and 2 other brands. BH SENS RDE078V21 carries the "Popular" badge. 7 parts fit every engine; the other 1 is engine-specific.
In the Aftermarket / Multi-Application (Programmed) grade, DORMAN and ULTRA-POWER supply 2 parts: grouped under the catalog's "Aftermarket / Multi-Application (Programmed)" designation — the notes column spells out what sets them apart. A representative part number is DORMAN 974085.
The OE Replacement (Programmed) section lists 4 options from BH SENS, DENSO and STANDARD MOTOR PRODUCTS — manufactured to match the original-equipment part in form, fit and function. BH SENS RDE078V21 is listed in this group.
In the Premium (Programmed + Clone Capable) grade, STANDARD MOTOR PRODUCTS supplies 2 parts: a step above OE specification in materials, tolerances or warranty terms. A representative part number is STANDARD MOTOR PRODUCTS TPM206A.
Part numbers include BH SENS RDE078V21, DORMAN 974085 and ULTRA-POWER TPM180, among others listed above.
Tire Pressure Monitoring System (TPMS) Sensor Retrofit Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SCHRADER Fits: all 2018 Highlander engines | 295002 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Schrader TPMS Retrofit Kit For trailers, Tow behind campers, and RVSPack of 2 | View on Amazon |
This table covers the Tire Pressure Monitoring System (TPMS) Sensor Retrofit kits.
This group shows a single part: SCHRADER 295002.
Tire Pressure Monitoring System (TPMS) Stem / Service Kit
Hardware Only
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Popular Fits: all 2018 Highlander engines | TPM4012SK | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Qwik-Sensor Service KitSold Individually | View on Amazon |
| ACDELCO Fits: all 2018 Highlander engines | TPMSKIT1 | 🇺🇸 US 🇨🇦 CA | GoldIncludes Hex Nut, Valve Core, Stem Cap, Seal Cup Washer, and Instruction Sheet | View on Amazon |
| SCHRADER Fits: all 2018 Highlander engines | 20032 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Clamp-In componentsFrequency: 315.0 MHz | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: all 2018 Highlander engines | TPM1100K | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Mounting Style: Screwithoutn Core, Seal, Washer, Retaining Nut, Cap | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: all 2018 Highlander engines | TPM2040K | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Mounting Style: ScrewithoutnContents: Tire Pressure Monitor Valve Stem Kit | View on Amazon |
| ULTRA-POWER Fits: all 2018 Highlander engines | TPM1100K | 🇺🇸 US 🇨🇦 CA | Tire Pressure Monitoring System Sensor Service Kitwithout MULTI FUNCTION DISPLAY | View on Amazon |
| VDO / CONTINENTAL Fits: all 2018 Highlander engines | SE54190 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | OE and Redi Sensor Kit433.92 MHz or 315 MHz | View on Amazon |
Valve Stem Assembly
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| STANDARD MOTOR PRODUCTS Popular Fits: all 2018 Highlander engines | TPM2011VK | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Qwik-Sensor ValveSold Individually | View on Amazon |
| DORMAN Fits: all 2018 Highlander engines | 974300 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits only Dorman Programmable Universal MULTI-FIT TPMS Sensors | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: all 2018 Highlander engines | TPM2012VK | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Sold Individually | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: all 2018 Highlander engines | TPM2012VBK | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Qwik-Sensor Valve | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: all 2018 Highlander engines | TPM2012VCK | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Qwik-Sensor Valve | View on Amazon |
| VDO / CONTINENTAL Fits: all 2018 Highlander engines | SE54197 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Continental OE Sensor Kit | View on Amazon |
| VDO / CONTINENTAL Fits: all 2018 Highlander engines | SE54191 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Continental OE Sensor Kit | View on Amazon |
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DILL AIR CONTROL Popular Fits: all 2018 Highlander engines | 7020K | 🇺🇸 US 🇨🇦 CA | Tire Pressure Monitoring System Sensor Service KitInstallation Torque (In-LBS) 71 | View on Amazon |
This table covers TPMS valve stems and the service kits used when a tire is changed.
15 Tire Pressure Monitoring System (TPMS) Stem / Service Kit parts for the 2018 Toyota Highlander come from 7 brands — STANDARD MOTOR PRODUCTS, VDO / CONTINENTAL, ACDELCO and 4 other brands. The "Popular" part is STANDARD MOTOR PRODUCTS TPM4012SK. Every part fits all 3 engine options (2.7L L4, 3.5L V6 and 3.5L V6 ELECTRIC/GAS).
The Hardware Only section lists 7 options from STANDARD MOTOR PRODUCTS, ACDELCO, SCHRADER and 2 other brands — grouped under the catalog's "Hardware Only" designation — the notes column spells out what sets them apart. STANDARD MOTOR PRODUCTS TPM4012SK is listed in this group.
In the Valve Stem Assembly grade, STANDARD MOTOR PRODUCTS, VDO / CONTINENTAL and DORMAN supply 7 parts: grouped under the catalog's "Valve Stem Assembly" designation — the notes column spells out what sets them apart. A representative part number is STANDARD MOTOR PRODUCTS TPM2011VK.
1 further part sits outside the graded sections, with the same engine-level match.
Buying Wheel Parts for a 2018 Toyota Highlander
On this vehicle, the wheel hardware covers lug nuts, studs, hub caps, TPMS sensors and trim rings.
- Match the engine first. Some wheel parts fit every engine; others are engine-specific. Each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the TPMS service kit (valve core, seal, nut) with every tire change on sensor-equipped wheels.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Tire Pressure Monitoring System (TPMS) Stem / Service Kit and Lug Nut Lock .
Frequently Asked Questions
How many wheel parts fit the 2018 Toyota Highlander?
Our catalog currently lists 57 wheel parts for the 2018 Toyota Highlander across 8 subcategories and 11 brands, covering all 3 engine options (2.7L L4, 3.5L V6 and 3.5L V6 ELECTRIC/GAS). Each part is matched to the engine(s) it fits.
Do wheel parts differ between 2018 Toyota Highlander engines?
Some do. 56 parts fit every engine; the other 1 is engine-specific. Each row (and the filter at the top) shows which. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of wheel problems on a 2018 Toyota Highlander?
Common symptoms include a TPMS light that will not clear, vibration after a wheel was serviced, or studs damaged by past over-torquing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the TPMS service kit (valve core, seal, nut) with every tire change on sensor-equipped wheels.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2018 Toyota Highlander was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2018 Toyota Highlander?
First match the engine — each row shows which engine(s) the part fits. Then always torque lug nuts to spec in a star pattern — impact guns without torque sticks warp rotors and stretch studs. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2018 Toyota Highlander
Wheel Parts for Other Toyota Highlander Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.