2019 Toyota Highlander Ignition Parts

This table covers the sensors that report camshaft position to the ECU. Typical signs include a stall, a no-start, or a code for cam or crank correlation. Check the connector and the reluctor gap before replacing the sensor. Read more

28 Camshaft Position Sensor parts are listed for the 2019 Toyota Highlander, from STANDARD MOTOR PRODUCTS, AUTOTECNICA, HOLSTEIN and 14 other brands. DORMAN 907856 carries the "Popular" badge. Economy and Standard Replacement are all represented, and Standard Replacement alone accounts for 17 parts.

This table covers the sensors that report crankshaft position and engine speed. Typical signs include a stall, a no-start, or a code for cam or crank correlation. Check the connector and the reluctor gap before replacing the sensor. Read more

24 Crankshaft Position Sensor parts are listed for the 2019 Toyota Highlander, from STANDARD MOTOR PRODUCTS, WELLS, WALKER PRODUCTS and 12 other brands. SPECTRA PREMIUM S10338 carries the "Popular" badge.

In the Economy grade, SPECTRA PREMIUM, ULTRA-POWER, DORMAN and 3 other brands supply 6 parts: the catalog's value-priced group. A representative part number is SPECTRA PREMIUM S10338.

The Standard Replacement section lists 18 options from STANDARD MOTOR PRODUCTS, WELLS, WALKER PRODUCTS and 7 other brands — built to original-equipment specification. FACET 90633 is listed in this group.

This table covers the coils that fire each spark plug. Typical signs include a misfire that follows one cylinder, a snap in damp weather, or a coil that is swollen or cracked. Swap a suspect coil with a neighbor to confirm, then replace boots that tore on the way off. Read more

53 Ignition Coil parts are listed for the 2019 Toyota Highlander, from WALKER PRODUCTS, STANDARD MOTOR PRODUCTS, NGK and 19 other brands. ULTRA-POWER 5C1653 carries the "Popular" badge. They are grouped as Economy, Full Service Kit, Premium and Standard Replacement, with Standard Replacement the largest group at 29 parts from WALKER PRODUCTS, NGK, BECK/ARNLEY and 9 other brands.

This table covers the lock cylinders in the ignition switch. Read more

2 Ignition Lock Cylinder parts are listed for the 2019 Toyota Highlander, from STANDARD MOTOR PRODUCTS and WELLS. All of them fit every engine offered in the 2019 Highlander.

Part numbers include STANDARD MOTOR PRODUCTS US640L and WELLS 4H1880.

This table covers the spark plugs for this engine. Typical signs include misfire under load, rough idle, or a flashing check-engine light. Verify the gap even on pre-gapped plugs, and replace coil boots that come off a high-mileage engine. Read more

18 Spark Plug parts for the 2019 Toyota Highlander come from 5 brands — NGK, CHAMPION, DENSO and 2 other brands. The "Popular" part is CHAMPION 446.

The Copper / Nickel section lists 2 options from CHAMPION — grouped under the catalog's "Copper / Nickel" designation — the notes column spells out what sets them apart. CHAMPION 446 is listed in this group.

The Double Platinum (lasts up to 3x longer than Copper / Nickel) section lists 1 option from CHAMPION — grouped under the catalog's "Double Platinum (lasts up to 3x longer than Copper / Nickel)" designation — the notes column spells out what sets them apart. CHAMPION 7975 is listed in this group.

In the Iridium (lasts up to 4x longer than Copper / Nickel) grade, DENSO, NGK, CHAMPION and 2 other brands supply 13 parts: grouped under the catalog's "Iridium (lasts up to 4x longer than Copper / Nickel)" designation — the notes column spells out what sets them apart. A representative part number is AUTOLITE XP5325.

The Platinum (lasts up to 2x longer than Copper / Nickel) section lists 1 option from NGK — grouped under the catalog's "Platinum (lasts up to 2x longer than Copper / Nickel)" designation — the notes column spells out what sets them apart. NGK 5018 is listed in this group.

The Ruthenium (maximum durability & ignitability) section lists 1 option from NGK — grouped under the catalog's "Ruthenium (maximum durability & ignitability)" designation — the notes column spells out what sets them apart. NGK 96355 is listed in this group.

This table covers the silicone and rubber boots that insulate the coil-to-plug spark path. Typical signs include a misfire in the rain, carbon tracking on the boot, or a snap when you pop the coil off. Replace boots as a set on a high-mileage engine; one cracked boot will take the coil with it. Read more

5 Spark Plug / Ignition Coil Boot parts are listed for the 2019 Toyota Highlander, from STANDARD MOTOR PRODUCTS and WELLS.

Economy: 1 part, from STANDARD MOTOR PRODUCTS. A representative part number is STANDARD MOTOR PRODUCTS 19461.

The Standard Replacement section: 2 options from STANDARD MOTOR PRODUCTS and WELLS. STANDARD MOTOR PRODUCTS SPP140E is listed in this group.

2 ungrouped parts are not assigned to a grade, with the same engine-level match.

This group includes STANDARD MOTOR PRODUCTS 19461, STANDARD MOTOR PRODUCTS SPP140E and WELLS 4C2073 and the remaining parts above.

This table covers the seals at the Spark Plug Tube. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Spark Plug Tube Seal parts are listed for the 2019 Toyota Highlander, from BECK/ARNLEY and MAHLE / CLEVITE.

This group includes BECK/ARNLEY 0396686 and MAHLE / CLEVITE GS34092.