2019 Toyota Highlander Drivetrain Parts

This table covers the seals where an axle shaft exits the housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Axle Shaft Seal parts are listed for the 2019 Toyota Highlander, from TIMKEN, NATIONAL and WJB / INMOTION PARTS. NATIONAL 711097 carries the "Popular" badge. 3 parts fit every engine; the other 2 are engine-specific.

Listed part numbers: NATIONAL 711097, TIMKEN SL260467 and TIMKEN SL260419, plus the other parts above.

This table covers the complete CV axle shafts from differential (or hub) to wheel. Typical signs include a click in tight turns, grease flung around the wheel well, or a vibration that builds with speed. A torn boot caught early is a boot kit; caught late it is the whole axle. Torque the axle nut to the method in the notes. Read more

41 CV Axle parts are listed for the 2019 Toyota Highlander, from TRAKMOTIVE, GSP, TOP NOTCH and 3 other brands. APWI TO8353A carries the "Popular" badge. Economy and Standard Replacement are all represented, and Standard Replacement alone accounts for 13 parts.

This table covers the brackets that mount the CV Axle Support Bearing. Typical signs include a cracked mount, a rattle, or a bracket that no longer holds alignment. Confirm position in the notes. Many brackets look alike and bolt to different corners. Read more

This group shows a single part: DORMAN 926195.

This table covers the boots that keep grease in a CV joint. Typical signs include a split boot, grease flung around the joint, or a click once grit is inside. A boot caught early is a kit. Once the joint has clicked, the joint itself is usually worn. Read more

BECK/ARNLEY supplies both parts for the 2019 Toyota Highlander.

Listed part numbers: BECK/ARNLEY 1033191 and BECK/ARNLEY 1032818.

This table covers the bearings and races on the differential pinion. Read more

2 Differential Pinion Bearing / Race parts for the 2019 Toyota Highlander come from SKF. Every part fits all 3 engine options (2.7L L4, 3.5L V6 and 3.5L V6 ELECTRIC/GAS).

Listed part numbers: SKF BR3568 and SKF BR3062.

This table covers the wear sleeves used to restore a grooved pinion seal surface. Read more

2 Differential Pinion Repair Sleeve parts are listed for the 2019 Toyota Highlander, from NATIONAL and WJB / INMOTION PARTS. All of them fit every engine offered in the 2019 Highlander.

Listed part numbers: NATIONAL 99210 and WJB / INMOTION PARTS WS99210.

This table covers the seals at the differential pinion yoke. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Differential Pinion Seal parts are listed for the 2019 Toyota Highlander, from NATIONAL, SCHAEFFLER, SKF and 1 other brand. All of them fit every engine offered in the 2019 Highlander.

Part numbers include NATIONAL 711098, SCHAEFFLER SS3130 and SKF 21268, among others listed above.

This table covers the driveshafts that carry torque from the transmission or transfer case. Read more

6 Drive Shaft parts for the 2019 Toyota Highlander come from 6 brands — DORMAN, TOP NOTCH, ACKOJA and 3 other brands. The "Popular" part is DORMAN 976413. 1 part fits every engine; the other 5 are engine-specific.

Part numbers include DORMAN 976413, TOP NOTCH TN6933PS and ACKOJA A709973, among others listed above.

This table covers the Drive Shaft Center Support bearings. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

9 Drive Shaft Center Support Bearing parts for the 2019 Toyota Highlander come from 4 brands — PIONEER, ANCHOR, ACKOJA and 1 other brand. The "Popular" part is ANCHOR 6083. 7 parts fit every engine; the other 2 are engine-specific.

This group includes ANCHOR 6083, ANCHOR 6082 and ACKOJA A709578 and the remaining parts above.

This table covers the gear oils specified for the axle or transfer case. Typical signs include a low-oil lamp, knocking, or oil that has gone thin before the next interval. Match the viscosity and spec in the notes, not just the weight on the bottle. Read more

13 Gear Oil parts are listed for the 2019 Toyota Highlander, from VALVOLINE, PENTOSIN, LUCAS OIL and 3 other brands. ACDELCO 109243 carries the "Popular" badge.

The ATF 64 section lists 2 options from PENTOSIN — grouped under the catalog's "ATF 64" designation — the notes column spells out what sets them apart. PENTOSIN 1058113 is listed in this group.

In the Dexron grade, ACDELCO supplies 1 part: grouped under the catalog's "Dexron" designation — the notes column spells out what sets them apart. A representative part number is ACDELCO 109243.

In the Multi-Vehicle grade, VALVOLINE, LUCAS OIL and MOBIL supply 6 parts: grouped under the catalog's "Multi-Vehicle" designation — the notes column spells out what sets them apart. A representative part number is VALVOLINE VV3246.

4 ungrouped parts are not assigned to a grade, with the same engine-level match.

This table covers the fluids specified for the transfer case. Typical signs include discolored fluid, a burnt smell, or a level that keeps dropping. Use only the specification in the notes — the tables group grades because they are not interchangeable. Read more

3 Transfer Case Fluid parts are listed for the 2019 Toyota Highlander, from VALVOLINE and IDEMITSU.

Part numbers include IDEMITSU 30305024750, VALVOLINE 915052 and VALVOLINE 915053.

This table covers the seals at the Transfer Case Housing Extension. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Transfer Case Housing Extension Seal parts for the 2019 Toyota Highlander come from 3 brands — BCA, NATIONAL and WJB / INMOTION PARTS. Every part fits all 3 engine options (2.7L L4, 3.5L V6 and 3.5L V6 ELECTRIC/GAS).

Part numbers include BCA NS710319, NATIONAL 710319 and WJB / INMOTION PARTS WS710319.

This table covers the seals at the Transfer Case Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Transfer Case Output Shaft Seal parts are listed for the 2019 Toyota Highlander, from NATIONAL and WJB / INMOTION PARTS. All of them fit every engine offered in the 2019 Highlander.

Listed part numbers: NATIONAL 711075, NATIONAL 710954 and WJB / INMOTION PARTS WS710954, plus the other parts above.

This table covers the U-joints in the driveshaft. Read more

One part is listed for the 2019 Toyota Highlander — GKN U024.