2020 Toyota C-HR Engine Parts

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

4 Conversion / Lower Gasket Set parts are listed for the 2020 Toyota C-HR, from AJUSA, APEX, FEL-PRO and 1 other brand.

Part numbers include AJUSA 54242200, APEX ACS8081 and FEL-PRO CS26515, among others listed above.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

2 Crankshaft Main Bearing parts for the 2020 Toyota C-HR come from TOPLINE.

This group includes TOPLINE TWTO39 and TOPLINE MBTO55.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

9 Crankshaft Seal parts for the 2020 Toyota C-HR come from 6 brands — FEL-PRO, APEX, VICTOR REINZ and 3 other brands. The "Popular" part is FEL-PRO TCS46148.

Part numbers include FEL-PRO TCS46148, FEL-PRO BS40732 and AJUSA 15062600, among others listed above.

This table covers the bolts that clamp the cylinder head to the block. Read more

5 Cylinder Head Bolt parts are listed for the 2020 Toyota C-HR, from FEL-PRO, APEX, BECK/ARNLEY and 2 other brands. FEL-PRO ES72434 carries the "Popular" badge.

Listed part numbers: FEL-PRO ES72434, APEX AHB881 and BECK/ARNLEY 0161075, plus the other parts above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Cylinder Head Gasket parts are listed for the 2020 Toyota C-HR, from FEL-PRO, AJUSA, APEX and 2 other brands. FEL-PRO 26515PT carries the "Popular" badge.

Listed part numbers: FEL-PRO 26515PT, AJUSA 10190900 and APEX AHG881, plus the other parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

7 Cylinder Head Gasket Set parts are listed for the 2020 Toyota C-HR, from FEL-PRO, APEX, AJUSA and 3 other brands. APEX AHS8081 carries the "Popular" badge.

Part numbers include APEX AHS8081, FEL-PRO HS26515PT and AJUSA 52460200, among others listed above.

This table covers the Engine covers. Read more

7 Engine Cover parts are listed for the 2020 Toyota C-HR, from TECHPRO and VARIOUS MFR.

Listed part numbers: TECHPRO TO1228280, TECHPRO TO1228229 and TECHPRO TO1228230, plus the other parts above.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Engine Kit Gasket Set parts are listed for the 2020 Toyota C-HR, from AJUSA and TOPLINE.

This group includes AJUSA 50420600 and TOPLINE CGSTO55.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

3 Exhaust Valve parts for the 2020 Toyota C-HR come from 3 brands — MELLING, SBI and TOPLINE.

Part numbers include MELLING V3366, SBI 13366 and TOPLINE EVTO55.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

5 Harmonic Balancer parts are listed for the 2020 Toyota C-HR, from ULTRA-POWER, ACKOJA, ATP and 2 other brands. ULTRA-POWER 594705 carries the "Popular" badge.

Listed part numbers: ULTRA-POWER 594705, ACKOJA A700938 and ATP 102342, plus the other parts above.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Intake Manifold Gasket parts are listed for the 2020 Toyota C-HR, from APEX, BECK/ARNLEY, FEL-PRO and 1 other brand.

This group includes APEX AMS8810, BECK/ARNLEY 0376229 and FEL-PRO MS97144 and the remaining parts above.

This table covers the gaskets that seal the Intake to Exhaust. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: ELRING 299150.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

3 Intake Valve parts for the 2020 Toyota C-HR come from 3 brands — MELLING, SBI and TOPLINE.

Listed part numbers: MELLING V3365, SBI 13365 and TOPLINE IVTO55.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

8 Motor Mount parts for the 2020 Toyota C-HR come from 4 brands — PIONEER, ANCHOR, DEA / MARMON RIDE CONTROL and 1 other brand. The "Popular" part is ANCHOR 10175.

This group includes ANCHOR 10175, ANCHOR 10183 and DEA / MARMON RIDE CONTROL A42131 and the remaining parts above.

This table covers the Motor Mount kits. Read more

This group shows a single part: ANCHOR 300925.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

33 Oil parts for the 2020 Toyota C-HR come from 6 brands — VALVOLINE, LIQUI MOLY, MOBIL and 3 other brands. The "Popular" part is LIQUI MOLY 22044. Grades run from Full Synthetic through High Mileage (>75,000 Miles); Full Synthetic is the most populated section, led by LIQUI MOLY, VALVOLINE, MOBIL and 3 other brands.

This table covers the drain plugs in the oil pan. Read more

5 Oil Drain Plug parts for the 2020 Toyota C-HR come from 4 brands — DORMAN, AGS, BECK/ARNLEY and 1 other brand. The "Popular" part is DORMAN 090038.

Listed part numbers: DORMAN 090038, AGS ODP00011 and BECK/ARNLEY 0160116, plus the other parts above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Oil Drain Plug Gasket parts are listed for the 2020 Toyota C-HR, from DORMAN, AJUSA, FEL-PRO and 2 other brands. DORMAN 095156 carries the "Popular" badge.

Part numbers include DORMAN 095156, AJUSA 22005800 and FEL-PRO 70822, among others listed above.

This table covers the caps on the oil filler neck. Read more

3 Oil Filler Cap parts for the 2020 Toyota C-HR come from 3 brands — CALORSTAT, GATES and MOTORAD.

This group includes CALORSTAT OC2312, GATES 31285 and MOTORAD MO155.

This table covers the gaskets that seal the Oil Filler Cap. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2020 Toyota C-HR — AJUSA 00519100.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

33 Oil Filter parts for the 2020 Toyota C-HR come from 16 brands — FRAM, WIX, VARIOUS MFR and 13 other brands. The "Popular" part is PRO-TEC PXL51394. Economy, High Performance / Heavy Duty and Standard Replacement are all represented, and Standard Replacement alone accounts for 17 parts.

This table covers the Oil Filter Adapter Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

One part is listed for the 2020 Toyota C-HR — FEL-PRO ES71858.

This table covers the oil pans that hold the engine's oil sump. Read more

5 Oil Pan parts are listed for the 2020 Toyota C-HR, from AUTOTECNICA, DORMAN, REIN and 2 other brands. AUTOTECNICA TY1415247 carries the "Popular" badge.

Listed part numbers: AUTOTECNICA TY1415247, DORMAN 264324 and REIN ESK0201, plus the other parts above.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Oil Pan Gasket parts for the 2020 Toyota C-HR come from 3 brands — VICTOR REINZ, APEX and FEL-PRO.

This group includes APEX AOP881, FEL-PRO OS30829 and VICTOR REINZ 703141410 and the remaining parts above.

This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

3 Oil Pump parts for the 2020 Toyota C-HR come from 3 brands — MELLING, PIERBURG and TOPLINE.

This group includes MELLING M584, PIERBURG 706595110 and TOPLINE OPTO55A.

This table covers the chains that drive the oil pump. Read more

5 Oil Pump Chain parts are listed for the 2020 Toyota C-HR, from S.A. GEAR, PREFERRED COMPONENTS INC, CLOYES and 2 other brands. S.A. GEAR RC1036 carries the "Popular" badge.

The Chain Only section lists 1 option from S.A. GEAR — grouped under the catalog's "Chain Only" designation — the notes column spells out what sets them apart. S.A. GEAR RC1036 is listed in this group.

In the Economy grade, PREFERRED COMPONENTS INC supplies 1 part: the catalog's value-priced group. A representative part number is PREFERRED COMPONENTS INC C1001.

The Standard Replacement section lists 2 options from CLOYES and MELLING — built to original-equipment specification. CLOYES C751 is listed in this group.

1 ungrouped part is not assigned to a grade, with the same engine-level match.

This group includes S.A. GEAR RC1036, PREFERRED COMPONENTS INC C1001 and CLOYES C751 and the remaining parts above.

This table covers the Oil Pump Chain tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

2 Oil Pump Chain Tensioner parts for the 2020 Toyota C-HR come from 2 brands — MELLING and PREFERRED COMPONENTS INC.

Part numbers include MELLING BT5936 and PREFERRED COMPONENTS INC T68005.

This table covers the Oil Pump Drive gears. Read more

One part is listed for the 2020 Toyota C-HR — PREFERRED COMPONENTS INC G56125.

This table covers the O-rings that seal the oil-pump pickup tube. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

This group shows a single part: FEL-PRO 73595.

This table covers the Oil Pump sprockets. Read more

2 Oil Pump Sprocket parts are listed for the 2020 Toyota C-HR, from MELLING and S.A. GEAR.

Part numbers include MELLING S923, among others listed above.

This table covers the Piston Pin bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

This group shows a single part: TOPLINE PBTO39.

This table covers the timing chains that keep the cams in time with the crank. Read more

2 Timing Chain parts are listed for the 2020 Toyota C-HR, from CLOYES and S.A. GEAR.

This group includes CLOYES C579 and S.A. GEAR C1276.

This table covers kits that group a timing chain with the related tensioners and guides. Read more

3 Timing Chain & Component Kit parts for the 2020 Toyota C-HR come from 2 brands — CLOYES and S.A. GEAR.

The Economy section: 1 option from S.A. GEAR. S.A. GEAR 76494 is listed in this group.

Standard Replacement: 2 parts, from CLOYES. A representative part number is CLOYES 90579S.

Part numbers include S.A. GEAR 76494, CLOYES 90579S and CLOYES 90579SX.

This table covers the guides and dampers that keep the timing chain on its path. Read more

5 Timing Chain Guide / Damper parts are listed for the 2020 Toyota C-HR, from S.A. GEAR and CLOYES.

Listed part numbers: CLOYES 96321, CLOYES 96322 and S.A. GEAR 91489, plus the other parts above.

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

3 Timing Chain Tensioner parts for the 2020 Toyota C-HR come from 3 brands — MELLING, PREFERRED COMPONENTS INC and S.A. GEAR.

Part numbers include MELLING BT5935, PREFERRED COMPONENTS INC T66225 and S.A. GEAR 91135.

This table covers the Timing Chain Tensioner springs. Typical signs include a sagging corner, a broken coil, or a clunk from the spring pocket. Replace springs in axle pairs and inspect the seats. Read more

One part is listed for the 2020 Toyota C-HR — PREFERRED COMPONENTS INC T68004.

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: SKF 15355A.

This table covers the crankshaft sprockets that drive the timing chain or belt. Read more

4 Timing Crank Sprocket parts for the 2020 Toyota C-HR come from 3 brands — S.A. GEAR, CLOYES and PREFERRED COMPONENTS INC.

Part numbers include CLOYES S1225, PREFERRED COMPONENTS INC G56373 and S.A. GEAR S1330, among others listed above.

This table covers the Torque Strut mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

3 Torque Strut Mount parts are listed for the 2020 Toyota C-HR, from ANCHOR, DEA / MARMON RIDE CONTROL and WESTAR.

Part numbers include ANCHOR 10173, DEA / MARMON RIDE CONTROL A42130 and WESTAR EM7486.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Valve Cover Gasket parts for the 2020 Toyota C-HR come from 5 brands — BECK/ARNLEY, AJUSA, APEX and 2 other brands. The "Popular" part is BECK/ARNLEY 0361937.

Listed part numbers: BECK/ARNLEY 0361937, AJUSA 56041000 and APEX AVC881S, plus the other parts above.

This table covers the Valve Cover grommets. Read more

This group shows a single part: BECK/ARNLEY 0396605.

This table covers the pressed-in bronze and cast-iron guides that align valve stems. Typical signs include oil smoke on startup, a guide that has gone oval, or a valve that no longer seats quietly. Guides are a machine-shop fit. Confirm stem diameter in the notes before ordering. Read more

4 Valve Guide parts for the 2020 Toyota C-HR come from 2 brands — ENGINETECH and TOPLINE.

Part numbers include ENGINETECH GD3181, ENGINETECH GD3182 and TOPLINE EVGTO55, among others listed above.

This table covers the lifters / tappets that transfer cam motion to the valves. Read more

2 Valve Lifter parts for the 2020 Toyota C-HR come from 2 brands — AJUSA and TOPLINE.

Part numbers include AJUSA 85010900 and TOPLINE LIFTO55P.

This table covers the springs that close each intake and exhaust valve. Typical signs include a sagging corner, a broken coil, or a clunk from the spring pocket. Replace springs in axle pairs and inspect the seats. Read more

3 Valve Spring parts are listed for the 2020 Toyota C-HR, from QUALCAST and MELLING.

This group includes MELLING VS2510, QUALCAST 325507 and QUALCAST 325508.

This table covers the Valve Spring retainers. Read more

One part is listed for the 2020 Toyota C-HR — MELLING VSR726.

This table covers the keepers that lock each valve-spring retainer to the stem. Read more

2 Valve Spring Retainer Keeper parts are listed for the 2020 Toyota C-HR, from MELLING and SBI.

Listed part numbers: MELLING VL1100 and SBI 1211100.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Valve Stem Seal parts for the 2020 Toyota C-HR come from 4 brands — SBI, APEX, FEL-PRO and 1 other brand. The "Popular" part is APEX AVS8055.

This group includes APEX AVS8055, FEL-PRO SS728782 and SBI 1221266 and the remaining parts above.

This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

21 Variable Valve Timing (VVT) Solenoid / Actuator parts for the 2020 Toyota C-HR come from 11 brands — DORMAN, ROSTRA, SKP and 8 other brands. The "Popular" part is DORMAN 917235.

The Economy section: 14 options from DORMAN, ROSTRA, SKP and 4 other brands. DORMAN 917235 is listed in this group.

Standard Replacement: 7 parts, from NTK, BECK/ARNLEY, CLOYES and 1 other brand. A representative part number is NTK VV0064.

This table covers the cam phaser sprockets used by the variable-valve-timing system. Read more

This group shows a single part: STANDARD MOTOR PRODUCTS VVT850.