2021 Toyota C-HR Engine Parts

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Conversion / Lower Gasket Set parts for the 2021 Toyota C-HR come from 2 brands — AJUSA and TOPLINE.

Part numbers include AJUSA 54242200 and TOPLINE CBSTO55.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

TOPLINE supplies both parts for the 2021 Toyota C-HR.

This group includes TOPLINE TWTO39 and TOPLINE MBTO55.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

6 Crankshaft Seal parts are listed for the 2021 Toyota C-HR, from ELRING, FEL-PRO, AJUSA and 3 other brands. ELRING 135140 carries the "Popular" badge.

Listed part numbers: ELRING 135140, FEL-PRO BS40732 and AJUSA 15062600, plus the other parts above.

This table covers the bolts that clamp the cylinder head to the block. Read more

2 Cylinder Head Bolt parts for the 2021 Toyota C-HR come from 2 brands — BECK/ARNLEY and TOPLINE.

Part numbers include BECK/ARNLEY 0161075 and TOPLINE HBTO55.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Cylinder Head Gasket parts for the 2021 Toyota C-HR come from 5 brands — FEL-PRO, AJUSA, APEX and 2 other brands. The "Popular" part is FEL-PRO 26515PT.

Listed part numbers: FEL-PRO 26515PT, AJUSA 10190900 and APEX AHG881, plus the other parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Cylinder Head Gasket Set parts for the 2021 Toyota C-HR come from 3 brands — AJUSA, MAHLE / CLEVITE and TOPLINE.

This group includes AJUSA 52460200, MAHLE / CLEVITE HS54773 and TOPLINE HSTO55.

This table covers the Engine covers. Read more

7 Engine Cover parts for the 2021 Toyota C-HR come from 2 brands — TECHPRO and VARIOUS MFR.

Part numbers include TECHPRO TO1228280, TECHPRO TO1228229 and TECHPRO TO1228230, among others listed above.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

2 Engine Kit Gasket Set parts for the 2021 Toyota C-HR come from 2 brands — AJUSA and TOPLINE.

This group includes AJUSA 50420600 and TOPLINE CGSTO55.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

2 Exhaust Valve parts are listed for the 2021 Toyota C-HR, from MELLING and TOPLINE.

Part numbers include MELLING V3366 and TOPLINE EVTO55.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

5 Harmonic Balancer parts for the 2021 Toyota C-HR come from 5 brands — ULTRA-POWER, ACKOJA, ATP and 2 other brands. The "Popular" part is ULTRA-POWER 594705.

Part numbers include ULTRA-POWER 594705, ACKOJA A700938 and ATP 102342, among others listed above.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Intake Manifold Gasket parts for the 2021 Toyota C-HR come from 2 brands — APEX and BECK/ARNLEY.

Listed part numbers: APEX AMS8810 and BECK/ARNLEY 0376229.

This table covers the gaskets that seal the Intake to Exhaust. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

One part is listed for the 2021 Toyota C-HR — ELRING 299150.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

2 Intake Valve parts are listed for the 2021 Toyota C-HR, from MELLING and TOPLINE.

Part numbers include MELLING V3365 and TOPLINE IVTO55.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

8 Motor Mount parts are listed for the 2021 Toyota C-HR, from PIONEER, ANCHOR, DEA / MARMON RIDE CONTROL and 1 other brand. ANCHOR 10175 carries the "Popular" badge.

This group includes ANCHOR 10175, ANCHOR 10183 and DEA / MARMON RIDE CONTROL A42131 and the remaining parts above.

This table covers the Motor Mount kits. Read more

One part is listed for the 2021 Toyota C-HR — ANCHOR 300925.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

30 Oil parts are listed for the 2021 Toyota C-HR, from VALVOLINE, LIQUI MOLY, MOBIL and 2 other brands. LIQUI MOLY 22044 carries the "Popular" badge. They are grouped as Full Synthetic and High Mileage (>75,000 Miles), with Full Synthetic the largest group at 23 parts from LIQUI MOLY, VALVOLINE, MOBIL and 2 other brands.

This table covers the drain plugs in the oil pan. Read more

5 Oil Drain Plug parts are listed for the 2021 Toyota C-HR, from DORMAN, ACKOJA, BECK/ARNLEY and 1 other brand. DORMAN 090038 carries the "Popular" badge.

This group includes DORMAN 090038, ACKOJA A700114 and BECK/ARNLEY 0160116 and the remaining parts above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Oil Drain Plug Gasket parts for the 2021 Toyota C-HR come from 4 brands — AJUSA, DORMAN, FEL-PRO and 1 other brand.

This group includes AJUSA 22005800, DORMAN 095156 and FEL-PRO 70822 and the remaining parts above.

This table covers the caps on the oil filler neck. Read more

3 Oil Filler Cap parts are listed for the 2021 Toyota C-HR, from CALORSTAT, GATES and MOTORAD.

Part numbers include CALORSTAT OC2312, GATES 31285 and MOTORAD MO155.

This table covers the gaskets that seal the Oil Filler Cap. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: AJUSA 00519100.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

28 Oil Filter parts are listed for the 2021 Toyota C-HR, from FRAM, WIX, VARIOUS MFR and 12 other brands. PRO-TEC PXL51394 carries the "Popular" badge. Economy, High Performance / Heavy Duty and Standard Replacement are all represented, and Standard Replacement alone accounts for 14 parts.

This table covers the Oil Filter Adapter Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

This group shows a single part: FEL-PRO ES71858.

This table covers the oil pans that hold the engine's oil sump. Read more

5 Oil Pan parts for the 2021 Toyota C-HR come from 5 brands — AUTOTECNICA, DORMAN, REIN and 2 other brands. The "Popular" part is AUTOTECNICA TY1415247.

This group includes AUTOTECNICA TY1415247, DORMAN 264324 and REIN ESK0201 and the remaining parts above.

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Oil Pan Gasket parts are listed for the 2021 Toyota C-HR, from APEX, FEL-PRO and VICTOR REINZ.

Listed part numbers: APEX AOP881, FEL-PRO OS30829 and VICTOR REINZ 703141410.

This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

3 Oil Pump parts are listed for the 2021 Toyota C-HR, from MELLING, PIERBURG and TOPLINE.

Listed part numbers: MELLING M584, PIERBURG 706595110 and TOPLINE OPTO55A.

This table covers the chains that drive the oil pump. Read more

4 Oil Pump Chain parts for the 2021 Toyota C-HR come from 4 brands — S.A. GEAR, PREFERRED COMPONENTS INC, CLOYES and 1 other brand.

In the Chain Only grade, S.A. GEAR supplies 1 part: grouped under the catalog's "Chain Only" designation — the notes column spells out what sets them apart. A representative part number is S.A. GEAR RC1036.

The Economy section lists 1 option from PREFERRED COMPONENTS INC — the catalog's value-priced group. PREFERRED COMPONENTS INC C1001 is listed in this group.

In the Standard Replacement grade, CLOYES and MELLING supply 2 parts: built to original-equipment specification. A representative part number is CLOYES C751.

Listed part numbers: S.A. GEAR RC1036, PREFERRED COMPONENTS INC C1001 and CLOYES C751, plus the other parts above.

This table covers the Oil Pump Chain tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

2 Oil Pump Chain Tensioner parts are listed for the 2021 Toyota C-HR, from MELLING and PREFERRED COMPONENTS INC.

This group includes MELLING BT5936 and PREFERRED COMPONENTS INC T68005.

This table covers the Oil Pump Drive gears. Read more

This group shows a single part: PREFERRED COMPONENTS INC G56125.

This table covers the O-rings that seal the oil-pump pickup tube. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

One part is listed for the 2021 Toyota C-HR — FEL-PRO 73595.

This table covers the Oil Pump sprockets. Read more

3 Oil Pump Sprocket parts for the 2021 Toyota C-HR come from 3 brands — CLOYES, MELLING and S.A. GEAR.

Listed part numbers: CLOYES S923, plus the other parts above.

This table covers the Piston Pin bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

One part is listed for the 2021 Toyota C-HR — TOPLINE PBTO39.

This table covers the timing chains that keep the cams in time with the crank. Read more

2 Timing Chain parts for the 2021 Toyota C-HR come from 2 brands — CLOYES and S.A. GEAR.

Part numbers include CLOYES C579 and S.A. GEAR C1276.

This table covers kits that group a timing chain with the related tensioners and guides. Read more

3 Timing Chain & Component Kit parts are listed for the 2021 Toyota C-HR, from CLOYES and S.A. GEAR.

Economy: 1 part, from S.A. GEAR. A representative part number is S.A. GEAR 76494.

The Standard Replacement section: 2 options from CLOYES. CLOYES 90579S is listed in this group.

This group includes S.A. GEAR 76494, CLOYES 90579S and CLOYES 90579SX.

This table covers the guides and dampers that keep the timing chain on its path. Read more

5 Timing Chain Guide / Damper parts for the 2021 Toyota C-HR come from 2 brands — S.A. GEAR and CLOYES.

Part numbers include CLOYES 96321, CLOYES 96322 and S.A. GEAR 91489, among others listed above.

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

4 Timing Chain Tensioner parts are listed for the 2021 Toyota C-HR, from CLOYES, MELLING, PREFERRED COMPONENTS INC and 1 other brand.

Part numbers include CLOYES 95935, MELLING BT5935 and PREFERRED COMPONENTS INC T66225, among others listed above.

This table covers the Timing Chain Tensioner springs. Typical signs include a sagging corner, a broken coil, or a clunk from the spring pocket. Replace springs in axle pairs and inspect the seats. Read more

This group shows a single part: PREFERRED COMPONENTS INC T68004.

This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2021 Toyota C-HR — SKF 15355A.

This table covers the crankshaft sprockets that drive the timing chain or belt. Read more

5 Timing Crank Sprocket parts are listed for the 2021 Toyota C-HR, from S.A. GEAR, CLOYES and PREFERRED COMPONENTS INC. S.A. GEAR S1330 carries the "Popular" badge.

Listed part numbers: S.A. GEAR S1330, CLOYES S1097 and CLOYES S1225, plus the other parts above.

This table covers the Torque Strut mounts. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

2 Torque Strut Mount parts for the 2021 Toyota C-HR come from 2 brands — ANCHOR and DEA / MARMON RIDE CONTROL.

This group includes ANCHOR 10173 and DEA / MARMON RIDE CONTROL A42130.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Valve Cover Gasket parts are listed for the 2021 Toyota C-HR, from AJUSA, APEX, BECK/ARNLEY and 1 other brand.

This group includes AJUSA 56041000, APEX AVC881S and BECK/ARNLEY 0361937 and the remaining parts above.

This table covers the Valve Cover grommets. Read more

One part is listed for the 2021 Toyota C-HR — BECK/ARNLEY 0396605.

This table covers the pressed-in bronze and cast-iron guides that align valve stems. Typical signs include oil smoke on startup, a guide that has gone oval, or a valve that no longer seats quietly. Guides are a machine-shop fit. Confirm stem diameter in the notes before ordering. Read more

TOPLINE supplies both parts for the 2021 Toyota C-HR.

Listed part numbers: TOPLINE EVGTO55 and TOPLINE IVGTO55.

This table covers the lifters / tappets that transfer cam motion to the valves. Read more

2 Valve Lifter parts are listed for the 2021 Toyota C-HR, from AJUSA and TOPLINE.

Part numbers include AJUSA 85010900 and TOPLINE LIFTO55P.

This table covers the springs that close each intake and exhaust valve. Typical signs include a sagging corner, a broken coil, or a clunk from the spring pocket. Replace springs in axle pairs and inspect the seats. Read more

3 Valve Spring parts for the 2021 Toyota C-HR come from 2 brands — QUALCAST and MELLING.

This group includes MELLING VS2510, QUALCAST 325507 and QUALCAST 325508.

This table covers the Valve Spring retainers. Read more

This group shows a single part: MELLING VSR726.

This table covers the keepers that lock each valve-spring retainer to the stem. Read more

This group shows a single part: MELLING VL1100.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

4 Valve Stem Seal parts are listed for the 2021 Toyota C-HR, from AJUSA and TOPLINE.

This group includes AJUSA 12015500, AJUSA 12027000 and AJUSA 57053900 and the remaining parts above.

This table covers the Variable Valve Timing (VVT) Eccentric Shaft sensors. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors. Read more

This group shows a single part: VEMO V70870001.

This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

15 Variable Valve Timing (VVT) Solenoid / Actuator parts are listed for the 2021 Toyota C-HR, from ROSTRA, GATES, HOLSTEIN and 5 other brands. ROSTRA 790028 carries the "Popular" badge.

Economy: 8 parts, from ROSTRA, GATES, HOLSTEIN and 1 other brand. A representative part number is ROSTRA 790028.

The Standard Replacement section: 7 options from NTK, BECK/ARNLEY, CLOYES and 1 other brand. NTK VV0064 is listed in this group.

This table covers the cam phaser sprockets used by the variable-valve-timing system. Read more

One part is listed for the 2021 Toyota C-HR — STANDARD MOTOR PRODUCTS VVT850.