2021 Toyota Sequoia Suspension Parts

This table covers the Air compressors. Typical signs include no cold air, rapid clutch cycling, or a growl when the clutch engages. Replace the drier and evacuate the system whenever the circuit is opened. Read more

3 Air Compressor parts for the 2021 Toyota Sequoia come from 2 brands — ARNOTT and WESTAR.

Part numbers include ARNOTT P3789, ARNOTT P3189 and WESTAR CD7767.

This table covers the air springs that carry vehicle weight in place of a conventional coil. Read more

3 Air Spring parts for the 2021 Toyota Sequoia come from 2 brands — ARNOTT and VEMO.

This group includes ARNOTT A3615, ARNOTT A3616 and VEMO V70500001.

This table covers the Air Suspension Solenoid valves. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

This group shows a single part: ARNOTT VB3790.

This table covers the cam bolts and plates used to set camber at the knuckle. Typical signs include warpage, cracks, or a plate that no longer locates the assembly. Confirm which plate the notes describe — backing plates, clutch plates and strike plates are different parts. Read more

4 Alignment Bolt / Camber Plate parts for the 2021 Toyota Sequoia come from 4 brands — DELPHI, MOOG, SKP and 1 other brand.

In the Daily Driver grade, DELPHI and MOOG supply 2 parts: grouped for everyday commuting duty. A representative part number is DELPHI TAL10012.

The Economy section lists 2 options from SKP and ULTRA-POWER — the catalog's value-priced group. SKP SK100381 is listed in this group.

Listed part numbers: DELPHI TAL10012, MOOG K100381 and SKP SK100381, plus the other parts above.

This table covers the ball joints that articulate each control arm at the knuckle. Read more

17 Ball Joint parts for the 2021 Toyota Sequoia come from 8 brands — DORMAN, DELPHI, MOOG and 5 other brands. The "Popular" part is DELPHI TC7761.

Daily Driver: 10 parts, from DORMAN, DELPHI, MOOG and 2 other brands. A representative part number is DELPHI TC7761.

The Economy section: 7 options from QUICK STEER, BECK/ARNLEY, FVP and 1 other brand. QUICK STEER K500018 is listed in this group.

This table covers the control arms that locate each hub relative to the chassis. Typical signs include clunks over bumps, a wander on the highway, or inner-edge tire wear. Get an alignment after any control-arm work, and inspect the ball joint and bushings that came with the arm. Read more

37 Control Arm parts for the 2021 Toyota Sequoia come from 9 brands — MEVOTECH, BECK/ARNLEY, MOOG and 6 other brands. The "Popular" part is MEVOTECH CMS86134. Grades run from Daily Driver through Economy; Economy is the most populated section, led by MEVOTECH, BECK/ARNLEY, QUICK STEER and 1 other brand.

This table covers the bushings pressed into each control arm. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

16 Control Arm Bushing parts for the 2021 Toyota Sequoia come from 5 brands — MEVOTECH, MOOG, TRW and 2 other brands. The "Popular" part is MEVOTECH MS864102.

Daily Driver: 11 parts, from MEVOTECH, MOOG, TRW and 1 other brand. A representative part number is MEVOTECH MS864102.

The Economy section: 5 options from MEVOTECH and DORMAN. DORMAN 533856 is listed in this group.

This table covers the Leveling kits. Read more

One part is listed for the 2021 Toyota Sequoia — BILSTEIN 47310971.

This table covers the Ride Height sensors. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors. Read more

7 Ride Height Sensor parts for the 2021 Toyota Sequoia come from 3 brands — ARNOTT, WELLS and MONROE. The "Popular" part is ARNOTT RH3768.

Part numbers include ARNOTT RH3768, ARNOTT RH3769 and ARNOTT RH3791, among others listed above.

This table covers the shocks and struts that damp wheel motion. Typical signs include a nose that keeps bouncing, cupped tires, or fluid weeping down the body. Replace shocks or struts in axle pairs and renew the mounts if they are torn or collapsed. Read more

20 Shock / Strut parts for the 2021 Toyota Sequoia come from 9 brands — ULTRA-POWER, MONROE, BILSTEIN and 6 other brands. The "Popular" part is BILSTEIN 33187266.

The Economy section: 8 options from ULTRA-POWER, PRT, FAMOUS BRAND and 1 other brand. FAMOUS BRAND 2701423382 is listed in this group.

In the Increased Handling/Stability grade, BILSTEIN supplies 3 parts: grouped under the catalog's "Increased Handling/Stability" designation — the notes column spells out what sets them apart. A representative part number is BILSTEIN 33187266.

The Original Ride Quality section lists 9 options from KYB, FCS, MONROE and 2 other brands — grouped under the catalog's "Original Ride Quality" designation — the notes column spells out what sets them apart. FCS 342950 is listed in this group.

This table covers complete strut assemblies with the spring already installed. Read more

19 Shock / Strut & Coil Spring Assembly parts for the 2021 Toyota Sequoia come from 7 brands — PRT, FCS, MONROE and 4 other brands. The "Popular" part is PRT 710797.

The Economy section: 5 options from PRT and FAMOUS BRAND. PRT 710797 is listed in this group.

The Original Ride Quality section: 14 options from FCS, MONROE, ARNOTT and 2 other brands. FCS 1345849L is listed in this group.

This table covers the upper mounts (and bearings) a strut bolts through at the tower. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

5 Shock / Strut Mount parts are listed for the 2021 Toyota Sequoia, from KYB, GABRIEL, MONROE and 2 other brands. KYB SM5737 carries the "Popular" badge.

The Daily Driver section: 4 options from KYB, GABRIEL, MONROE and 1 other brand. KYB SM5737 is listed in this group.

Economy: 1 part, from DEA / MARMON RIDE CONTROL. A representative part number is DEA / MARMON RIDE CONTROL 4714146.

Part numbers include KYB SM5737, GABRIEL 143340 and MONROE 907923, among others listed above.

This table covers the Suspension Conversion kits. Read more

This group shows a single part: ARNOTT C3793.

This table covers the bushings that clamp the anti-roll bar to the chassis. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

12 Sway Bar Bushing parts for the 2021 Toyota Sequoia come from 9 brands — DELPHI, MOOG, MEVOTECH and 6 other brands. The "Popular" part is DELPHI TD1963W.

Daily Driver: 7 parts, from DELPHI, MOOG, ACDELCO and 2 other brands. A representative part number is DELPHI TD1963W.

The Economy section: 5 options from SKP, BECK/ARNLEY, DORMAN and 2 other brands. SKP SK90526 is listed in this group.

This table covers the links that connect the anti-roll bar to each control arm or strut. Typical signs include a clunk on one wheel over a driveway, or a rattle that goes away when you lean on the bar. Replace links in pairs; a seized stud often takes the bushing with it. Read more

37 Sway Bar Link parts for the 2021 Toyota Sequoia come from 11 brands — MEVOTECH, ACDELCO, DORMAN and 8 other brands. The "Popular" part is MEVOTECH MS86822. Daily Driver, Economy and Premium are all represented, and Daily Driver alone accounts for 26 parts.