This page lists 17 engine parts for the 1967 Triumph Spitfire, across 7 part types, covering both the 1.2L L4 and the 1.3L L4. Every part shows its brand, manufacturer part number and fitment notes.
On the 1967 Triumph Spitfire, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. Most of the listed parts are Piston Ring (4 parts), Intake & Exhaust Manifold Gasket Set (3 parts) and Oil Pan Gasket (3 parts). The other 4 part types cover the remaining 7 parts.
The 1967 Triumph Spitfire was sold with both the 1.2L L4 and the 1.3L L4. Every part on this page is engine-specific. Each part shows which engine(s) it fits.
8 brands supply engine parts for the 1967 Triumph Spitfire, led by HASTINGS MANUFACTURING (4 parts), FEL-PRO (3 parts) and VICTOR REINZ (3 parts), plus 5 more brands. Quality grades include Economy and Standard Replacement.
Each part number listed for the 1967 Triumph Spitfire opens a page with every vehicle that part fits.
Intake & Exhaust Manifold Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Fits: 1.3L L4 | MS22692 | 🇺🇸 US | View on Amazon | |
| MAHLE / CLEVITE Fits: 1.3L L4 | MS15235 | 🇺🇸 US | Perforated Steel | View on Amazon |
| VICTOR REINZ Fits: 1.3L L4 | 711500100 | 🇺🇸 US | View on Amazon |
This table covers the Intake & Exhaust Manifold gasket sets. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
3 Intake & Exhaust Manifold Gasket Set parts are listed for the 1967 Triumph Spitfire, from FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.
Listed part numbers: FEL-PRO MS22692, MAHLE / CLEVITE MS15235 and VICTOR REINZ 711500100.
Oil Filter
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FRAM Fits: 1.3L L4 | FE16 | 🇺🇸 US 🇨🇦 CA | Spin-OnTough Guard or Synthetic Endurance | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACDELCO Fits: 1.3L L4 | PF53 | 🇺🇸 US 🇨🇦 CA | Gold / Professional or Gold / Professional DurapackSpin-On | View on Amazon |
This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.
2 Oil Filter parts for the 1967 Triumph Spitfire come from 2 brands — FRAM and ACDELCO.
The Economy section lists 1 option from FRAM — the catalog's value-priced group. FRAM FE16 is listed in this group.
In the Standard Replacement grade, ACDELCO supplies 1 part: built to original-equipment specification. A representative part number is ACDELCO PF53.
Part numbers include FRAM FE16 and ACDELCO PF53.
Oil Pan Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Fits: 1.3L L4 | OS21564C | 🇺🇸 US | View on Amazon | |
| MAHLE / CLEVITE Fits: 1.3L L4 | OS20064 | 🇺🇸 US | Cork-Rubber | View on Amazon |
| VICTOR REINZ Fits: 1.3L L4 | 711668000 | 🇺🇸 US | View on Amazon |
This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
3 Oil Pan Gasket parts for the 1967 Triumph Spitfire come from 3 brands — FEL-PRO, MAHLE / CLEVITE and VICTOR REINZ.
Part numbers include FEL-PRO OS21564C, MAHLE / CLEVITE OS20064 and VICTOR REINZ 711668000.
Piston Ring
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| HASTINGS MANUFACTURING Fits: 1.3L L4 | 6840 | 🇺🇸 US | Full SetPlain Cast Top Ring | View on Amazon |
| HASTINGS MANUFACTURING Fits: 1.3L L4 | 2C6840 | 🇺🇸 US | Full SetTop Groove: 1/16 In | View on Amazon |
| HASTINGS MANUFACTURING Fits: 1.3L L4 | 2C6840S | 🇺🇸 US | Chrome Top Ring1 Cylinder Set | View on Amazon |
| HASTINGS MANUFACTURING Fits: 1.3L L4 | 6840S | 🇺🇸 US | 1 Cylinder SetFor 2 Ring Piston | View on Amazon |
This table covers the rings that seal each piston to the cylinder wall.
HASTINGS MANUFACTURING supplies the 4 Piston Ring parts for the 1967 Triumph Spitfire.
Part numbers include HASTINGS MANUFACTURING 6840, HASTINGS MANUFACTURING 2C6840 and HASTINGS MANUFACTURING 2C6840S, among others listed above.
Timing Belt Pulley
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BECK/ARNLEY Fits: 1.3L L4 | 0513860 | 🇺🇸 US | Bearing Only | View on Amazon |
| BECK/ARNLEY Fits: 1.3L L4 | 0513954 | 🇺🇸 US | Bearing Only | View on Amazon |
This table covers the Timing Belt pulleys. Typical signs include a growl or chirp that follows engine speed, or a pulley that will not spin freely by hand. Spin each pulley with the belt off. Roughness or play means replace it with the belt.
2 Timing Belt Pulley parts for the 1967 Triumph Spitfire come from BECK/ARNLEY.
Listed part numbers: BECK/ARNLEY 0513860 and BECK/ARNLEY 0513954.
Timing Chain
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Fits: 1.3L L4 | 94013 | 🇺🇸 US | CenterChain Rows: 1 | View on Amazon |
This table covers the timing chains that keep the cams in time with the crank.
One part is listed for the 1967 Triumph Spitfire — CLOYES 94013.
Valve Cover Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Fits: 1.3L L4 | VS21565 | 🇺🇸 US | View on Amazon | |
| VICTOR REINZ Fits: 1.3L L4 | 151043801 | 🇺🇸 US | Set | View on Amazon |
This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
2 Valve Cover Gasket parts for the 1967 Triumph Spitfire come from 2 brands — FEL-PRO and VICTOR REINZ.
This group includes FEL-PRO VS21565 and VICTOR REINZ 151043801.
Buying Engine Parts for a 1967 Triumph Spitfire
On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.
- Match the engine first. Every engine part here is engine-specific; each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Piston Ring and Intake & Exhaust Manifold Gasket Set .
Frequently Asked Questions
How many engine parts fit the 1967 Triumph Spitfire?
Our catalog currently lists 17 engine parts for the 1967 Triumph Spitfire across 7 subcategories and 8 brands, covering both the 1.2L L4 and the 1.3L L4. Each part is matched to the engine(s) it fits.
Do engine parts differ between 1967 Triumph Spitfire engines?
Yes. Every engine part on this page is engine-specific. Each row shows which engine(s) it fits — use the filter at the top to hide the rest. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of engine problems on a 1967 Triumph Spitfire?
Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1967 Triumph Spitfire was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 1967 Triumph Spitfire?
First match the engine — each row shows which engine(s) the part fits. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 1967 Triumph Spitfire
Engine Parts for Other Triumph Spitfire Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.