The 1980 Triumph TR8 has 26 drivetrain parts with verified fitment on this page — 5 part types and 11 brands, covering the 3.5L V8 engine. Each part includes a manufacturer part number and application notes.
On the 1980 Triumph TR8, the drivetrain system moves power from transmission to wheels through axles, CV joints, driveshafts, differentials and wheel-end hardware. Most of the listed parts are Differential Pinion Bearing / Race (9 parts), Differential Carrier Bearing / Race (6 parts) and Universal Joint (6 parts). The other 2 part types cover the remaining 5 parts.
Every part on this page is matched to the 3.5L V8 — the only engine offered in the 1980 Triumph TR8.
The most listed brands for 1980 Triumph TR8 drivetrain parts are TIMKEN (6 parts), WJB / INMOTION PARTS (5 parts) and BCA (4 parts), plus 8 more brands. Quality grades include Standard Replacement and Economy.
6 parts on this 1980 Triumph TR8 page carry a "Popular" badge — the source catalog's flag for options frequently chosen for this vehicle — including TIMKEN SET16 (Differential Carrier Bearing / Race) and WJB / INMOTION PARTS WTHM88649 (Differential Pinion Bearing / Race). Click any part number to see every vehicle that part fits.
Differential Carrier Bearing / Race
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WJB / INMOTION PARTS | WTA13 | 🇺🇸 US 🇨🇦 CA | Bearing & Race Set | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| TIMKEN Popular | SET16 | 🇺🇸 US 🇨🇦 CA | Bearing & Race Set | View on Amazon |
| TIMKEN Popular | SET13 | 🇺🇸 US 🇨🇦 CA | Bearing & Race Set | View on Amazon |
| BCA | NBA13 | 🇺🇸 US 🇨🇦 CA | Bearing & Race SetIncludes Cup and Cone | View on Amazon |
| NSK | TRB13 | 🇺🇸 US 🇨🇦 CA | Bearing & Race SetKit Contents: 1 Cup, 1 Cone | View on Amazon |
| NSK | L68149 | 🇺🇸 US 🇨🇦 CA | Inside Diameter: 35 MMWidth, Outer Race: 16.76 mm | View on Amazon |
This table covers the bearings and races that support the differential carrier.
6 Differential Carrier Bearing / Race parts for the 1980 Triumph TR8 come from 4 brands — TIMKEN, NSK, WJB / INMOTION PARTS and 1 other brand. The "Popular" part is TIMKEN SET16.
The Economy section lists 1 option from WJB / INMOTION PARTS — the catalog's value-priced group. WJB / INMOTION PARTS WTA13 is listed in this group.
In the Standard Replacement grade, TIMKEN, NSK and BCA supply 5 parts: built to original-equipment specification. A representative part number is TIMKEN SET16.
This group includes TIMKEN SET16, WJB / INMOTION PARTS WTA13 and TIMKEN SET13 and the remaining parts above.
Differential Pinion Bearing / Race
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WJB / INMOTION PARTS Popular | WTHM88649 | 🇺🇸 US 🇨🇦 CA | Rear Outerwith Standard CM Axle | View on Amazon |
| AUTO EXTRA | M84548 | 🇺🇸 US 🇨🇦 CA | RearOuter | View on Amazon |
| FAMOUS BRAND | SHM88610 | 🇺🇸 US 🇨🇦 CA | RearOuter | View on Amazon |
| WJB / INMOTION PARTS | WTHM88610 | 🇺🇸 US 🇨🇦 CA | Cup Outside Diameter (In): 2.8439999999999999 InRace | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| TIMKEN Popular | M88010 | 🇺🇸 US 🇨🇦 CA | Race | View on Amazon |
| BCA | NBHM88610 | 🇺🇸 US 🇨🇦 CA | Race | View on Amazon |
| BCA | NBHM88649 | 🇺🇸 US 🇨🇦 CA | Bearing Shape: Cylindrical | View on Amazon |
| TIMKEN | M88046 | 🇺🇸 US 🇨🇦 CA | Rear Outer | View on Amazon |
| TIMKEN | M88040 | 🇺🇸 US 🇨🇦 CA | Rear Inner | View on Amazon |
This table covers the bearings and races on the differential pinion.
9 Differential Pinion Bearing / Race parts are listed for the 1980 Triumph TR8, from TIMKEN, WJB / INMOTION PARTS, BCA and 2 other brands. WJB / INMOTION PARTS WTHM88649 carries the "Popular" badge.
Economy: 4 parts, from WJB / INMOTION PARTS, AUTO EXTRA and FAMOUS BRAND. A representative part number is WJB / INMOTION PARTS WTHM88649.
The Standard Replacement section: 5 options from TIMKEN and BCA. TIMKEN M88010 is listed in this group.
Part numbers include WJB / INMOTION PARTS WTHM88649, AUTO EXTRA M84548 and FAMOUS BRAND SHM88610, among others listed above.
Differential Pinion Repair Sleeve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WJB / INMOTION PARTS | WS99114 | 🇺🇸 US 🇨🇦 CA | Rear Outerwith Standard CM Axle | View on Amazon |
This table covers the wear sleeves used to restore a grooved pinion seal surface.
This group shows a single part: WJB / INMOTION PARTS WS99114.
Differential Pinion Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BCA | NS223020 | 🇺🇸 US 🇨🇦 CA | Rear Outerwith Standard CM Axle(s) | View on Amazon |
| SCHAEFFLER | SS2283 | 🇺🇸 US 🇨🇦 CA | Rear1.85" I:D X 1.86" O.D. X 0.28" Width | View on Amazon |
| TIMKEN | 223020 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
| WJB / INMOTION PARTS | WS223020 | 🇺🇸 US 🇨🇦 CA | Rear Outerwith Standard CM Axle | View on Amazon |
This table covers the seals at the differential pinion yoke. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
4 Differential Pinion Seal parts for the 1980 Triumph TR8 come from 4 brands — BCA, SCHAEFFLER, TIMKEN and 1 other brand.
Part numbers include BCA NS223020, SCHAEFFLER SS2283 and TIMKEN 223020, among others listed above.
Universal Joint
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DANA | 25101X | 🇺🇸 US 🇨🇦 CA | Spicer SelectNon-Greasable | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GMB Popular | 2200500 | 🇺🇸 US 🇨🇦 CA | GreasableGrease Fitting in Cross | View on Amazon |
| MOOG Popular | 341 | 🇺🇸 US 🇨🇦 CA | Fits Rear Driveshaft at Rear AxleExcept Short Grease Fitting | View on Amazon |
| DANA | 5101X | 🇺🇸 US 🇨🇦 CA | SpicerNon-Greasable | View on Amazon |
| GMB | 2200600 | 🇺🇸 US 🇨🇦 CA | GreasableGrease Fitting in Bearing Cap | View on Amazon |
| SKF | UJ341 | 🇺🇸 US 🇨🇦 CA | Greaseable | View on Amazon |
This table covers the U-joints in the driveshaft.
6 Universal Joint parts for the 1980 Triumph TR8 come from 4 brands — DANA, GMB, MOOG and 1 other brand. The "Popular" part is GMB 2200500.
The Economy section: 1 option from DANA. DANA 25101X is listed in this group.
Standard Replacement: 5 parts, from GMB, MOOG, DANA and 1 other brand. A representative part number is GMB 2200500.
Part numbers include GMB 2200500, DANA 25101X and MOOG 341, among others listed above.
Buying Drivetrain Parts for a 1980 Triumph TR8
On this vehicle, the drivetrain system moves power from transmission to wheels through axles, CV joints, driveshafts, differentials and wheel-end hardware.
- Confirm you have the 3.5L V8 engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the differential or transfer-case fluid with any axle or seal job while everything is already open.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Differential Pinion Bearing / Race and Differential Carrier Bearing / Race .
Frequently Asked Questions
How many drivetrain parts fit the 1980 Triumph TR8?
Our catalog currently lists 26 drivetrain parts for the 1980 Triumph TR8 across 5 subcategories and 11 brands, covering the 3.5L V8 engine. Each part is matched to the engine(s) it fits.
What are the signs of drivetrain problems on a 1980 Triumph TR8?
Common symptoms include clicking in tight turns, a clunk when shifting between drive and reverse, vibration that builds with speed, or gear oil on the inside of a wheel. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the differential or transfer-case fluid with any axle or seal job while everything is already open.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1980 Triumph TR8 was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 1980 Triumph TR8?
Every part on this page is matched to the 3.5L V8 engine. Then a torn CV boot caught early is a cheap boot kit; caught late it is a whole axle — inspect before deciding which to buy. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 1980 Triumph TR8
Drivetrain Parts for Other Triumph TR8 Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.