1982 Triumph TR8 Drivetrain Parts

Engine:
3.5L V8

10 Drivetrain parts are listed for the 1982 Triumph TR8, in 4 part types, covering the 3.5L V8 engine. Each one has a brand, a manufacturer part number and notes that say where it fits.

On the 1982 Triumph TR8, the drivetrain system moves power from transmission to wheels through axles, CV joints, driveshafts, differentials and wheel-end hardware. Most of the listed parts are Differential Pinion Bearing / Race (4 parts), Differential Pinion Seal (3 parts) and Differential Carrier Bearing / Race (2 parts). The other 1 part type covers the remaining 1 part.

Differential Carrier Bearing / Race

Economy

Brand Part Number Markets Notes Buy
WJB / INMOTION PARTS WTA13
🇨🇦 CA
Bearing & Race Set
Fitment notes — WJB / INMOTION PARTS WTA13
Bearing & Race Set
Rearwith Standard CM Axle
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
BCA NBA13
🇨🇦 CA
Bearing & Race SetIncludes Cup and Cone
Fitment notes — BCA NBA13
Bearing & Race SetIncludes Cup and Cone
Rearwith Standard CM Axle(s)
View on
Amazon

This table covers the bearings and races that support the differential carrier.

Differential Pinion Bearing / Race

Economy

Brand Part Number Markets Notes Buy
WJB / INMOTION PARTS WTHM88610
🇨🇦 CA
Cup Outside Diameter (In): 2.8439999999999999 InRace
Fitment notes — WJB / INMOTION PARTS WTHM88610
Cup Outside Diameter (In): 2.8439999999999999 InRace
Rear Outerwith Standard CM Axle
View on
Amazon
WJB / INMOTION PARTS WTHM88649
🇨🇦 CA
Rear Outerwith Standard CM Axle
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
BCA NBHM88610
🇨🇦 CA
Race
Fitment notes — BCA NBHM88610
Race
Rear Outerwith Standard CM Axle(s)
View on
Amazon
BCA NBHM88649
🇨🇦 CA
Bearing Shape: Cylindrical
Fitment notes — BCA NBHM88649
Bearing Shape: Cylindrical
Rear Outerwith Standard CM Axle(s)
View on
Amazon

This table covers the bearings and races on the differential pinion.

Differential Pinion Repair Sleeve

Brand Part Number Markets Notes Buy
WJB / INMOTION PARTS WS99114
🇨🇦 CA
Rear Outerwith Standard CM Axle
View on
Amazon

This table covers the wear sleeves used to restore a grooved pinion seal surface.

Differential Pinion Seal

Brand Part Number Markets Notes Buy
BCA NS223020
🇨🇦 CA
Rear Outerwith Standard CM Axle(s)
View on
Amazon
SCHAEFFLER SS2283
🇨🇦 CA
Rear1.85" I:D X 1.86" O.D. X 0.28" Width
View on
Amazon
WJB / INMOTION PARTS WS223020
🇨🇦 CA
Rear Outerwith Standard CM Axle
View on
Amazon

This table covers the seals at the differential pinion yoke. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Buying Drivetrain Parts for a 1982 Triumph TR8

On this vehicle, the drivetrain system moves power from transmission to wheels through axles, CV joints, driveshafts, differentials and wheel-end hardware.

  • Confirm you have the 3.5L V8 engine — every part on this page is matched to it.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace the differential or transfer-case fluid with any axle or seal job while everything is already open.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Differential Pinion Bearing / Race and Differential Pinion Seal .

Frequently Asked Questions

How many drivetrain parts fit the 1982 Triumph TR8?

Our catalog currently lists 10 drivetrain parts for the 1982 Triumph TR8 across 4 subcategories and 3 brands, covering the 3.5L V8 engine. Each part is matched to the engine(s) it fits.

What are the signs of drivetrain problems on a 1982 Triumph TR8?

Common symptoms include clicking in tight turns, a clunk when shifting between drive and reverse, vibration that builds with speed, or gear oil on the inside of a wheel. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What should I replace at the same time?

Where labor overlaps, replace the differential or transfer-case fluid with any axle or seal job while everything is already open.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1982 Triumph TR8 was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 1982 Triumph TR8?

Every part on this page is matched to the 3.5L V8 engine. Then a torn CV boot caught early is a cheap boot kit; caught late it is a whole axle — inspect before deciding which to buy. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 1982 Triumph TR8

Drivetrain Parts for Other Triumph TR8 Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.