1990 Utilimaster Step Van Engine Parts

Engine:
2.5L

This page lists 14 engine parts for the 1990 Utilimaster Step Van, across 11 part types, covering the 2.5L engine. Every part shows its brand, manufacturer part number and fitment notes.

On the 1990 Utilimaster Step Van, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. 6 parts of the 14 listed are Crankshaft Seal (3 parts), Oil Filter (2 parts) and Camshaft Plug (1 part). The other 8 part types cover the remaining 8 parts.

Camshaft Plug

Brand Part Number Markets Notes Buy
FEL-PRO TCS45833
🇺🇸 US 🇨🇦 CA
Rear
View on
Amazon

This table covers the Camshaft plugs. Typical signs include a leak at the drain or glow-plug hole, or a plug that has rounded off. Replace the crush washer and torque to the spec in the notes.

Camshaft Seal

Brand Part Number Markets Notes Buy
FEL-PRO TCS45495
🇺🇸 US 🇨🇦 CA
Kit
Fitment notes — FEL-PRO TCS45495
Kit
Front
View on
Amazon

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Crankshaft Seal

Brand Part Number Markets Notes Buy
FEL-PRO BS401681
🇺🇸 US 🇨🇦 CA
Rubber
Fitment notes — FEL-PRO BS401681
Rubber
Rear1 Piece
View on
Amazon
FEL-PRO TCS45131
🇺🇸 US 🇨🇦 CA
Front
View on
Amazon
FEL-PRO BS40627
🇺🇸 US 🇨🇦 CA
PTFE RubberIncludes Sleeve
Fitment notes — FEL-PRO BS40627
PTFE RubberIncludes Sleeve
Rear1 Piece
View on
Amazon

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.

Cylinder Head Bolt Washer

Brand Part Number Markets Notes Buy
FEL-PRO ES72176
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the Cylinder Head Bolt washers.

Cylinder Head Gasket

Brand Part Number Markets Notes Buy
FEL-PRO 9296PT
🇺🇸 US 🇨🇦 CA
Permatorque
View on
Amazon

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Cylinder Head Gasket Set

Brand Part Number Markets Notes Buy
FEL-PRO HS9296PT1
🇺🇸 US 🇨🇦 CA
Camshaft Rear Seal Not IncludedIncludes Permadry Molded Rubber Valve Cover Gasket(s), Valve Stem Seals
View on
Amazon

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Intake & Exhaust Manifold Gasket Set

Brand Part Number Markets Notes Buy
FEL-PRO MS90947
🇺🇸 US 🇨🇦 CA
View on
Amazon

This table covers the Intake & Exhaust Manifold gasket sets. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.

Oil Drain Plug Gasket

Brand Part Number Markets Notes Buy
FEL-PRO 70822
🇺🇸 US 🇨🇦 CA
0.500 (in) Inside Diameter x 0.900 (in) Outside DiameterFlat Washer
Fitment notes — FEL-PRO 70822
0.500 (in) Inside Diameter x 0.900 (in) Outside DiameterFlat WasherPlastic
View on
Amazon

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Oil Filter

Economy

Brand Part Number Markets Notes Buy
VARIOUS MFR PG4670
🇺🇸 US 🇨🇦 CA
Spin-On
View on
Amazon

Standard Replacement

Brand Part Number Markets Notes Buy
VARIOUS MFR PG4670EX
🇺🇸 US 🇨🇦 CA
Extended LifeSpin-On
View on
Amazon

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.

Oil Pan Gasket

Brand Part Number Markets Notes Buy
FEL-PRO OS30612R
🇺🇸 US 🇨🇦 CA
Permadry
View on
Amazon

This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Valve Cover Gasket

Brand Part Number Markets Notes Buy
FEL-PRO VS50334R
🇺🇸 US 🇨🇦 CA
Permadry Molded Rubber
View on
Amazon

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.

Buying Engine Parts for a 1990 Utilimaster Step Van

On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.

  • Confirm you have the 2.5L engine — every part on this page is matched to it.
  • Read the notes on each row for position, trim and spec qualifiers before you order.
  • Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
  • Cross-reference the manufacturer part number against your old part or a service-manual listing.

Start with the largest groups on this page: Crankshaft Seal and Oil Filter .

Frequently Asked Questions

How many engine parts fit the 1990 Utilimaster Step Van?

Our catalog currently lists 14 engine parts for the 1990 Utilimaster Step Van across 11 subcategories and 2 brands, covering the 2.5L engine. Each part is matched to the engine(s) it fits.

What are the signs of engine problems on a 1990 Utilimaster Step Van?

Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.

What should I replace at the same time?

Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.

What do the market flags (US, CA, MX) on each part mean?

They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1990 Utilimaster Step Van was originally sold in the US, the safest choice is a part marked for the US market.

How do I make sure a part fits my 1990 Utilimaster Step Van?

Every part on this page is matched to the 2.5L engine. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.

Other Parts for the 1990 Utilimaster Step Van

Engine Parts for Other Utilimaster Step Van Years

Switch vehicle or jump to a subcategory

Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.