This page lists 9 ignition parts for the 1992 Utilimaster Step Van, across 2 part types, covering both the 2.5L and the 3.3L. Every part shows its brand, manufacturer part number and fitment notes.
On the 1992 Utilimaster Step Van, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules. All 9 listed parts are Spark Plug (8 parts) and Distributor Mounting Gasket (1 part).
The 1992 Utilimaster Step Van was sold with both the 2.5L and the 3.3L. Every part on this page is engine-specific. Each part shows which engine(s) it fits.
3 brands supply ignition parts for the 1992 Utilimaster Step Van, led by CHAMPION (7 parts), FEL-PRO (1 part) and ACDELCO (1 part). Quality grades include Copper / Nickel, Double Platinum and Platinum.
A "Popular" badge means the source catalog flagged the part as frequently chosen for the 1992 Utilimaster Step Van. 1 part has it: CHAMPION 404 (Spark Plug). Each part number opens a page with every vehicle that part fits.
Distributor Mounting Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Fits: 2.5L | 70799 | 🇺🇸 US | O-Ring Type | View on Amazon |
This table covers the gaskets that seal the Distributor Mounting. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
One part is listed for the 1992 Utilimaster Step Van — FEL-PRO 70799.
Spark Plug
Summary: Notes include pre-set gaps of 0.032", 0.033", 0.035", 0.049" and 0.050". Replacement brands in this table include CHAMPION and ACDELCO.
Copper / Nickel
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CHAMPION Popular Fits: 2.5L | 404 | 🇺🇸 US | Copper PlusPre-Set Gap: 0.035" | View on Amazon |
| CHAMPION Fits: 2.5L | 4041 | 🇺🇸 US | Copper PlusClassification: Champion Copper Plus | View on Amazon |
| CHAMPION Fits: 3.3L | 31 | 🇺🇸 US | Copper PlusPre-Set Gap: 0.05" | View on Amazon |
Double Platinum (lasts up to 3x longer than Copper / Nickel)
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACDELCO Fits: 2.5L | 41828 | 🇺🇸 US 🇨🇦 CA | ProfessionalDouble Platinum | View on Amazon |
| CHAMPION Fits: 2.5L | 7322 | 🇺🇸 US | Double Platinum PowerPre-Set Gap: 0.032" | View on Amazon |
| CHAMPION Fits: 3.3L | 7031 | 🇺🇸 US | Double Platinum PowerPre-Set Gap: 0.049" | View on Amazon |
Platinum (lasts up to 2x longer than Copper / Nickel)
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CHAMPION Fits: 2.5L | 3405 | 🇺🇸 US | Platinum PowerPlug Type: RN14PMC | View on Amazon |
| CHAMPION Fits: 3.3L | 3031 | 🇺🇸 US | Platinum PowerPre-Set Gap: 0.05" | View on Amazon |
This table covers the spark plugs for this engine. Typical signs include misfire under load, rough idle, or a flashing check-engine light. Verify the gap even on pre-gapped plugs, and replace coil boots that come off a high-mileage engine.
8 Spark Plug parts are listed for the 1992 Utilimaster Step Van, from CHAMPION and ACDELCO. CHAMPION 404 carries the "Popular" badge.
In the Copper / Nickel grade, CHAMPION supplies 3 parts: grouped under the catalog's "Copper / Nickel" designation — the notes column spells out what sets them apart. A representative part number is CHAMPION 404.
In the Double Platinum (lasts up to 3x longer than Copper / Nickel) grade, CHAMPION and ACDELCO supply 3 parts: grouped under the catalog's "Double Platinum (lasts up to 3x longer than Copper / Nickel)" designation — the notes column spells out what sets them apart. A representative part number is ACDELCO 41828.
In the Platinum (lasts up to 2x longer than Copper / Nickel) grade, CHAMPION supplies 2 parts: grouped under the catalog's "Platinum (lasts up to 2x longer than Copper / Nickel)" designation — the notes column spells out what sets them apart. A representative part number is CHAMPION 3405.
Part numbers include CHAMPION 404, CHAMPION 4041 and CHAMPION 31, among others listed above.
Buying Ignition Parts for a 1992 Utilimaster Step Van
On this vehicle, the ignition system delivers spark at the right moment — plugs, coils, wires, distributors and ignition modules.
- Match the engine first. Every ignition part here is engine-specific; each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Spark Plug and Distributor Mounting Gasket .
Frequently Asked Questions
How many ignition parts fit the 1992 Utilimaster Step Van?
Our catalog currently lists 9 ignition parts for the 1992 Utilimaster Step Van across 2 subcategories and 3 brands, covering both the 2.5L and the 3.3L. Each part is matched to the engine(s) it fits.
Do ignition parts differ between 1992 Utilimaster Step Van engines?
Yes. Every ignition part on this page is engine-specific. Each row shows which engine(s) it fits — use the filter at the top to hide the rest. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of ignition problems on a 1992 Utilimaster Step Van?
Common symptoms include misfires under load, rough idle, flashing check-engine light, or poor starting in damp weather. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What spark-plug gap is listed for the 1992 Utilimaster Step Van?
Notes on this page include pre-set gaps of 0.032", 0.033", 0.035", 0.049" and 0.050". Still verify against spec — even “pre-gapped” plugs should be checked before they go in.
What should I replace at the same time?
Where labor overlaps, replace plugs and wires (or coil boots) as a set — one weak cylinder makes the whole set feel bad.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 1992 Utilimaster Step Van was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 1992 Utilimaster Step Van?
First match the engine — each row shows which engine(s) the part fits. Then gap matters even on “pre-gapped” plugs — verify against spec, and replace coil boots when they come off a high-mileage engine. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 1992 Utilimaster Step Van
Ignition Parts for Other Utilimaster Step Van Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.