2000 Acura Integra Steering Parts

This table covers the O-rings that seal this joint. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

One part is listed for the 2000 Acura Integra — JAPANESE OE KF811344.

This table covers the fluids specified for this steering system. Typical signs include discolored fluid, a burnt smell, or a level that keeps dropping. Use only the specification in the notes — the tables group grades because they are not interchangeable. Read more

4 Power Steering Fluid parts are listed for the 2000 Acura Integra, from LUBEGARD, EDELMANN and PRESTONE.

This group includes EDELMANN 70695, LUBEGARD 24201 and LUBEGARD 24242 and the remaining parts above.

This table covers the Power Steering Hose O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

2 Power Steering Hose O-Ring parts for the 2000 Acura Integra come from 2 brands — DORMAN and JAPANESE OE.

Listed part numbers: DORMAN 926157 and JAPANESE OE KF811344.

This table covers the Power Steering Pressure hoses. Typical signs include swelling, cracks, a soft spot, or a leak at a clamp. Replace adjacent aged hoses while the system is drained — they share the same heat cycle. Read more

4 Power Steering Pressure Hose parts are listed for the 2000 Acura Integra, from EDELMANN and SUNSONG.

This group includes EDELMANN 80297, EDELMANN 80300 and SUNSONG 3401226 and the remaining parts above.

This table covers the Power Steering pressure sensors. Typical signs include a check-engine light for MAP or fuel-rail pressure, or a limp mode under load. A vacuum leak or a clogged reference line will fake a bad pressure sensor. Read more

5 Power Steering Pressure Sensor parts for the 2000 Acura Integra come from 5 brands — ULTRA-POWER, LARES, ROSTRA and 2 other brands. The "Popular" part is ULTRA-POWER 1S1770.

This group includes ULTRA-POWER 1S1770, LARES 450 and ROSTRA 690110 and the remaining parts above.

This table covers the Power Steering pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit. Read more

3 Power Steering Pump parts are listed for the 2000 Acura Integra, from LARES, MAVAL and TERREPOWER.

In the New grade, LARES supplies 1 part: brand-new units rather than rebuilt ones. A representative part number is LARES 3046.

In the Remanufactured grade, MAVAL and TERREPOWER supply 2 parts: factory-rebuilt units with new wear components. A representative part number is MAVAL 96322M.

Part numbers include LARES 3046, MAVAL 96322M and TERREPOWER 9900720.

This table covers the Power Steering Pump Seal kits. Read more

3 Power Steering Pump Seal Kit parts for the 2000 Acura Integra come from 3 brands — EDELMANN, FVP and SUNSONG.

Part numbers include EDELMANN 8906 and SUNSONG 8401353, among others listed above.

This table covers the Power Steering Reservoir (Suction) hoses. Typical signs include swelling, cracks, a soft spot, or a leak at a clamp. Replace adjacent aged hoses while the system is drained — they share the same heat cycle. Read more

One part is listed for the 2000 Acura Integra — SUNSONG 3404317.

This table covers the Power Steering Reservoir caps. Typical signs include a leak at the neck, a cap that will not hold pressure, or a missing tether. Match the pressure rating or thread in the notes — radiator, reservoir and fuel caps are not interchangeable. Read more

3 Power Steering Reservoir Cap parts for the 2000 Acura Integra come from 3 brands — DORMAN, SKP and ULTRA-POWER.

Part numbers include DORMAN 80983 and SKP SK80983D, among others listed above.

This table covers the Power Steering Return hoses. Typical signs include swelling, cracks, a soft spot, or a leak at a clamp. Replace adjacent aged hoses while the system is drained — they share the same heat cycle. Read more

8 Power Steering Return Hose parts for the 2000 Acura Integra come from 4 brands — SUNSONG, FAMOUS BRAND, CONTINENTAL and 1 other brand. The "Popular" part is FAMOUS BRAND 36197.

Part numbers include FAMOUS BRAND 36197, FAMOUS BRAND 36196 and CONTINENTAL 65221, among others listed above.

This table covers the fittings on a power-steering return hose. Read more

3 Power Steering Return Line End Fitting parts are listed for the 2000 Acura Integra, from EDELMANN, FVP and SUNSONG.

This group includes EDELMANN 39124 and SUNSONG 3604030 and the remaining parts above.

This table covers the steering gear assemblies that turn the tie rods. Typical signs include fluid at a torn boot, a growl when you turn, or play that the inner tie rods do not explain. Flush the old power-steering fluid with the rack — grit in the old fluid is the usual cause of a repeat leak. Read more

5 Rack and Pinion parts for the 2000 Acura Integra come from 5 brands — LARES, EDELMANN, TOP NOTCH and 2 other brands. The "Popular" part is LARES 23004.

The New section: 3 options from LARES, EDELMANN and TOP NOTCH. LARES 23004 is listed in this group.

The Remanufactured section: 2 options from MAVAL and TERREPOWER. MAVAL 9211M is listed in this group.

This group includes LARES 23004, EDELMANN 57193 and TOP NOTCH TNH10026 and the remaining parts above.

This table covers the rubber boots that seal the inner tie-rod joints on the rack. Read more

12 Rack and Pinion Bellow parts are listed for the 2000 Acura Integra, from MOOG, BECK/ARNLEY, MEVOTECH and 6 other brands. HOLSTEIN 2SBK0001 carries the "Popular" badge.

This table covers the Rack and Pinion bushings. Typical signs include a clunk over bumps, or a torn or walked-out bushing you can see. Press the new bushing square. A cocked bushing will tear in a few thousand miles. Read more

4 Rack and Pinion Bushing parts for the 2000 Acura Integra come from 3 brands — DORMAN, MEVOTECH and TRW.

This group includes DORMAN 541459, DORMAN 531695 and MEVOTECH MK9891 and the remaining parts above.

This table covers the Rack and Pinion Seal kits. Read more

3 Rack and Pinion Seal Kit parts are listed for the 2000 Acura Integra, from EDELMANN, FVP and SUNSONG.

Listed part numbers: EDELMANN 8912 and SUNSONG 8401335, plus the other parts above.

This table covers the Steering Damper bellows. Read more

One part is listed for the 2000 Acura Integra — ULTRA-POWER K9863.

This table covers the inner and outer tie-rod ends that steer each front knuckle. Typical signs include play on center, a feathered front tire, or a boot that has split and packed with grit. Replace inner and outer ends together on a high-mileage axle, then get an alignment. Read more

36 Tie Rod End parts are listed for the 2000 Acura Integra, from MEVOTECH, BECK/ARNLEY, DELPHI and 12 other brands. MEVOTECH MES3332R carries the "Popular" badge. Daily Driver and Economy are all represented, and Economy alone accounts for 22 parts.

This table covers the Tie Rod End boots. Typical signs include a split boot, grease flung around the joint, or a click once grit is inside. A boot caught early is a kit. Once the joint has clicked, the joint itself is usually worn. Read more

ENERGY SUSPENSION supplies both parts for the 2000 Acura Integra.

Part numbers include ENERGY SUSPENSION 913103G and ENERGY SUSPENSION 913104G.