2000 Acura Integra Automatic Transmission Parts

This table covers the clutch-plate packs inside the transmission or transfer case. Read more

RAYBESTOS POWERTRAIN supplies both parts for the 2000 Acura Integra.

The Friction Plate Pack section lists 1 option from RAYBESTOS POWERTRAIN — grouped under the catalog's "Friction Plate Pack" designation — the notes column spells out what sets them apart. RAYBESTOS POWERTRAIN RCP96179 is listed in this group.

In the Steel Plate Pack grade, RAYBESTOS POWERTRAIN supplies 1 part: grouped under the catalog's "Steel Plate Pack" designation — the notes column spells out what sets them apart. A representative part number is RAYBESTOS POWERTRAIN STMHONDA29.

Listed part numbers: RAYBESTOS POWERTRAIN RCP96179 and RAYBESTOS POWERTRAIN STMHONDA29.

This table covers the gaskets that seal the Drain Plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

This group shows a single part: DORMAN 652530CD.

This table covers the replacement filters for this application — the table heading and notes say which circuit. Typical signs include restricted flow — long cranking, weak airflow, or dirty fluid after a short interval. Seat the new filter so it cannot bypass, and use the grade the notes call for. Read more

5 Filter parts are listed for the 2000 Acura Integra, from PA CARGO, ATP, BECK/ARNLEY and 2 other brands. PA CARGO 88710Q carries the "Popular" badge.

In the Economy grade, PA CARGO supplies 1 part: the catalog's value-priced group. A representative part number is PA CARGO 88710Q.

The Standard Replacement section lists 4 options from ATP, BECK/ARNLEY, RAYBESTOS POWERTRAIN and 1 other brand — built to original-equipment specification. ATP B285 is listed in this group.

Listed part numbers: PA CARGO 88710Q, ATP B285 and BECK/ARNLEY 0440355, plus the other parts above.

This table covers the Fluid Pan drain plugs. Read more

This group shows a single part: DORMAN 090178.

This table covers the seals at the Input Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

2 Input Shaft Seal parts for the 2000 Acura Integra come from 2 brands — NATIONAL and WJB / INMOTION PARTS.

Part numbers include NATIONAL 220918 and WJB / INMOTION PARTS WS220918.

This table covers the seals at the Manual Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

3 Manual Shaft Seal parts for the 2000 Acura Integra come from 3 brands — BCA, NATIONAL and WJB / INMOTION PARTS.

Part numbers include BCA NS221207, NATIONAL 221207 and WJB / INMOTION PARTS WS221207.

This table covers the wear sleeves used to restore a Output Shaft seal surface. Read more

8 Output Shaft Repair Sleeve parts are listed for the 2000 Acura Integra, from NATIONAL, SKF, WJB / INMOTION PARTS and 2 other brands. NATIONAL 99139 carries the "Popular" badge.

Part numbers include NATIONAL 99139, NATIONAL 99157 and BCA NS99157, among others listed above.

This table covers the seals at the Output Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

14 Output Shaft Seal parts are listed for the 2000 Acura Integra, from NATIONAL, SKF, ATP and 6 other brands. NATIONAL 710314 carries the "Popular" badge.

This table covers the rebuild kits for this assembly. Read more

4 Rebuild Kit parts for the 2000 Acura Integra come from 2 brands — PA CARGO and PIONEER.

The Deluxe Kit (Master Kit + Filter, Band & Common Bushings) section lists 1 option from PA CARGO — grouped under the catalog's "Deluxe Kit (Master Kit + Filter, Band & Common Bushings)" designation — the notes column spells out what sets them apart. PA CARGO MRK8800R is listed in this group.

In the Master Kit (Overhaul Kit + Friction & Steel Clutch Plates) grade, PA CARGO and PIONEER supply 2 parts: grouped under the catalog's "Master Kit (Overhaul Kit + Friction & Steel Clutch Plates)" designation — the notes column spells out what sets them apart. A representative part number is PA CARGO DK8800R.

The Overhaul Kit (Gaskets, Seals, O-Rings & Sealing Rings) section lists 1 option from PA CARGO — grouped under the catalog's "Overhaul Kit (Gaskets, Seals, O-Rings & Sealing Rings)" designation — the notes column spells out what sets them apart. PA CARGO K88900Q is listed in this group.

Part numbers include PA CARGO MRK8800R, PA CARGO DK8800R and PIONEER 752226, among others listed above.

This table covers the wear sleeves used to restore a Shift Shaft seal surface. Read more

This group shows a single part: SKF 99049.

This table covers the seals at the Shift Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

5 Shift Shaft Seal parts for the 2000 Acura Integra come from 3 brands — ATP, PIONEER and SKF. The "Popular" part is ATP HO22.

Listed part numbers: ATP HO22, ATP HO23 and PIONEER 759172, plus the other parts above.

This table covers the Shift solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

5 Shift Solenoid parts for the 2000 Acura Integra come from 4 brands — STANDARD MOTOR PRODUCTS, ROSTRA, WELLS and 1 other brand.

In the Single Solenoid grade, STANDARD MOTOR PRODUCTS supplies 1 part: grouped under the catalog's "Single Solenoid" designation — the notes column spells out what sets them apart. A representative part number is STANDARD MOTOR PRODUCTS TCS248.

In the Solenoid Pack / Kit grade, ROSTRA, STANDARD MOTOR PRODUCTS and WELLS supply 3 parts: grouped under the catalog's "Solenoid Pack / Kit" designation — the notes column spells out what sets them apart. A representative part number is ROSTRA 520317.

1 further part sits outside the graded sections, with the same engine-level match.

Part numbers include STANDARD MOTOR PRODUCTS TCS248, ROSTRA 520317 and STANDARD MOTOR PRODUCTS TCS68, among others listed above.

This table covers the Torque converters. Typical signs include a sulfur smell, rattling substrate, or an efficiency code. Confirm CARB vs Federal certification in the notes before ordering. Read more

One part is listed for the 2000 Acura Integra — TC REMANUFACTURING HO16.

This table covers the Torque Converter Clutch solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid. Read more

One part is listed for the 2000 Acura Integra — ROSTRA 520561.

This table covers the seals at the Torque Converter Shaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

6 Torque Converter Shaft Seal parts for the 2000 Acura Integra come from 6 brands — NATIONAL, TIMKEN, ATP and 3 other brands. The "Popular" part is NATIONAL 350609.

Part numbers include NATIONAL 350609 and ATP HO21, among others listed above.

This table covers the automatic-transmission fluids specified for this gearbox. Typical signs include harsh or delayed shifts, fluid that smells burnt, or a shudder at light throttle. Use exactly the specification in the notes. Automatic transmissions are unforgiving of the wrong fluid. Read more

16 Transmission Fluid parts are listed for the 2000 Acura Integra, from LIQUI MOLY, VALVOLINE, LUCAS OIL and 4 other brands. ACDELCO 109243 carries the "Popular" badge.

In the Dexron grade, ACDELCO supplies 1 part: grouped under the catalog's "Dexron" designation — the notes column spells out what sets them apart. A representative part number is ACDELCO 109243.

The DW-1 section lists 1 option from AISIN — grouped under the catalog's "DW-1" designation — the notes column spells out what sets them apart. AISIN ATFDW1 is listed in this group.

In the Multi-Vehicle grade, LIQUI MOLY, VALVOLINE, LUCAS OIL and 2 other brands supply 14 parts: grouped under the catalog's "Multi-Vehicle" designation — the notes column spells out what sets them apart. A representative part number is MOBIL 126505.

This table covers the conditioners and additives used with this transmission fluid. Read more

8 Transmission Fluid Additive parts are listed for the 2000 Acura Integra, from LUBEGARD and ATP. LUBEGARD 19610 carries the "Popular" badge.

Part numbers include LUBEGARD 19610, LUBEGARD 60902 and ATP AT203, among others listed above.

This table covers the mounts that hold the transmission to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

5 Transmission Mount parts for the 2000 Acura Integra come from 5 brands — DEA / MARMON RIDE CONTROL, ANCHOR, BECK/ARNLEY and 2 other brands. The "Popular" part is DEA / MARMON RIDE CONTROL A6551.

This group includes DEA / MARMON RIDE CONTROL A6551, ANCHOR 8330 and BECK/ARNLEY 1041473 and the remaining parts above.