2012 Acura TL Engine Parts

This table covers the wear sleeves used to restore a Camshaft seal surface. Read more

5 Camshaft Repair Sleeve parts are listed for the 2012 Acura TL, from TIMKEN, BCA, NATIONAL and 2 other brands. TIMKEN KWK99147 carries the "Popular" badge. All of them fit every engine offered in the 2012 TL.

Part numbers include TIMKEN KWK99147, BCA NS99147 and NATIONAL 99147, among others listed above.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

13 Camshaft Seal parts are listed for the 2012 Acura TL, from VICTOR REINZ, FEL-PRO, MAHLE / CLEVITE and 9 other brands. FEL-PRO TCS46025 carries the "Popular" badge. All of them fit every engine offered in the 2012 TL.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

7 Connecting Rod Bearing parts for the 2012 Acura TL come from 5 brands — KING ENGINE BEARINGS, TOPLINE, ENGINETECH and 2 other brands. The "Popular" part is ENGINETECH BB1538.

The High Performance section lists 1 option from KING ENGINE BEARINGS — engineered beyond original-equipment specification. KING ENGINE BEARINGS CR6837XP is listed in this group.

In the Standard Replacement grade, ENGINETECH, KING ENGINE BEARINGS, ITM ENGINE COMPONENTS and 2 other brands supply 5 parts: built to original-equipment specification. A representative part number is ENGINETECH BB1538.

1 further part sits outside the graded sections, with the same engine-level match.

Part numbers include ENGINETECH BB1538, KING ENGINE BEARINGS CR6837XP and KING ENGINE BEARINGS CR6837SM, among others listed above.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

8 Conversion / Lower Gasket Set parts for the 2012 Acura TL come from 7 brands — AJUSA, APEX, ENGINETECH and 4 other brands. The "Popular" part is APEX ACS1055. 4 parts fit every engine; the other 4 are engine-specific.

Part numbers include APEX ACS1055, ENGINETECH HO35CSA and FEL-PRO CS26265, among others listed above.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

5 Crankshaft Main Bearing parts are listed for the 2012 Acura TL, from TOPLINE, ENGINETECH, ITM ENGINE COMPONENTS and 1 other brand. ENGINETECH BC1537 carries the "Popular" badge. 2 parts fit every engine; the other 3 are engine-specific.

Listed part numbers: ENGINETECH BC1537, ITM ENGINE COMPONENTS 4M1201 and KING ENGINE BEARINGS MB4508SI, plus the other parts above.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

4 Crankshaft Repair Sleeve parts are listed for the 2012 Acura TL, from SCHAEFFLER, SKF and WJB / INMOTION PARTS. 3 parts fit every engine; the other 1 is engine-specific.

Part numbers include SCHAEFFLER SR3549, SCHAEFFLER SR4784 and SKF 99313, among others listed above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

22 Crankshaft Seal parts are listed for the 2012 Acura TL, from ELRING, MAHLE / CLEVITE, TIMKEN and 10 other brands. FEL-PRO BS40685 carries the "Popular" badge. All of them fit every engine offered in the 2012 TL.

This table covers the bolts that clamp the cylinder head to the block. Read more

11 Cylinder Head Bolt parts for the 2012 Acura TL come from 9 brands — ELRING, APEX, ENGINETECH and 6 other brands. The "Popular" part is APEX AHB155. 10 parts fit every engine; the other 1 is engine-specific.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

20 Cylinder Head Gasket parts for the 2012 Acura TL come from 7 brands — AJUSA, APEX, FEL-PRO and 4 other brands. The "Popular" part is APEX AHG170.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

14 Cylinder Head Gasket Set parts for the 2012 Acura TL come from 8 brands — FEL-PRO, APEX, AJUSA and 5 other brands. The "Popular" part is APEX AHS1069.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

KAT'S HEATERS supplies both parts for the 2012 Acura TL. 1 part fits every engine; the other 1 is engine-specific.

Listed part numbers: KAT'S HEATERS 11419 and KAT'S HEATERS 28500.

This table covers the Engine covers. Read more

This group shows a single part: TECHPRO AC1228110.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

4 Engine Kit Gasket Set parts for the 2012 Acura TL come from 3 brands — AJUSA, FEL-PRO and TOPLINE.

Part numbers include AJUSA 50441400, AJUSA 50307400 and FEL-PRO 2603206, among others listed above.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

7 Exhaust Valve parts are listed for the 2012 Acura TL, from MELLING, ITM ENGINE COMPONENTS, MAHLE / CLEVITE and 3 other brands. ITM ENGINE COMPONENTS RX9599 carries the "Popular" badge. All of them fit every engine offered in the 2012 TL.

This group includes ITM ENGINE COMPONENTS RX9599, MELLING V0779 and MAHLE / CLEVITE 2114674 and the remaining parts above.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

2 Harmonic Balancer parts for the 2012 Acura TL come from 2 brands — ATP and DAYCO. Every part fits both the 3.5L V6 and the 3.7L V6.

This group includes ATP 102367 and DAYCO PB1713N.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

8 Intake Manifold Gasket parts for the 2012 Acura TL come from 6 brands — BECK/ARNLEY, ELRING, APEX and 3 other brands. The "Popular" part is APEX AMS1691. Every part fits both the 3.5L V6 and the 3.7L V6.

Part numbers include APEX AMS1691, MAHLE / CLEVITE MS19696 and BECK/ARNLEY 0376217, among others listed above.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Intake Plenum Gasket parts are listed for the 2012 Acura TL, from VICTOR REINZ, FEL-PRO, MAHLE / CLEVITE and 2 other brands. FEL-PRO MS964093 carries the "Popular" badge. All of them fit every engine offered in the 2012 TL.

This group includes FEL-PRO MS964093, MAHLE / CLEVITE MS19700 and APEX AMS1690 and the remaining parts above.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

5 Intake Valve parts are listed for the 2012 Acura TL, from MELLING, ENGINETECH, MAHLE / CLEVITE and 2 other brands. MELLING V0336 carries the "Popular" badge. All of them fit every engine offered in the 2012 TL.

This group includes MELLING V0336, ENGINETECH IM4476 and MAHLE / CLEVITE 2114615 and the remaining parts above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

20 Motor Mount parts are listed for the 2012 Acura TL, from SKP, ANCHOR, DEA / MARMON RIDE CONTROL and 4 other brands. SKP SKM9247 carries the "Popular" badge. 13 parts fit every engine; the other 7 are engine-specific.

In the Economy grade, SKP and ULTRA-POWER supply 5 parts: the catalog's value-priced group. A representative part number is SKP SKM9247.

The Standard Replacement section: 15 options from ANCHOR, DEA / MARMON RIDE CONTROL, PIONEER and 2 other brands. ANCHOR 9247 is listed in this group.

This table covers the Motor Mount kits. Read more

One part is listed for the 2012 Acura TL — ANCHOR 300857.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

65 Oil parts are listed for the 2012 Acura TL, from VALVOLINE, MOBIL, LIQUI MOLY and 3 other brands. LIQUI MOLY 20438 carries the "Popular" badge. They are grouped as Conventional, Full Synthetic, High Mileage (>75,000 Miles) and Synthetic Blend, with Full Synthetic the largest group at 44 parts from VALVOLINE, LIQUI MOLY, IDEMITSU and 3 other brands.

This table covers the Oil Cooler Mounting kits. Read more

2 Oil Cooler Mounting Kit parts for the 2012 Acura TL come from HAYDEN. Every part fits both the 3.5L V6 and the 3.7L V6.

Part numbers include HAYDEN 238 and HAYDEN 153.

This table covers the Oil Dipstick tubes. Read more

One part is listed for the 2012 Acura TL — DORMAN 917387.

This table covers the drain plugs in the oil pan. Read more

9 Oil Drain Plug parts are listed for the 2012 Acura TL, from DORMAN, ELRING, AGS and 3 other brands. DORMAN 090033 carries the "Popular" badge. 8 parts fit every engine; the other 1 is engine-specific.

Part numbers include DORMAN 090033, DORMAN 090053 and AGS ODP00007, among others listed above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Oil Drain Plug Gasket parts for the 2012 Acura TL come from 6 brands — DORMAN, FEL-PRO, AJUSA and 3 other brands. The "Popular" part is DORMAN 095144. Every part fits both the 3.5L V6 and the 3.7L V6.

This group includes DORMAN 095144, FEL-PRO 73346 and AJUSA 22007400 and the remaining parts above.