2013 Acura TL Engine Parts

This table covers the wear sleeves used to restore a Camshaft seal surface. Read more

3 Camshaft Repair Sleeve parts for the 2013 Acura TL come from 3 brands — BCA, NATIONAL and WJB / INMOTION PARTS. Every part fits both the 3.5L V6 and the 3.7L V6.

Listed part numbers: BCA NS99147, NATIONAL 99147 and WJB / INMOTION PARTS WS99147.

This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

11 Camshaft Seal parts for the 2013 Acura TL come from 10 brands — VICTOR REINZ, FEL-PRO, MAHLE / CLEVITE and 7 other brands. The "Popular" part is FEL-PRO TCS46025. Every part fits both the 3.5L V6 and the 3.7L V6.

This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

7 Connecting Rod Bearing parts are listed for the 2013 Acura TL, from KING ENGINE BEARINGS, TOPLINE, ENGINETECH and 2 other brands. ENGINETECH BB1538 carries the "Popular" badge.

In the High Performance grade, KING ENGINE BEARINGS supplies 1 part: engineered beyond original-equipment specification. A representative part number is KING ENGINE BEARINGS CR6837XP.

The Standard Replacement section lists 5 options from ENGINETECH, KING ENGINE BEARINGS, ITM ENGINE COMPONENTS and 2 other brands — built to original-equipment specification. ENGINETECH BB1538 is listed in this group.

1 ungrouped part is not assigned to a grade, with the same engine-level match.

This group includes ENGINETECH BB1538, KING ENGINE BEARINGS CR6837XP and KING ENGINE BEARINGS CR6837SM and the remaining parts above.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

8 Conversion / Lower Gasket Set parts are listed for the 2013 Acura TL, from AJUSA, APEX, ENGINETECH and 4 other brands. APEX ACS1055 carries the "Popular" badge. 4 parts fit every engine; the other 4 are engine-specific.

This group includes APEX ACS1055, ENGINETECH HO35CSA and FEL-PRO CS26265 and the remaining parts above.

This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly. Read more

5 Crankshaft Main Bearing parts for the 2013 Acura TL come from 4 brands — TOPLINE, ENGINETECH, ITM ENGINE COMPONENTS and 1 other brand. The "Popular" part is ENGINETECH BC1537. 2 parts fit every engine; the other 3 are engine-specific.

This group includes ENGINETECH BC1537, ITM ENGINE COMPONENTS 4M1201 and KING ENGINE BEARINGS MB4508SI and the remaining parts above.

This table covers the sleeves used to restore a grooved crankshaft seal surface. Read more

4 Crankshaft Repair Sleeve parts for the 2013 Acura TL come from 3 brands — SCHAEFFLER, SKF and WJB / INMOTION PARTS. 3 parts fit every engine; the other 1 is engine-specific.

Listed part numbers: SCHAEFFLER SR3549, SCHAEFFLER SR4784 and SKF 99313, plus the other parts above.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

20 Crankshaft Seal parts for the 2013 Acura TL come from 12 brands — ELRING, MAHLE / CLEVITE, TIMKEN and 9 other brands. The "Popular" part is FEL-PRO BS40685. Every part fits both the 3.5L V6 and the 3.7L V6.

This table covers the bolts that clamp the cylinder head to the block. Read more

11 Cylinder Head Bolt parts are listed for the 2013 Acura TL, from ELRING, APEX, ENGINETECH and 6 other brands. APEX AHB155 carries the "Popular" badge. 10 parts fit every engine; the other 1 is engine-specific.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

20 Cylinder Head Gasket parts are listed for the 2013 Acura TL, from AJUSA, APEX, FEL-PRO and 4 other brands. APEX AHG170 carries the "Popular" badge.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

14 Cylinder Head Gasket Set parts are listed for the 2013 Acura TL, from FEL-PRO, APEX, AJUSA and 5 other brands. APEX AHS1069 carries the "Popular" badge.

This table covers the block heaters that warm the coolant or oil in cold weather. Read more

2 Engine Block Heater parts for the 2013 Acura TL come from KAT'S HEATERS. 1 part fits every engine; the other 1 is engine-specific.

Listed part numbers: KAT'S HEATERS 11419 and KAT'S HEATERS 28500.

This table covers the Engine covers. Read more

One part is listed for the 2013 Acura TL — TECHPRO AC1228110.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

4 Engine Kit Gasket Set parts are listed for the 2013 Acura TL, from AJUSA, FEL-PRO and TOPLINE.

Part numbers include AJUSA 50441400, AJUSA 50307400 and FEL-PRO 2603206, among others listed above.

This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

7 Exhaust Valve parts for the 2013 Acura TL come from 6 brands — MELLING, ITM ENGINE COMPONENTS, MAHLE / CLEVITE and 3 other brands. The "Popular" part is ITM ENGINE COMPONENTS RX9599. Every part fits both the 3.5L V6 and the 3.7L V6.

This group includes ITM ENGINE COMPONENTS RX9599, MELLING V0779 and MAHLE / CLEVITE 2114674 and the remaining parts above.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

2 Harmonic Balancer parts are listed for the 2013 Acura TL, from ATP and DAYCO. All of them fit every engine offered in the 2013 TL.

This group includes ATP 102367 and DAYCO PB1713N.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

8 Intake Manifold Gasket parts are listed for the 2013 Acura TL, from BECK/ARNLEY, ELRING, APEX and 3 other brands. APEX AMS1691 carries the "Popular" badge. All of them fit every engine offered in the 2013 TL.

This group includes APEX AMS1691, MAHLE / CLEVITE MS19696 and BECK/ARNLEY 0376217 and the remaining parts above.

This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Intake Plenum Gasket parts for the 2013 Acura TL come from 5 brands — VICTOR REINZ, FEL-PRO, MAHLE / CLEVITE and 2 other brands. The "Popular" part is FEL-PRO MS964093. Every part fits both the 3.5L V6 and the 3.7L V6.

Listed part numbers: FEL-PRO MS964093, MAHLE / CLEVITE MS19700 and APEX AMS1690, plus the other parts above.

This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one. Read more

6 Intake Valve parts for the 2013 Acura TL come from 6 brands — MELLING, SBI, ENGINETECH and 3 other brands. The "Popular" part is MELLING V0336. Every part fits both the 3.5L V6 and the 3.7L V6.

This group includes MELLING V0336, SBI 13336 and ENGINETECH IM4476 and the remaining parts above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

20 Motor Mount parts for the 2013 Acura TL come from 7 brands — SKP, ANCHOR, DEA / MARMON RIDE CONTROL and 4 other brands. The "Popular" part is SKP SKM9247. 13 parts fit every engine; the other 7 are engine-specific.

The Economy section lists 5 options from SKP and ULTRA-POWER — the catalog's value-priced group. SKP SKM9247 is listed in this group.

Standard Replacement: 15 parts, from ANCHOR, DEA / MARMON RIDE CONTROL, PIONEER and 2 other brands. A representative part number is ANCHOR 9247.

This table covers the Motor Mount kits. Read more

This group shows a single part: ANCHOR 300857.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

60 Oil parts for the 2013 Acura TL come from 6 brands — VALVOLINE, MOBIL, LIQUI MOLY and 3 other brands. The "Popular" part is LIQUI MOLY 2208. Grades run from Conventional through Synthetic Blend; Full Synthetic is the most populated section, led by VALVOLINE, LIQUI MOLY, IDEMITSU and 3 other brands.

This table covers the Oil Cooler Mounting kits. Read more

HAYDEN supplies both parts for the 2013 Acura TL.

Part numbers include HAYDEN 238 and HAYDEN 153.

This table covers the Oil Dipstick tubes. Read more

This group shows a single part: DORMAN 917387.

This table covers the drain plugs in the oil pan. Read more

9 Oil Drain Plug parts for the 2013 Acura TL come from 6 brands — DORMAN, ELRING, AGS and 3 other brands. The "Popular" part is DORMAN 090033. 8 parts fit every engine; the other 1 is engine-specific.

Listed part numbers: DORMAN 090033, DORMAN 090053 and AGS ODP00007, plus the other parts above.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

6 Oil Drain Plug Gasket parts are listed for the 2013 Acura TL, from DORMAN, FEL-PRO, AJUSA and 3 other brands. DORMAN 095144 carries the "Popular" badge. All of them fit every engine offered in the 2013 TL.

This group includes DORMAN 095144, FEL-PRO 73346 and AJUSA 22007400 and the remaining parts above.

This table covers the caps on the oil filler neck. Read more

4 Oil Filler Cap parts for the 2013 Acura TL come from 4 brands — CALORSTAT, DORMAN, GATES and 1 other brand. Every part fits both the 3.5L V6 and the 3.7L V6.

Listed part numbers: CALORSTAT OC2335, DORMAN 80985 and GATES 31284, plus the other parts above.