362 Engine parts are listed for the 2014 Acura TL, in 57 part types, covering both the 3.5L V6 and the 3.7L V6. Each one has a brand, a manufacturer part number and notes that say where it fits.
On the 2014 Acura TL, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. Most of the listed parts are Oil (28 parts), Crankshaft Seal (20 parts) and Oil Filter (18 parts). The other 54 part types cover the remaining 296 parts.
The 2014 Acura TL was sold with both the 3.5L V6 and the 3.7L V6. Every part on this page is engine-specific. Each part shows which engine(s) it fits.
The most listed brands for 2014 Acura TL engine parts are ELRING (24 parts), MAHLE / CLEVITE (21 parts) and FEL-PRO (19 parts), plus 68 more brands. Quality grades include Standard Replacement, Economy and Premium.
73 parts on this 2014 Acura TL page carry a "Popular" badge — the source catalog's flag for options frequently chosen for this vehicle — including FEL-PRO TCS46025 (Camshaft Seal) and ENGINETECH BB1538 (Connecting Rod Bearing). Click any part number to see every vehicle that part fits.
Camshaft Repair Sleeve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BCA Fits: 3.5L V6 | NS99147 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| NATIONAL Fits: 3.5L V6 | 99147 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| WJB / INMOTION PARTS Fits: 3.5L V6 | WS99147 | 🇺🇸 US 🇨🇦 CA | Installation Depth: 0.98399999999999999 In | View on Amazon |
This table covers the wear sleeves used to restore a Camshaft seal surface.
3 Camshaft Repair Sleeve parts are listed for the 2014 Acura TL, from BCA, NATIONAL and WJB / INMOTION PARTS.
Part numbers include BCA NS99147, NATIONAL 99147 and WJB / INMOTION PARTS WS99147.
Camshaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular Fits: 3.5L V6 | TCS46025 | 🇺🇸 US 🇨🇦 CA | Kit | View on Amazon |
| MAHLE / CLEVITE Popular Fits: 3.5L V6 | 67617 | 🇺🇸 US 🇨🇦 CA | Rubber | View on Amazon |
| NATIONAL Popular Fits: 3.5L V6 | 710451 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| APEX Fits: 3.5L V6 | ATC1400 | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
| BCA Fits: 3.5L V6 | NS710451 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| ELRING Fits: 3.5L V6 | 489890 | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
| SCHAEFFLER Fits: 3.5L V6 | SS3733 | 🇺🇸 US 🇨🇦 CA | Building material Polyacrylate (P)8.001 mm Width | View on Amazon |
| SKF Fits: 3.5L V6 | 15701 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| VICTOR REINZ Fits: 3.5L V6 | 815377200 | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
| VICTOR REINZ Fits: 3.5L V6 | 195377201 | 🇺🇸 US 🇨🇦 CA | Kit | View on Amazon |
| WJB / INMOTION PARTS Fits: 3.5L V6 | WS710451 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
11 Camshaft Seal parts are listed for the 2014 Acura TL, from VICTOR REINZ, FEL-PRO, MAHLE / CLEVITE and 7 other brands. FEL-PRO TCS46025 carries the "Popular" badge.
Connecting Rod Bearing
High Performance
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| KING ENGINE BEARINGS Fits: 3.5L V6 | CR6837XP | 🇺🇸 US 🇨🇦 CA | PmaxblackSet | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Popular Fits: 3.5L V6 | BB1538 | 🇺🇸 US | Set | View on Amazon |
| KING ENGINE BEARINGS Popular Fits: 3.5L V6 | CR6837SM | 🇺🇸 US 🇨🇦 CA | BI-Metal (strengthened aluminum)Set | View on Amazon |
| ITM ENGINE COMPONENTS Fits: 3.5L V6 | 6B1503 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| MAHLE / CLEVITE Fits: 3.5L V6 | CB1897A6 | 🇺🇸 US 🇨🇦 CA | A Series (Aluminum)Set | View on Amazon |
| TOPLINE Fits: 3.5L V6 | RBH38 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
This table covers the bearings in the connecting-rod big ends. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
6 Connecting Rod Bearing parts for the 2014 Acura TL come from 5 brands — KING ENGINE BEARINGS, ENGINETECH, ITM ENGINE COMPONENTS and 2 other brands. The "Popular" part is ENGINETECH BB1538.
The High Performance section lists 1 option from KING ENGINE BEARINGS — engineered beyond original-equipment specification. KING ENGINE BEARINGS CR6837XP is listed in this group.
In the Standard Replacement grade, ENGINETECH, KING ENGINE BEARINGS, ITM ENGINE COMPONENTS and 2 other brands supply 5 parts: built to original-equipment specification. A representative part number is ENGINETECH BB1538.
This group includes ENGINETECH BB1538, KING ENGINE BEARINGS CR6837XP and KING ENGINE BEARINGS CR6837SM and the remaining parts above.
Conversion / Lower Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Popular Fits: 3.5L V6 | HO35CSA | 🇺🇸 US | View on Amazon | |
| FEL-PRO Popular Fits: 3.5L V6 | CS26265 | 🇺🇸 US 🇨🇦 CA | Includes RTV Sealant | View on Amazon |
| AJUSA Fits: 3.5L V6 | 54253700 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| APEX Fits: 3.5L V6 | ACS1055 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| ITM ENGINE COMPONENTS Fits: 3.5L V6 | 0929808 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| MAHLE / CLEVITE Fits: 3.5L V6 | CS54578A | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
6 Conversion / Lower Gasket Set parts for the 2014 Acura TL come from 6 brands — ENGINETECH, FEL-PRO, AJUSA and 3 other brands. The "Popular" part is ENGINETECH HO35CSA.
Part numbers include ENGINETECH HO35CSA, FEL-PRO CS26265 and AJUSA 54253700, among others listed above.
Crankshaft Main Bearing
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Popular Fits: 3.5L V6 | BC1537 | 🇺🇸 US | Set | View on Amazon |
| ITM ENGINE COMPONENTS Fits: 3.5L V6 | 4M1201 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| KING ENGINE BEARINGS Fits: 3.5L V6 | MB4508SI | 🇺🇸 US 🇨🇦 CA | BI-Metal (aluminum silicon base)Set | View on Amazon |
| TOPLINE Fits: 3.5L V6 | TWH37 | 🇺🇸 US 🇨🇦 CA | Thrust Bearing | View on Amazon |
| TOPLINE Fits: 3.5L V6 | MBH37 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
5 Crankshaft Main Bearing parts are listed for the 2014 Acura TL, from TOPLINE, ENGINETECH, ITM ENGINE COMPONENTS and 1 other brand. ENGINETECH BC1537 carries the "Popular" badge.
Listed part numbers: ENGINETECH BC1537, ITM ENGINE COMPONENTS 4M1201 and KING ENGINE BEARINGS MB4508SI, plus the other parts above.
Crankshaft Repair Sleeve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SCHAEFFLER Fits: 3.5L V6 | SR3549 | 🇺🇸 US 🇨🇦 CA | Rear24 MM Width | View on Amazon |
| SCHAEFFLER Fits: 3.5L V6 | SR4784 | 🇺🇸 US 🇨🇦 CA | Rear22.5 mm Width | View on Amazon |
| SKF Fits: 3.5L V6 | 99313 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
| WJB / INMOTION PARTS Fits: 3.5L V6 | WS99317 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
This table covers the sleeves used to restore a grooved crankshaft seal surface.
4 Crankshaft Repair Sleeve parts are listed for the 2014 Acura TL, from SCHAEFFLER, SKF and WJB / INMOTION PARTS.
Part numbers include SCHAEFFLER SR3549, SCHAEFFLER SR4784 and SKF 99313, among others listed above.
Crankshaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular Fits: 3.5L V6 | BS40685 | 🇺🇸 US 🇨🇦 CA | Rubber | View on Amazon |
| MAHLE / CLEVITE Popular Fits: 3.5L V6 | 67782 | 🇺🇸 US 🇨🇦 CA | FrontMolded Rubber | View on Amazon |
| TIMKEN Popular Fits: 3.5L V6 | 711181 | 🇺🇸 US 🇨🇦 CA | 1.614 in. Shaft Size2.205 in. Bore | View on Amazon |
| VICTOR REINZ Popular Fits: 3.5L V6 | 191022201 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| AJUSA Fits: 3.5L V6 | 15089500 | 🇺🇸 US 🇨🇦 CA | FrontClockwise | View on Amazon |
| AJUSA Fits: 3.5L V6 | 15089600 | 🇺🇸 US 🇨🇦 CA | RearCounter Clockwise | View on Amazon |
| APEX Fits: 3.5L V6 | ATC1401 | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
| APEX Fits: 3.5L V6 | ABS155 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
| ELRING Fits: 3.5L V6 | 590797 | 🇺🇸 US 🇨🇦 CA | Height [MM]: 10Inner Diameter [mm]: 80 | View on Amazon |
| ELRING Fits: 3.5L V6 | 490050 | 🇺🇸 US 🇨🇦 CA | Height [MM]: 7Swirl Type: Right-hand Twist | View on Amazon |
| ELRING Fits: 3.5L V6 | 464580 | 🇺🇸 US 🇨🇦 CA | Height [MM]: 8Swirl Type: Right-hand Twist | View on Amazon |
| ELRING Fits: 3.5L V6 | 478920 | 🇺🇸 US 🇨🇦 CA | Height [MM]: 8Swirl Type: Left-hand Twist | View on Amazon |
| MAHLE / CLEVITE Fits: 3.5L V6 | 67766 | 🇺🇸 US 🇨🇦 CA | Rubber | View on Amazon |
| NATIONAL Fits: 3.5L V6 | 710614 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
| SCHAEFFLER Fits: 3.5L V6 | SS3876 | 🇺🇸 US 🇨🇦 CA | Rear10 MM Width | View on Amazon |
| SKF Fits: 3.5L V6 | 31495 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
| SKP Fits: 3.5L V6 | SKSEAL029S | 🇺🇸 US 🇨🇦 CA | Contains 3 Camshaft/Crankshaft Seals | View on Amazon |
| TIMKEN Fits: 3.5L V6 | 710614 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
| VICTOR REINZ Fits: 3.5L V6 | 181011701 | 🇺🇸 US 🇨🇦 CA | SetRubber | View on Amazon |
| WJB / INMOTION PARTS Fits: 3.5L V6 | WS710614 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
20 Crankshaft Seal parts are listed for the 2014 Acura TL, from ELRING, MAHLE / CLEVITE, TIMKEN and 9 other brands. FEL-PRO BS40685 carries the "Popular" badge.
Cylinder Head Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Popular Fits: 3.5L V6 | HB271 | 🇺🇸 US | Set | View on Amazon |
| FEL-PRO Popular Fits: 3.5L V6 | ES713291 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| AJUSA Fits: 3.5L V6 | 81052100 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| APEX Fits: 3.5L V6 | AHB155 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| BECK/ARNLEY Fits: 3.5L V6 | 0161061 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| ELRING Fits: 3.5L V6 | 533030 | 🇺🇸 US 🇨🇦 CA | SetBolt Head-/Nut Design: Male Star | View on Amazon |
| ELRING Fits: 3.5L V6 | 468750 | 🇺🇸 US 🇨🇦 CA | SetBolt Head-/Nut Design: Male Star | View on Amazon |
| MAHLE / CLEVITE Fits: 3.5L V6 | GS33606 | 🇺🇸 US 🇨🇦 CA | Set for 1 Cylinder Head Cylinder Head BoltSteel | View on Amazon |
| TOPLINE Fits: 3.5L V6 | HBH37 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| VICTOR REINZ Fits: 3.5L V6 | 141014301 | 🇺🇸 US 🇨🇦 CA | SetContains 8 Pieces | View on Amazon |
This table covers the bolts that clamp the cylinder head to the block.
10 Cylinder Head Bolt parts for the 2014 Acura TL come from 9 brands — ELRING, ENGINETECH, FEL-PRO and 6 other brands. The "Popular" part is ENGINETECH HB271.
Cylinder Head Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular Fits: 3.5L V6 | 26510PT | 🇺🇸 US 🇨🇦 CA | Perma TorqueMLS | View on Amazon |
| FEL-PRO Popular Fits: 3.5L V6 | 26509PT | 🇺🇸 US 🇨🇦 CA | Perma TorqueMLS | View on Amazon |
| ULTRA-POWER Popular Fits: 3.5L V6 | 26509PT | 🇺🇸 US 🇨🇦 CA | Head Bolt Replacement RecommendedHead Bolts Not Included | View on Amazon |
| AJUSA Fits: 3.5L V6 | 10194900 | 🇺🇸 US 🇨🇦 CA | Multi Layered Steel | View on Amazon |
| AJUSA Fits: 3.5L V6 | 10195000 | 🇺🇸 US 🇨🇦 CA | Multi Layered Steel | View on Amazon |
| APEX Fits: 3.5L V6 | AHG169L | 🇺🇸 US 🇨🇦 CA | Left | View on Amazon |
| APEX Fits: 3.5L V6 | AHG169R | 🇺🇸 US 🇨🇦 CA | Right | View on Amazon |
| ELRING Fits: 3.5L V6 | 948680 | 🇺🇸 US 🇨🇦 CA | Left | View on Amazon |
| ELRING Fits: 3.5L V6 | 948720 | 🇺🇸 US 🇨🇦 CA | Right | View on Amazon |
| MAHLE / CLEVITE Fits: 3.5L V6 | 54756 | 🇺🇸 US 🇨🇦 CA | Multi-Layered Steel | View on Amazon |
| MAHLE / CLEVITE Fits: 3.5L V6 | 54755 | 🇺🇸 US 🇨🇦 CA | Multi-Layered Steel | View on Amazon |
| VICTOR REINZ Fits: 3.5L V6 | 611068400 | 🇺🇸 US 🇨🇦 CA | Left | View on Amazon |
| VICTOR REINZ Fits: 3.5L V6 | 611068500 | 🇺🇸 US 🇨🇦 CA | Right | View on Amazon |
This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
13 Cylinder Head Gasket parts for the 2014 Acura TL come from 7 brands — FEL-PRO, AJUSA, APEX and 4 other brands. The "Popular" part is FEL-PRO 26510PT.
Cylinder Head Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| APEX Popular Fits: 3.5L V6 | AHS1069 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| FEL-PRO Popular Fits: 3.5L V6 | HS26509PT | 🇺🇸 US 🇨🇦 CA | Includes Permadry Molded Rubber Valve Cover Gasket(s), Valve Stem Seals | View on Amazon |
| AJUSA Fits: 3.5L V6 | 52489700 | 🇺🇸 US 🇨🇦 CA | Complete Set | View on Amazon |
| FEL-PRO Fits: 3.5L V6 | HS26509BPTVK | 🇺🇸 US 🇨🇦 CA | Includes Head BoltsIncludes Valve Stem Seals | View on Amazon |
| ITM ENGINE COMPONENTS Fits: 3.5L V6 | 0916272 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| MAHLE / CLEVITE Fits: 3.5L V6 | HS54755 | 🇺🇸 US 🇨🇦 CA | Includes Valve Stem Seals | View on Amazon |
| TOPLINE Fits: 3.5L V6 | HSH51 | 🇺🇸 US 🇨🇦 CA | Includes Valve Stem Seals | View on Amazon |
This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
7 Cylinder Head Gasket Set parts for the 2014 Acura TL come from 6 brands — FEL-PRO, APEX, AJUSA and 3 other brands. The "Popular" part is APEX AHS1069.
This group includes APEX AHS1069, FEL-PRO HS26509PT and AJUSA 52489700 and the remaining parts above.
Engine Block Heater
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| KAT'S HEATERS Fits: 3.5L V6 | 11419 | 🇺🇸 US 🇨🇦 CA | Freeze Plug Heater | View on Amazon |
| KAT'S HEATERS Fits: 3.5L V6 | 28500 | 🇺🇸 US 🇨🇦 CA | Engine Heater Replacement Cord | View on Amazon |
This table covers the block heaters that warm the coolant or oil in cold weather.
KAT'S HEATERS supplies both parts for the 2014 Acura TL.
This group includes KAT'S HEATERS 11419 and KAT'S HEATERS 28500.
Engine Cover
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| TECHPRO Fits: 3.5L V6 | AC1228110 | 🇺🇸 US 🇨🇦 CA | Lower | View on Amazon |
This table covers the Engine covers.
This group shows a single part: TECHPRO AC1228110.
Engine Kit Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 3.5L V6 | 50441400 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| FEL-PRO Fits: 3.5L V6 | 2603206 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| TOPLINE Fits: 3.5L V6 | CGSH51 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
3 Engine Kit Gasket Set parts for the 2014 Acura TL come from 3 brands — AJUSA, FEL-PRO and TOPLINE.
Listed part numbers: AJUSA 50441400, FEL-PRO 2603206 and TOPLINE CGSH51.
Exhaust Valve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ITM ENGINE COMPONENTS Popular Fits: 3.5L V6 | RX9599 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| MELLING Popular Fits: 3.5L V6 | V0779 | 🇺🇸 US 🇨🇦 CA | High Alloy Steel | View on Amazon |
| MAHLE / CLEVITE Fits: 3.5L V6 | 2114674 | 🇺🇸 US 🇨🇦 CA | 30.50 Head Diameter5.44 Stem Diameter | View on Amazon |
| MELLING Fits: 3.5L V6 | V0779IN | 🇺🇸 US 🇨🇦 CA | High Temperature nickel Base Inconel | View on Amazon |
| QUALCAST Fits: 3.5L V6 | 1010779 | 🇺🇸 US 🇨🇦 CA | 1.181 Head Diameter. | View on Amazon |
| SBI Fits: 3.5L V6 | 10779 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| TOPLINE Fits: 3.5L V6 | EVAC9 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the exhaust valves that let combustion gas out of the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.
7 Exhaust Valve parts are listed for the 2014 Acura TL, from MELLING, ITM ENGINE COMPONENTS, MAHLE / CLEVITE and 3 other brands. ITM ENGINE COMPONENTS RX9599 carries the "Popular" badge.
Listed part numbers: ITM ENGINE COMPONENTS RX9599, MELLING V0779 and MAHLE / CLEVITE 2114674, plus the other parts above.
Harmonic Balancer
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ATP Fits: 3.5L V6 | 102367 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| DAYCO Fits: 3.5L V6 | PB1713N | 🇺🇸 US 🇨🇦 CA | Premium | View on Amazon |
This table covers the crankshaft pulleys / harmonic balancers at the front of the engine.
2 Harmonic Balancer parts for the 2014 Acura TL come from 2 brands — ATP and DAYCO.
This group includes ATP 102367 and DAYCO PB1713N.
Intake Manifold Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| APEX Popular Fits: 3.5L V6 | AMS1691 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| MAHLE / CLEVITE Popular Fits: 3.5L V6 | MS19696 | 🇺🇸 US 🇨🇦 CA | Multi-Layered Steel | View on Amazon |
| BECK/ARNLEY Fits: 3.5L V6 | 0376217 | 🇺🇸 US 🇨🇦 CA | Left | View on Amazon |
| BECK/ARNLEY Fits: 3.5L V6 | 0376216 | 🇺🇸 US 🇨🇦 CA | Right | View on Amazon |
| ELRING Fits: 3.5L V6 | 948770 | 🇺🇸 US 🇨🇦 CA | Left | View on Amazon |
| ELRING Fits: 3.5L V6 | 948760 | 🇺🇸 US 🇨🇦 CA | Right | View on Amazon |
| FEL-PRO Fits: 3.5L V6 | MS97136 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| VICTOR REINZ Fits: 3.5L V6 | 111064901 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
8 Intake Manifold Gasket parts for the 2014 Acura TL come from 6 brands — BECK/ARNLEY, ELRING, APEX and 3 other brands. The "Popular" part is APEX AMS1691.
Part numbers include APEX AMS1691, MAHLE / CLEVITE MS19696 and BECK/ARNLEY 0376217, among others listed above.
Intake Plenum Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Popular Fits: 3.5L V6 | MS964093 | 🇺🇸 US 🇨🇦 CA | Upper | View on Amazon |
| MAHLE / CLEVITE Popular Fits: 3.5L V6 | MS19700 | 🇺🇸 US 🇨🇦 CA | Coated SteelIncludes Throttle Body Gasket | View on Amazon |
| APEX Fits: 3.5L V6 | AMS1690 | 🇺🇸 US 🇨🇦 CA | Upper | View on Amazon |
| BECK/ARNLEY Fits: 3.5L V6 | 0374858 | 🇺🇸 US 🇨🇦 CA | Lower | View on Amazon |
| VICTOR REINZ Fits: 3.5L V6 | 151080401 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| VICTOR REINZ Fits: 3.5L V6 | 151081701 | 🇺🇸 US 🇨🇦 CA | SetImproved Design | View on Amazon |
This table covers the gaskets that seal the Intake Plenum. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
6 Intake Plenum Gasket parts are listed for the 2014 Acura TL, from VICTOR REINZ, FEL-PRO, MAHLE / CLEVITE and 2 other brands. FEL-PRO MS964093 carries the "Popular" badge.
This group includes FEL-PRO MS964093, MAHLE / CLEVITE MS19700 and APEX AMS1690 and the remaining parts above.
Intake Valve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MELLING Popular Fits: 3.5L V6 | V0336 | 🇺🇸 US 🇨🇦 CA | Stainless Steel | View on Amazon |
| SBI Popular Fits: 3.5L V6 | 13336 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| ENGINETECH Fits: 3.5L V6 | IM4476 | 🇺🇸 US | .2165 stem1.417 Head | View on Amazon |
| MAHLE / CLEVITE Fits: 3.5L V6 | 2114615 | 🇺🇸 US 🇨🇦 CA | 29.40mm Head Diameter5.46mm Stem Diameter | View on Amazon |
| QUALCAST Fits: 3.5L V6 | 1013336 | 🇺🇸 US 🇨🇦 CA | 1.417 Head Diameter. | View on Amazon |
| TOPLINE Fits: 3.5L V6 | IVAC9M | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the intake valves that let air (and fuel, on port-injected engines) into the cylinder. Typical signs include a circuit that will not hold, a whistle, or a code for this valve. A stuck valve is often debris. Clean the ports before installing the new one.
6 Intake Valve parts are listed for the 2014 Acura TL, from MELLING, SBI, ENGINETECH and 3 other brands. MELLING V0336 carries the "Popular" badge.
This group includes MELLING V0336, SBI 13336 and ENGINETECH IM4476 and the remaining parts above.
Motor Mount
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SKP Popular Fits: 3.5L V6 | SKM9247 | 🇺🇸 US 🇨🇦 CA | Height: 144 mm | View on Amazon |
| SKP Fits: 3.5L V6 | SKMA4572 | 🇺🇸 US 🇨🇦 CA | Front Right | View on Amazon |
| SKP Fits: 3.5L V6 | SKMA4569 | 🇺🇸 US 🇨🇦 CA | Height: 150 mm | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ANCHOR Popular Fits: 3.5L V6 | 9247 | 🇺🇸 US 🇨🇦 CA | Frontwith Vacuum Port | View on Amazon |
| WESTAR Popular Fits: 3.5L V6 | EM9247 | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
| ANCHOR Fits: 3.5L V6 | 9457 | 🇺🇸 US 🇨🇦 CA | RightHydraulic | View on Amazon |
| ANCHOR Fits: 3.5L V6 | 10170 | 🇺🇸 US 🇨🇦 CA | RearHydraulic | View on Amazon |
| BECK/ARNLEY Fits: 3.5L V6 | 1041887 | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
| DEA / MARMON RIDE CONTROL Fits: 3.5L V6 | A4572 | 🇺🇸 US 🇨🇦 CA | Front Right | View on Amazon |
| DEA / MARMON RIDE CONTROL Fits: 3.5L V6 | A65096 | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
| DEA / MARMON RIDE CONTROL Fits: 3.5L V6 | A65024 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
| PIONEER Fits: 3.5L V6 | 604572 | 🇺🇸 US 🇨🇦 CA | Front RightHydraulic | View on Amazon |
| PIONEER Fits: 3.5L V6 | 614526 | 🇺🇸 US 🇨🇦 CA | FrontHydraulic Mount | View on Amazon |
| PIONEER Fits: 3.5L V6 | 604526 | 🇺🇸 US 🇨🇦 CA | FrontSolid Mount | View on Amazon |
| WESTAR Fits: 3.5L V6 | EM9457 | 🇺🇸 US 🇨🇦 CA | Right | View on Amazon |
This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes.
15 Motor Mount parts are listed for the 2014 Acura TL, from SKP, ANCHOR, DEA / MARMON RIDE CONTROL and 3 other brands. SKP SKM9247 carries the "Popular" badge.
In the Economy grade, SKP supplies 3 parts: the catalog's value-priced group. A representative part number is SKP SKM9247.
The Standard Replacement section: 12 options from ANCHOR, DEA / MARMON RIDE CONTROL, PIONEER and 2 other brands. ANCHOR 9247 is listed in this group.
Motor Mount Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ANCHOR Fits: 3.5L V6 | 300857 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Motor Mount kits.
One part is listed for the 2014 Acura TL — ANCHOR 300857.
Oil
Summary: Notes list SAE 0W-20. Confirm the engine and the weight on the filler cap before you buy. Replacement brands in this table include VALVOLINE, MOBIL and LIQUI MOLY.
Full Synthetic
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| LIQUI MOLY Popular Fits: 3.5L V6 | 2208 | 🇺🇸 US 🇨🇦 CA | Special Tec AA 0W-205 Liter | View on Amazon |
| LIQUI MOLY Popular Fits: 3.5L V6 | 20438 | 🇺🇸 US 🇨🇦 CA | Molygen New Generation 0W-205 Liter | View on Amazon |
| MOBIL Popular Fits: 3.5L V6 | 125197 | 🇺🇸 US 🇨🇦 CA | Full Synthetic 0W-20Mobil Full Synthetic | View on Amazon |
| MOBIL Popular Fits: 3.5L V6 | 124184 | 🇺🇸 US 🇨🇦 CA | 0W-20Mobil 1 Advanced Fuel Economy | View on Amazon |
| VALVOLINE Popular Fits: 3.5L V6 | VV916 | 🇺🇸 US 🇨🇦 CA | Advanced Protection Full Synthetic SAE 0W-201 Quart | View on Amazon |
| IDEMITSU Fits: 3.5L V6 | 30015203750 | 🇺🇸 US | IFG3 0W-20 SP/Motor Oil1 Quart | View on Amazon |
| IDEMITSU Fits: 3.5L V6 | 30016051750 | 🇺🇸 US | IFG3 0W-20 SQ/GF-7A1 Quart | View on Amazon |
| IDEMITSU Fits: 3.5L V6 | 30016051953 | 🇺🇸 US | IFG3 0W-20 SQ/GF-7A5 Quart | View on Amazon |
| LIQUI MOLY Fits: 3.5L V6 | 2207 | 🇺🇸 US 🇨🇦 CA | Special TEC AA 0W-201 Liter | View on Amazon |
| LIQUI MOLY Fits: 3.5L V6 | 20436 | 🇺🇸 US 🇨🇦 CA | Molygen New Generation 0W-201 Liter | View on Amazon |
| LUCAS OIL Fits: 3.5L V6 | 10564 | 🇺🇸 US 🇨🇦 CA | FULL SYNTHETIC MOTOR OIL SAE 0W-201 qt | View on Amazon |
| LUCAS OIL Fits: 3.5L V6 | 18003 | 🇺🇸 US 🇨🇦 CA | Full Synthetic Motor Oil SAE 0W-206 Gallon | View on Amazon |
| MOBIL Fits: 3.5L V6 | 120926 | 🇺🇸 US 🇨🇦 CA | Extended Performance 0W-20Mobil 1 Extended Performance | View on Amazon |
| PENTOSIN Fits: 3.5L V6 | 8044210 | 🇺🇸 US 🇨🇦 CA | 0W-20-Pentospeed-DEXOS1 GEN31 Liter | View on Amazon |
| PENTOSIN Fits: 3.5L V6 | 8044317 | 🇺🇸 US 🇨🇦 CA | Pento Speed FESAE 0W-20 | View on Amazon |
| PENTOSIN Fits: 3.5L V6 | 8044212 | 🇺🇸 US 🇨🇦 CA | 0W-20-Pentospeed-DEXOS1 GEN35 Liters | View on Amazon |
| PENTOSIN Fits: 3.5L V6 | 8044319 | 🇺🇸 US 🇨🇦 CA | Pento Speed FESAE 0W-20 | View on Amazon |
| VALVOLINE Fits: 3.5L V6 | 891682 | 🇺🇸 US 🇨🇦 CA | Extended Protection Full Synthetic SAE 0W-201 Quart | View on Amazon |
| VALVOLINE Fits: 3.5L V6 | 904536 | 🇺🇸 US 🇨🇦 CA | Restore & Protect Full Synthetic SAE 0W-201 Quart | View on Amazon |
| VALVOLINE Fits: 3.5L V6 | 904538 | 🇺🇸 US 🇨🇦 CA | Restore & Protect Full Synthetic SAE 0W-205 Quart | View on Amazon |
| VALVOLINE Fits: 3.5L V6 | 881150 | 🇺🇸 US 🇨🇦 CA | Advanced Protection Full Synthetic SAE 0W-20Easy Pour 5 Quart | View on Amazon |
High Mileage (>75,000 Miles)
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOBIL Popular Fits: 3.5L V6 | 125203 | 🇺🇸 US 🇨🇦 CA | Full Synthetic High Mileage 0W-20Mobil Full Synthetic | View on Amazon |
| MOBIL Fits: 3.5L V6 | 122535 | 🇺🇸 US 🇨🇦 CA | High Mileage 0W-20Mobil 1 High Mileage | View on Amazon |
| MOBIL Fits: 3.5L V6 | 123836 | 🇺🇸 US 🇨🇦 CA | Extended Performance High Mileage 0W-20Extended Performance High Mileage Synthetic Motor Oil 0W-20, 1 Quart | View on Amazon |
| VALVOLINE Fits: 3.5L V6 | 833002 | 🇺🇸 US 🇨🇦 CA | Max Life High Mileage SAE 0W-201 Quart | View on Amazon |
| VALVOLINE Fits: 3.5L V6 | 852400 | 🇺🇸 US 🇨🇦 CA | Full Synthetic High Mileage with Max Life Technology SAE 0W-201 Quart | View on Amazon |
| VALVOLINE Fits: 3.5L V6 | 881149 | 🇺🇸 US 🇨🇦 CA | Max Life High Mileage SAE 0W-20Easy Pour 5 Quart | View on Amazon |
| VALVOLINE Fits: 3.5L V6 | 881168 | 🇺🇸 US 🇨🇦 CA | Full Synthetic High Mileage with Max Life Technology SAE 0W-20Easy Pour 5 Quart | View on Amazon |
This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable.
28 Oil parts are listed for the 2014 Acura TL, from VALVOLINE, MOBIL, LIQUI MOLY and 3 other brands. LIQUI MOLY 2208 carries the "Popular" badge. They are grouped as Full Synthetic and High Mileage (>75,000 Miles), with Full Synthetic the largest group at 21 parts from VALVOLINE, LIQUI MOLY, PENTOSIN and 3 other brands.
Oil Cooler Mounting Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| HAYDEN Fits: 3.5L V6 | 238 | 🇺🇸 US 🇨🇦 CA | Rubber Block Mounting Kit for Heavy Duty Oil Cooler | View on Amazon |
| HAYDEN Fits: 3.5L V6 | 153 | 🇺🇸 US 🇨🇦 CA | Metal Mounting Bracket Kit for Heavy Duty Oil Cooler | View on Amazon |
This table covers the Oil Cooler Mounting kits.
2 Oil Cooler Mounting Kit parts for the 2014 Acura TL come from HAYDEN.
This group includes HAYDEN 238 and HAYDEN 153.
Oil Dipstick / Tube
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: 3.5L V6 | 917387 | 🇺🇸 US 🇨🇦 CA | Dipstick Only | View on Amazon |
This table covers the Oil Dipstick tubes.
One part is listed for the 2014 Acura TL — DORMAN 917387.
Oil Drain Plug
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Popular Fits: 3.5L V6 | 090033 | 🇺🇸 US 🇨🇦 CA | StandardM14-1.50 | View on Amazon |
| DORMAN Popular Fits: 3.5L V6 | 090053 | 🇺🇸 US 🇨🇦 CA | MetalPilot Point | View on Amazon |
| AGS Fits: 3.5L V6 | ODP00007 | 🇺🇸 US 🇨🇦 CA | M14x1.50 | View on Amazon |
| DORMAN Fits: 3.5L V6 | 092020 | 🇺🇸 US 🇨🇦 CA | Thread Size: M14-1.50Twist Style | View on Amazon |
| ELRING Fits: 3.5L V6 | 523500 | 🇺🇸 US 🇨🇦 CA | with Seal RingBolt Head-/Nut Design: Male Hex | View on Amazon |
| ELRING Fits: 3.5L V6 | 523480 | 🇺🇸 US 🇨🇦 CA | without Seal RingThread Size: M14X1,5x15 | View on Amazon |
| REIN Fits: 3.5L V6 | HWU0110 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| SKP Fits: 3.5L V6 | SK090053CD | 🇺🇸 US 🇨🇦 CA | Metal | View on Amazon |
This table covers the drain plugs in the oil pan.
8 Oil Drain Plug parts are listed for the 2014 Acura TL, from DORMAN, ELRING, AGS and 2 other brands. DORMAN 090033 carries the "Popular" badge.
This group includes DORMAN 090033, DORMAN 090053 and AGS ODP00007 and the remaining parts above.
Oil Drain Plug Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Popular Fits: 3.5L V6 | 095144 | 🇺🇸 US 🇨🇦 CA | Aluminum | View on Amazon |
| FEL-PRO Popular Fits: 3.5L V6 | 73346 | 🇺🇸 US 🇨🇦 CA | 0.570 (in) Inside Diameter x 0.860 (in) Outside DiameterFlat Washer | View on Amazon |
| AJUSA Fits: 3.5L V6 | 22007400 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| APEX Fits: 3.5L V6 | ADP1909 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| ELRING Fits: 3.5L V6 | 243600 | 🇺🇸 US 🇨🇦 CA | Material: Aluminium | View on Amazon |
| ULTRA-POWER Fits: 3.5L V6 | 095015 | 🇺🇸 US 🇨🇦 CA | ID: 0.572"aluminum Gasket | View on Amazon |
This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
6 Oil Drain Plug Gasket parts for the 2014 Acura TL come from 6 brands — DORMAN, FEL-PRO, AJUSA and 3 other brands. The "Popular" part is DORMAN 095144.
This group includes DORMAN 095144, FEL-PRO 73346 and AJUSA 22007400 and the remaining parts above.
Oil Filler Cap
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CALORSTAT Fits: 3.5L V6 | OC2335 | 🇺🇸 US 🇨🇦 CA | Round with Handlewith OE No. 15610REZA00 | View on Amazon |
| DORMAN Fits: 3.5L V6 | 80985 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| GATES Fits: 3.5L V6 | 31284 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| MOTORAD Fits: 3.5L V6 | MO159 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the caps on the oil filler neck.
4 Oil Filler Cap parts are listed for the 2014 Acura TL, from CALORSTAT, DORMAN, GATES and 1 other brand.
Listed part numbers: CALORSTAT OC2335, DORMAN 80985 and GATES 31284, plus the other parts above.
Oil Filter
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BOSCH Fits: 3.5L V6 | 72226WS | 🇺🇸 US 🇨🇦 CA | Workshop Oil Filter | View on Amazon |
| FRAM Fits: 3.5L V6 | FE7317 | 🇺🇸 US 🇨🇦 CA | Spin-OnTough Guard or Synthetic Endurance | View on Amazon |
| FVP Fits: 3.5L V6 | R7356 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| PRO-TEC Fits: 3.5L V6 | PXL57356 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| VARIOUS MFR Fits: 3.5L V6 | PG4612 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| VARIOUS MFR Fits: 3.5L V6 | PO4610HN1 | 🇺🇸 US 🇨🇦 CA | OE Style | View on Amazon |
High Performance / Heavy Duty
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WIX Popular Fits: 3.5L V6 | 57356XP | 🇺🇸 US 🇨🇦 CA | XP Extreme DutyBest for Synthetic Motor Oils | View on Amazon |
| MOBIL Fits: 3.5L V6 | M1110A | 🇺🇸 US 🇨🇦 CA | Extended Performance | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BOSCH Popular Fits: 3.5L V6 | 3323 | 🇺🇸 US 🇨🇦 CA | Premium Oil Filter | View on Amazon |
| DENSO Popular Fits: 3.5L V6 | 1502006 | 🇺🇸 US 🇨🇦 CA | Engine Oil Filter or FTF Engine Oil Filter | View on Amazon |
| WIX Popular Fits: 3.5L V6 | 57356 | 🇺🇸 US 🇨🇦 CA | Bypass Relief Valve Setting: 8-11 PSI | View on Amazon |
| ACKOJA Fits: 3.5L V6 | A260500 | 🇺🇸 US 🇨🇦 CA | with OE No. 15400PLMA01 | View on Amazon |
| BECK/ARNLEY Fits: 3.5L V6 | 0410812 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| HASTINGS / BALDWIN Fits: 3.5L V6 | LF240 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| MAHLE / CLEVITE Fits: 3.5L V6 | OC707 | 🇺🇸 US 🇨🇦 CA | Spin-On86.00mm Height | View on Amazon |
| MANN Fits: 3.5L V6 | W6103 | 🇺🇸 US 🇨🇦 CA | Anti-Drain Back Valve: NoHeight: 3.54 In | View on Amazon |
| MOTORCRAFT Fits: 3.5L V6 | FL816 | 🇺🇸 US 🇨🇦 CA | Synthetic Oil Application | View on Amazon |
| VARIOUS MFR Fits: 3.5L V6 | PG4612EX | 🇺🇸 US 🇨🇦 CA | Extended Life | View on Amazon |
This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.
18 Oil Filter parts are listed for the 2014 Acura TL, from VARIOUS MFR, BOSCH, WIX and 11 other brands. WIX 57356XP carries the "Popular" badge.
Economy: 6 parts, from VARIOUS MFR, BOSCH, FRAM and 2 other brands. A representative part number is BOSCH 72226WS.
In the High Performance / Heavy Duty grade, WIX and MOBIL supply 2 parts: grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. A representative part number is WIX 57356XP.
The Standard Replacement section: 10 options from BOSCH, DENSO, WIX and 7 other brands. BOSCH 3323 is listed in this group.
Oil Filter Adapter Gasket / O-Ring
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| APEX Fits: 3.5L V6 | AOM6025 | 🇺🇸 US 🇨🇦 CA | with Screen | View on Amazon |
| FEL-PRO Fits: 3.5L V6 | 73040 | 🇺🇸 US 🇨🇦 CA | with VTEC Solenoid Seals Included | View on Amazon |
| FEL-PRO Fits: 3.5L V6 | 72951 | 🇺🇸 US 🇨🇦 CA | with VTEC Solenoid Seals Included | View on Amazon |
| VICTOR REINZ Fits: 3.5L V6 | 711460500 | 🇺🇸 US 🇨🇦 CA | Replaces OE Part Number(s) 15302-RDV-J001 | View on Amazon |
This table covers the Oil Filter Adapter Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove.
4 Oil Filter Adapter Gasket / O-Ring parts for the 2014 Acura TL come from 3 brands — FEL-PRO, APEX and VICTOR REINZ.
Part numbers include APEX AOM6025, FEL-PRO 73040 and FEL-PRO 72951, among others listed above.
Oil Filter Support Tube
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AUTOTECNICA Fits: 3.5L V6 | HA1416938 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Oil Filter Support tubes.
This group shows a single part: AUTOTECNICA HA1416938.
Oil Pan
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACKOJA Fits: 3.5L V6 | A260108 | 🇺🇸 US 🇨🇦 CA | with OE No. 11200RN0A01 | View on Amazon |
| ATP Fits: 3.5L V6 | 103652 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| DORMAN Fits: 3.5L V6 | 264380 | 🇺🇸 US 🇨🇦 CA | 17" Length, 4.5" Depth, 11" Width | View on Amazon |
| SKP Fits: 3.5L V6 | SK264380 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| SPECTRA PREMIUM Fits: 3.5L V6 | HOP20A | 🇺🇸 US 🇨🇦 CA | with Crankshaft Sensor Port | View on Amazon |
This table covers the oil pans that hold the engine's oil sump.
5 Oil Pan parts for the 2014 Acura TL come from 5 brands — ACKOJA, ATP, DORMAN and 2 other brands.
This group includes ACKOJA A260108, ATP 103652 and DORMAN 264380 and the remaining parts above.
Oil Pan Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Fits: 3.5L V6 | OS30954T | 🇺🇸 US 🇨🇦 CA | Permadryplus with Speedfit | View on Amazon |
| VICTOR REINZ Fits: 3.5L V6 | 703141410 | 🇺🇸 US 🇨🇦 CA | RTV Silicone | View on Amazon |
This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
2 Oil Pan Gasket parts are listed for the 2014 Acura TL, from FEL-PRO and VICTOR REINZ.
Part numbers include FEL-PRO OS30954T and VICTOR REINZ 703141410.
Oil Pressure Sender / Switch Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Fits: 3.5L V6 | 73196 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| JAPANESE OE Fits: 3.5L V6 | 91319PAAA01 | 🇺🇸 US 🇨🇦 CA | Genuine (OE) | View on Amazon |
This table covers the seals at the Oil Pressure Sender / Switch. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
2 Oil Pressure Sender / Switch Seal parts are listed for the 2014 Acura TL, from FEL-PRO and JAPANESE OE.
This group includes FEL-PRO 73196 and JAPANESE OE 91319PAAA01.
Oil Pump
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SKP Popular Fits: 3.5L V6 | SKPM531 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| ENGINETECH Fits: 3.5L V6 | EPK168 | 🇺🇸 US | 'Pressure King' Value Line Pump | View on Amazon |
| ULTRA-POWER Fits: 3.5L V6 | M531 | 🇺🇸 US 🇨🇦 CA | Standard Volume & Pressure | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MELLING Popular Fits: 3.5L V6 | M531 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| ITM ENGINE COMPONENTS Fits: 3.5L V6 | 0571193 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| ITM ENGINE COMPONENTS Fits: 3.5L V6 | 289420 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| TOPLINE Fits: 3.5L V6 | OPH51 | 🇺🇸 US 🇨🇦 CA | Kit | View on Amazon |
This table covers the Oil pumps. Typical signs include noise from the pump, no pressure, or fluid that never arrives at the outlet. Prime or fill the pump as the notes require. A dry start is a common way to kill a new unit.
7 Oil Pump parts are listed for the 2014 Acura TL, from ITM ENGINE COMPONENTS, SKP, ENGINETECH and 3 other brands. SKP SKPM531 carries the "Popular" badge.
Economy: 3 parts, from SKP, ENGINETECH and ULTRA-POWER. A representative part number is SKP SKPM531.
The Standard Replacement section: 4 options from ITM ENGINE COMPONENTS, MELLING and TOPLINE. MELLING M531 is listed in this group.
This group includes SKP SKPM531, ENGINETECH EPK168 and ULTRA-POWER M531 and the remaining parts above.
Oil Pump Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 3.5L V6 | 01130500 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| ELRING Fits: 3.5L V6 | 967650 | 🇺🇸 US 🇨🇦 CA | Engine Side | View on Amazon |
This table covers the gaskets that seal the Oil Pump. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
2 Oil Pump Gasket parts for the 2014 Acura TL come from 2 brands — AJUSA and ELRING.
Listed part numbers: AJUSA 01130500 and ELRING 967650.
Oil Pump Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BCA Fits: 3.5L V6 | NS711181 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| JAPANESE OE Fits: 3.5L V6 | A6629 | 🇺🇸 US 🇨🇦 CA | Musashi | View on Amazon |
| NATIONAL Fits: 3.5L V6 | 711181 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| WJB / INMOTION PARTS Fits: 3.5L V6 | WS711181 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the seals at the Oil Pump. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
4 Oil Pump Seal parts for the 2014 Acura TL come from 4 brands — BCA, JAPANESE OE, NATIONAL and 1 other brand.
This group includes BCA NS711181, JAPANESE OE A6629 and NATIONAL 711181 and the remaining parts above.
Piston Ring
Premium
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Popular Fits: 3.5L V6 | S89416 | 🇺🇸 US | Steel Top PremiumSet | View on Amazon |
| MAHLE / CLEVITE Fits: 3.5L V6 | 42250CP | 🇺🇸 US 🇨🇦 CA | PremiumMaterial Stainless Steel / Ductile Iron / Stainless Steel | View on Amazon |
| SEALED POWER Fits: 3.5L V6 | E985KC | 🇺🇸 US 🇨🇦 CA | PremiumRing Groove Widths: 1.2mm, 1.2mm, 2.8mm | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| HASTINGS MANUFACTURING Popular Fits: 3.5L V6 | 2C4972 | 🇺🇸 US 🇨🇦 CA | Full SetTop Groove: 1.20 mm | View on Amazon |
| HASTINGS MANUFACTURING Fits: 3.5L V6 | 2C4972S | 🇺🇸 US 🇨🇦 CA | Chrome Top Ring1 Cylinder Set | View on Amazon |
| ITM ENGINE COMPONENTS Fits: 3.5L V6 | 0216716 | 🇺🇸 US 🇨🇦 CA | Set1.2 X 1.2 X 2.8mm | View on Amazon |
This table covers the rings that seal each piston to the cylinder wall.
6 Piston Ring parts for the 2014 Acura TL come from 5 brands — HASTINGS MANUFACTURING, ENGINETECH, MAHLE / CLEVITE and 2 other brands. The "Popular" part is ENGINETECH S89416.
In the Premium grade, ENGINETECH, MAHLE / CLEVITE and SEALED POWER supply 3 parts: a step above OE specification in materials, tolerances or warranty terms. A representative part number is ENGINETECH S89416.
Standard Replacement: 3 parts, from HASTINGS MANUFACTURING and ITM ENGINE COMPONENTS. A representative part number is HASTINGS MANUFACTURING 2C4972.
Listed part numbers: ENGINETECH S89416, MAHLE / CLEVITE 42250CP and SEALED POWER E985KC, plus the other parts above.
Thrust Washer
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Fits: 3.5L V6 | TW1537 | 🇺🇸 US | (Size: Standard) | View on Amazon |
| ITM ENGINE COMPONENTS Fits: 3.5L V6 | 1T4450 | 🇺🇸 US 🇨🇦 CA | (Size: Standard) | View on Amazon |
| KING ENGINE BEARINGS Fits: 3.5L V6 | TW1015SI | 🇺🇸 US 🇨🇦 CA | BI-Metal (aluminum silicon base) | View on Amazon |
| MAHLE / CLEVITE Fits: 3.5L V6 | TW712S | 🇺🇸 US 🇨🇦 CA | Position: 3 | View on Amazon |
This table covers the Thrust washers.
4 Thrust Washer parts are listed for the 2014 Acura TL, from ENGINETECH, ITM ENGINE COMPONENTS, KING ENGINE BEARINGS and 1 other brand.
This group includes ENGINETECH TW1537, ITM ENGINE COMPONENTS 1T4450 and KING ENGINE BEARINGS TW1015SI and the remaining parts above.
Timing Belt
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Fits: 3.5L V6 | B329 | 🇺🇸 US 🇨🇦 CA | Camshaft | View on Amazon |
| SKP Fits: 3.5L V6 | SKT329 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
High Performance
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GATES Fits: 3.5L V6 | T329RB | 🇺🇸 US 🇨🇦 CA | High Performance | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BANDO Popular Fits: 3.5L V6 | TB329 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| GATES Popular Fits: 3.5L V6 | T329 | 🇺🇸 US 🇨🇦 CA | Power Grip | View on Amazon |
| ACDELCO Fits: 3.5L V6 | TB329 | 🇺🇸 US 🇨🇦 CA | Professional / Gold | View on Amazon |
| CONTINENTAL Fits: 3.5L V6 | 40329 | 🇺🇸 US 🇨🇦 CA | Import | View on Amazon |
| DAYCO Fits: 3.5L V6 | 95329 | 🇺🇸 US 🇨🇦 CA | Camshaft | View on Amazon |
| PREFERRED COMPONENTS INC Fits: 3.5L V6 | B329 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Timing belts. Typical signs include squeal on cold start, cracked ribs, or glazing. Spin the tensioner and idlers by hand while the belt is off.
9 Timing Belt parts for the 2014 Acura TL come from 8 brands — GATES, CLOYES, SKP and 5 other brands. The "Popular" part is BANDO TB329.
The Economy section: 2 options from CLOYES and SKP. CLOYES B329 is listed in this group.
The High Performance section: 1 option from GATES. GATES T329RB is listed in this group.
Standard Replacement: 6 parts, from BANDO, GATES, ACDELCO and 3 other brands. A representative part number is BANDO TB329.
Listed part numbers: BANDO TB329, CLOYES B329 and SKP SKT329, plus the other parts above.
Timing Belt & Component Kit
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Popular Fits: 3.5L V6 | BK329 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| CONTINENTAL Fits: 3.5L V6 | GTKWP329 | 🇺🇸 US 🇨🇦 CA | Black SeriesIncludes Aluminum Hydraulic Tensioner | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACDELCO Popular Fits: 3.5L V6 | TCKWP329 | 🇺🇸 US 🇨🇦 CA | Professional / Goldwith Water Pump | View on Amazon |
| AISIN Popular Fits: 3.5L V6 | TKH002 | 🇺🇸 US 🇨🇦 CA | Kit Contains Japan or US Manufactured Water Pump | View on Amazon |
| CONTINENTAL Popular Fits: 3.5L V6 | PP329LK2 | 🇺🇸 US 🇨🇦 CA | Pro Series PLUSIncludes hydraulic tensioner and seals | View on Amazon |
| ACDELCO Fits: 3.5L V6 | TCK329 | 🇺🇸 US 🇨🇦 CA | Professional / Gold | View on Amazon |
| AISIN Fits: 3.5L V6 | TKH002KR | 🇺🇸 US 🇨🇦 CA | Kit Contains Korean Manufactured Water Pump | View on Amazon |
| CONTINENTAL Fits: 3.5L V6 | TB329K1 | 🇺🇸 US 🇨🇦 CA | Kit | View on Amazon |
| CONTINENTAL Fits: 3.5L V6 | TB329LK2 | 🇺🇸 US 🇨🇦 CA | Pro SeriesDoes Not include seals | View on Amazon |
| DAYCO Fits: 3.5L V6 | 95329K2 | 🇺🇸 US 🇨🇦 CA | KitIncludes: Timing Belt, Camshaft Belt Tensioner, Camshaft Belt Idler (Hydraulic Actuator Not Included), Shim, Bolt | View on Amazon |
| DAYCO Fits: 3.5L V6 | WP329K2A | 🇺🇸 US 🇨🇦 CA | Includes: Water Pump, Timing Belt, Hydraulic Timing Belt Actuator, Camshaft Belt Tensioner, Camshaft Belt Idler, Shim, Bolt | View on Amazon |
| GATES Fits: 3.5L V6 | TCK329 | 🇺🇸 US 🇨🇦 CA | Power Grip | View on Amazon |
| GATES Fits: 3.5L V6 | TCKWP329 | 🇺🇸 US 🇨🇦 CA | Power Gripwith Water Pump | View on Amazon |
| GMB Fits: 3.5L V6 | 24350329 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| GMB Fits: 3.5L V6 | 34350329 | 🇺🇸 US 🇨🇦 CA | Includes Water Pump | View on Amazon |
| ITM ENGINE COMPONENTS Fits: 3.5L V6 | ITM329 | 🇺🇸 US 🇨🇦 CA | Includes Seals | View on Amazon |
This table covers the Timing Belt & component kits.
16 Timing Belt & Component Kit parts are listed for the 2014 Acura TL, from CONTINENTAL, ACDELCO, AISIN and 5 other brands. CLOYES BK329 carries the "Popular" badge.
Economy: 2 parts, from CLOYES and CONTINENTAL. A representative part number is CLOYES BK329.
The Standard Replacement section: 14 options from CONTINENTAL, ACDELCO, AISIN and 4 other brands. ACDELCO TCKWP329 is listed in this group.
Timing Belt Pulley
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Fits: 3.5L V6 | 95508 | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
| FVP Fits: 3.5L V6 | 95508 | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
This table covers the Timing Belt pulleys. Typical signs include a growl or chirp that follows engine speed, or a pulley that will not spin freely by hand. Spin each pulley with the belt off. Roughness or play means replace it with the belt.
2 Timing Belt Pulley parts are listed for the 2014 Acura TL, from CLOYES and FVP.
This group includes CLOYES 95508 and the remaining parts above.
Timing Belt Tensioner
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AISIN Popular Fits: 3.5L V6 | BTH001 | 🇺🇸 US 🇨🇦 CA | Hydraulic Assembly | View on Amazon |
| DAYCO Popular Fits: 3.5L V6 | 85067 | 🇺🇸 US 🇨🇦 CA | Hydraulic Assembly | View on Amazon |
| GMB Popular Fits: 3.5L V6 | 4355767 | 🇺🇸 US 🇨🇦 CA | Hydraulic Assembly | View on Amazon |
| ACDELCO Fits: 3.5L V6 | T43129 | 🇺🇸 US 🇨🇦 CA | Professional / GoldHydraulic Assembly | View on Amazon |
| ACDELCO Fits: 3.5L V6 | T41231 | 🇺🇸 US 🇨🇦 CA | Professional / GoldSteel Smooth/Backside (55mm x 8mm x 24mm) - with Bolt, Nut | View on Amazon |
| AUTOTECNICA Fits: 3.5L V6 | HA1413164 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| DAYCO Fits: 3.5L V6 | 84209 | 🇺🇸 US 🇨🇦 CA | Includes: Camshaft Belt Tensioner, Camshaft Belt Idler (Hydraulic Actuator Not Included), Supercedes 84123Includes: Camshaft Belt Tensioner, Camshaft Belt Idler (Hydraulic Actuator Not Included), without Belt | View on Amazon |
| ENGINETECH Fits: 3.5L V6 | TT508 | 🇺🇸 US | Bearing and pivot assembly | View on Amazon |
| GATES Fits: 3.5L V6 | T41231 | 🇺🇸 US 🇨🇦 CA | Steel Smooth/Backside (55mm x 8mm x 24mm) - with Bolt, Nut | View on Amazon |
| GATES Fits: 3.5L V6 | T43129 | 🇺🇸 US 🇨🇦 CA | Hydraulic AssemblyNo Pulley Attached | View on Amazon |
| GMB Fits: 3.5L V6 | 4359760 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| HONDA Fits: 3.5L V6 | 14520RCAA01 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| SKP Fits: 3.5L V6 | SK85019 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Timing Belt tensioners. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage.
13 Timing Belt Tensioner parts are listed for the 2014 Acura TL, from DAYCO, GMB, ACDELCO and 6 other brands. AISIN BTH001 carries the "Popular" badge.
Timing Cover Dust Seal Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE Fits: 3.5L V6 | JV5273 | 🇺🇸 US 🇨🇦 CA | Timing Cover Dust Seal KitMolded Rubber | View on Amazon |
This table covers the Timing Cover Dust Seal sets.
One part is listed for the 2014 Acura TL — MAHLE / CLEVITE JV5273.
Timing Cover Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Fits: 3.5L V6 | TCS46026 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| MAHLE / CLEVITE Fits: 3.5L V6 | JV5086 | 🇺🇸 US 🇨🇦 CA | Includes Seal and GasketsSet | View on Amazon |
| ULTRA-POWER Fits: 3.5L V6 | JV5086 | 🇺🇸 US 🇨🇦 CA | Timing Cover Gasket Set | View on Amazon |
This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
3 Timing Cover Gasket parts are listed for the 2014 Acura TL, from FEL-PRO, MAHLE / CLEVITE and ULTRA-POWER.
Part numbers include FEL-PRO TCS46026 and MAHLE / CLEVITE JV5086, among others listed above.
Timing Cover Repair Sleeve
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SKF Fits: 3.5L V6 | 99169 | 🇺🇸 US 🇨🇦 CA | Shaft Diameter: 1.654 In | View on Amazon |
This table covers the wear sleeves used to restore a Timing Cover seal surface.
One part is listed for the 2014 Acura TL — SKF 99169.
Timing Cover Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACDELCO Fits: 3.5L V6 | 711181 | 🇺🇸 US 🇨🇦 CA | Gold | View on Amazon |
| AISIN Fits: 3.5L V6 | SKH005 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| SCHAEFFLER Fits: 3.5L V6 | SS2705 | 🇺🇸 US 🇨🇦 CA | Front7 MM Width | View on Amazon |
| SKF Fits: 3.5L V6 | 16473 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
4 Timing Cover Seal parts are listed for the 2014 Acura TL, from ACDELCO, AISIN, SCHAEFFLER and 1 other brand.
This group includes ACDELCO 711181, AISIN SKH005 and SCHAEFFLER SS2705 and the remaining parts above.
Timing Idler
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Popular Fits: 3.5L V6 | 15011 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| GMB Popular Fits: 3.5L V6 | 4359730 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| CLOYES Fits: 3.5L V6 | 95509 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| ENGINETECH Fits: 3.5L V6 | TT509 | 🇺🇸 US | View on Amazon | |
| GATES Fits: 3.5L V6 | T41232 | 🇺🇸 US 🇨🇦 CA | Timing Belt PulleySteel Smooth/Backside (55mm x 19mm x 24mm) | View on Amazon |
| JAPANESE OE Fits: 3.5L V6 | PU315521RR1D | 🇺🇸 US 🇨🇦 CA | Koyo | View on Amazon |
| SKP Fits: 3.5L V6 | SKT41232 | 🇺🇸 US 🇨🇦 CA | Interference engine application | View on Amazon |
| ULTRA-POWER Fits: 3.5L V6 | T41232 | 🇺🇸 US 🇨🇦 CA | Timing Idler or PulleyIdler | View on Amazon |
This table covers the Timing idlers. Typical signs include a chirp that follows engine speed, or an idler that feels rough or has play. Replace a noisy idler with the belt — the labor is already paid for.
8 Timing Idler parts are listed for the 2014 Acura TL, from DORMAN, GMB, CLOYES and 5 other brands. DORMAN 15011 carries the "Popular" badge.
Part numbers include DORMAN 15011, GMB 4359730 and CLOYES 95509, among others listed above.
Valve Cover
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| APEX Popular Fits: 3.5L V6 | VCS169R | 🇺🇸 US 🇨🇦 CA | Includes Gasket | View on Amazon |
| DORMAN Popular Fits: 3.5L V6 | 264490 | 🇺🇸 US 🇨🇦 CA | Rear | View on Amazon |
| APEX Fits: 3.5L V6 | VCS169L | 🇺🇸 US 🇨🇦 CA | Includes Gasket | View on Amazon |
| AUTOTECNICA Fits: 3.5L V6 | HA1418205 | 🇺🇸 US 🇨🇦 CA | FrontAluminum | View on Amazon |
| AUTOTECNICA Fits: 3.5L V6 | HA1416703 | 🇺🇸 US 🇨🇦 CA | RearAluminum | View on Amazon |
| DORMAN Fits: 3.5L V6 | 264491 | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
| SKP Fits: 3.5L V6 | SK264491 | 🇺🇸 US 🇨🇦 CA | Front | View on Amazon |
This table covers the Valve covers.
7 Valve Cover parts for the 2014 Acura TL come from 4 brands — APEX, DORMAN, AUTOTECNICA and 1 other brand. The "Popular" part is APEX VCS169R.
This group includes APEX VCS169R, DORMAN 264490 and APEX VCS169L and the remaining parts above.
Valve Cover Bolt Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| JAPANESE OE Fits: 3.5L V6 | KF811183 | 🇺🇸 US 🇨🇦 CA | Includes HybridKP | View on Amazon |
This table covers the seals at the Valve Cover Bolt. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
This group shows a single part: JAPANESE OE KF811183.
Valve Cover Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BECK/ARNLEY Popular Fits: 3.5L V6 | 0361849 | 🇺🇸 US 🇨🇦 CA | Includes spark plug tube seals and grommets | View on Amazon |
| BECK/ARNLEY Popular Fits: 3.5L V6 | 0361848 | 🇺🇸 US 🇨🇦 CA | Includes spark plug tube seals and grommets | View on Amazon |
| FEL-PRO Popular Fits: 3.5L V6 | VS50773R | 🇺🇸 US 🇨🇦 CA | Perma Dry Molded RubberIncludes Spark Plug Tube Seals and Valve Cover Grommets | View on Amazon |
| APEX Fits: 3.5L V6 | AVC169S | 🇺🇸 US 🇨🇦 CA | Includes Grommets & Spark Plug Tube Seals | View on Amazon |
| ELRING Fits: 3.5L V6 | 948730 | 🇺🇸 US 🇨🇦 CA | For aluminium cylinder head coverMaterial: Polyacrylate Rubber (ACM) | View on Amazon |
| ELRING Fits: 3.5L V6 | 948740 | 🇺🇸 US 🇨🇦 CA | For aluminium cylinder head coverMaterial: Polyacrylate Rubber (ACM) | View on Amazon |
| ELRING Fits: 3.5L V6 | 574940 | 🇺🇸 US 🇨🇦 CA | For aluminium cylinder head coverMaterial: Multiple | View on Amazon |
| ELRING Fits: 3.5L V6 | 574950 | 🇺🇸 US 🇨🇦 CA | For aluminium cylinder head coverMaterial: Zinc-Copper brazing alloy (ZN-CU) | View on Amazon |
| ITM ENGINE COMPONENTS Fits: 3.5L V6 | 0930003 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| MAHLE / CLEVITE Fits: 3.5L V6 | VS50558 | 🇺🇸 US 🇨🇦 CA | SetMolded Rubber | View on Amazon |
| VICTOR REINZ Fits: 3.5L V6 | 151081801 | 🇺🇸 US 🇨🇦 CA | SetIncludes Grommets and Spark Plug Tube Seals | View on Amazon |
This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
11 Valve Cover Gasket parts are listed for the 2014 Acura TL, from ELRING, BECK/ARNLEY, FEL-PRO and 4 other brands. BECK/ARNLEY 0361849 carries the "Popular" badge.
Valve Cover Grommet
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BECK/ARNLEY Fits: 3.5L V6 | 0396614 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| ELRING Fits: 3.5L V6 | 948370 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Valve Cover grommets.
2 Valve Cover Grommet parts are listed for the 2014 Acura TL, from BECK/ARNLEY and ELRING.
Listed part numbers: BECK/ARNLEY 0396614 and ELRING 948370.
Valve Guide
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SBI Popular Fits: 3.5L V6 | 1408157 | 🇺🇸 US 🇨🇦 CA | Exhaust0.2173 I.D. | View on Amazon |
| QUALCAST Fits: 3.5L V6 | 308157 | 🇺🇸 US 🇨🇦 CA | Exhaust2.130 Overall Length. 0.436 Outside Diameter | View on Amazon |
| SBI Fits: 3.5L V6 | 1408158 | 🇺🇸 US 🇨🇦 CA | Intake0.2173 I.D. | View on Amazon |
| TOPLINE Fits: 3.5L V6 | EVGH21 | 🇺🇸 US 🇨🇦 CA | Exhaust | View on Amazon |
| TOPLINE Fits: 3.5L V6 | IVGH21 | 🇺🇸 US 🇨🇦 CA | Intake | View on Amazon |
This table covers the pressed-in bronze and cast-iron guides that align valve stems. Typical signs include oil smoke on startup, a guide that has gone oval, or a valve that no longer seats quietly. Guides are a machine-shop fit. Confirm stem diameter in the notes before ordering.
5 Valve Guide parts are listed for the 2014 Acura TL, from SBI, TOPLINE and QUALCAST. SBI 1408157 carries the "Popular" badge.
Part numbers include SBI 1408157, QUALCAST 308157 and SBI 1408158, among others listed above.
Valve Spring
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MELLING Fits: 3.5L V6 | VS2268 | 🇺🇸 US 🇨🇦 CA | Exhaust | View on Amazon |
| MELLING Fits: 3.5L V6 | VS2264 | 🇺🇸 US 🇨🇦 CA | Intake | View on Amazon |
This table covers the springs that close each intake and exhaust valve. Typical signs include a sagging corner, a broken coil, or a clunk from the spring pocket. Replace springs in axle pairs and inspect the seats.
2 Valve Spring parts for the 2014 Acura TL come from MELLING.
This group includes MELLING VS2268 and MELLING VS2264.
Valve Spring Retainer Keeper
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MELLING Fits: 3.5L V6 | VL1060 | 🇺🇸 US 🇨🇦 CA | Valve Stem Diameter: 0.215 in | View on Amazon |
| QUALCAST Fits: 3.5L V6 | 345008 | 🇺🇸 US 🇨🇦 CA | 1 Round Groove. 0.215 Stem DIA. | View on Amazon |
| SBI Fits: 3.5L V6 | 1211060 | 🇺🇸 US 🇨🇦 CA | Intake and Exhaust0.2190 Length | View on Amazon |
This table covers the keepers that lock each valve-spring retainer to the stem.
3 Valve Spring Retainer Keeper parts for the 2014 Acura TL come from 3 brands — MELLING, QUALCAST and SBI.
Part numbers include MELLING VL1060, QUALCAST 345008 and SBI 1211060.
Valve Stem Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ENGINETECH Popular Fits: 3.5L V6 | S592V | 🇺🇸 US | VitonIntake and Exhaust | View on Amazon |
| FEL-PRO Popular Fits: 3.5L V6 | SS702832 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| MAHLE / CLEVITE Popular Fits: 3.5L V6 | SS45626 | 🇺🇸 US 🇨🇦 CA | SetMetal with Molded Rubber | View on Amazon |
| APEX Fits: 3.5L V6 | AVS1028 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| ELRING Fits: 3.5L V6 | 130860 | 🇺🇸 US 🇨🇦 CA | Colour: BlackMaterial: FPM (fluoride rubber) | View on Amazon |
| ELRING Fits: 3.5L V6 | 427370 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| ELRING Fits: 3.5L V6 | 130560 | 🇺🇸 US 🇨🇦 CA | Colour: GreenHeight [MM]: 10 | View on Amazon |
| QUALCAST Fits: 3.5L V6 | 3859255 | 🇺🇸 US 🇨🇦 CA | Viton Metal Clad | View on Amazon |
| SBI Fits: 3.5L V6 | 1221201 | 🇺🇸 US 🇨🇦 CA | IntakeViton Material | View on Amazon |
| SBI Fits: 3.5L V6 | 1221202 | 🇺🇸 US 🇨🇦 CA | ExhaustViton Material | View on Amazon |
| TOPLINE Fits: 3.5L V6 | VSSH21 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| VICTOR REINZ Fits: 3.5L V6 | 121013301 | 🇺🇸 US 🇨🇦 CA | SetContains 12 Pieces | View on Amazon |
This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
12 Valve Stem Seal parts are listed for the 2014 Acura TL, from ELRING, SBI, ENGINETECH and 6 other brands. ENGINETECH S592V carries the "Popular" badge.
Variable Valve Timing (VVT) Solenoid / Actuator
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Popular Fits: 3.5L V6 | 916866 | 🇺🇸 US 🇨🇦 CA | At Oil Filter AdapterSolenoid Only | View on Amazon |
| DORMAN Popular Fits: 3.5L V6 | 916606 | 🇺🇸 US 🇨🇦 CA | At Oil Filter AdapterSpool Valve Assembly | View on Amazon |
| GATES Fits: 3.5L V6 | VVS313 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| HOLSTEIN Fits: 3.5L V6 | 2VTS0132 | 🇺🇸 US 🇨🇦 CA | Solenoid Valve | View on Amazon |
| ROSTRA Fits: 3.5L V6 | 790070 | 🇺🇸 US 🇨🇦 CA | Located at Oil Filter Adapter | View on Amazon |
| ULTRA-POWER Fits: 3.5L V6 | VVT234 | 🇺🇸 US 🇨🇦 CA | Timing SolenoidVARIABLE TIMING SOLENOID | View on Amazon |
| WALKER PRODUCTS Fits: 3.5L V6 | 5901130 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ACKOJA Fits: 3.5L V6 | A260341 | 🇺🇸 US 🇨🇦 CA | Oil Control | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: 3.5L V6 | VVT234 | 🇺🇸 US 🇨🇦 CA | Solenoid only | View on Amazon |
This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same.
9 Variable Valve Timing (VVT) Solenoid / Actuator parts are listed for the 2014 Acura TL, from DORMAN, GATES, HOLSTEIN and 5 other brands. DORMAN 916866 carries the "Popular" badge.
Economy: 7 parts, from DORMAN, GATES, HOLSTEIN and 3 other brands. A representative part number is DORMAN 916866.
The Standard Replacement section: 2 options from ACKOJA and STANDARD MOTOR PRODUCTS. ACKOJA A260341 is listed in this group.
Listed part numbers: DORMAN 916866, DORMAN 916606 and GATES VVS313, plus the other parts above.
Variable Valve Timing (VVT) Solenoid Filter
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GATES Popular Fits: 3.5L V6 | VVS902 | 🇺🇸 US 🇨🇦 CA | Spool Valve Gasket & Filter | View on Amazon |
| VICTOR REINZ Popular Fits: 3.5L V6 | 711544500 | 🇺🇸 US 🇨🇦 CA | Oil Filter AdapterMolded Rubber Design with Screen | View on Amazon |
| AJUSA Fits: 3.5L V6 | 01130600 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| BECK/ARNLEY Fits: 3.5L V6 | 0396625 | 🇺🇸 US 🇨🇦 CA | UPPERVTEC Solenoid Gasket | View on Amazon |
| BECK/ARNLEY Fits: 3.5L V6 | 0396619 | 🇺🇸 US 🇨🇦 CA | LOWERVTEC Solenoid Gasket | View on Amazon |
| JAPANESE OE Fits: 3.5L V6 | 15825P8AA01 | 🇺🇸 US 🇨🇦 CA | Keihin | View on Amazon |
| MAHLE / CLEVITE Fits: 3.5L V6 | B31938 | 🇺🇸 US 🇨🇦 CA | Variable Valve Timing (VVT) Solenoid GasketMolded Rubber | View on Amazon |
| WALKER PRODUCTS Fits: 3.5L V6 | 5904006 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Variable Valve Timing (VVT) Solenoid filters. Typical signs include restricted flow — long cranking, weak airflow, or dirty fluid after a short interval. Seat the new filter so it cannot bypass, and use the grade the notes call for.
8 Variable Valve Timing (VVT) Solenoid Filter parts are listed for the 2014 Acura TL, from BECK/ARNLEY, GATES, VICTOR REINZ and 4 other brands. GATES VVS902 carries the "Popular" badge.
Part numbers include GATES VVS902, VICTOR REINZ 711544500 and AJUSA 01130600, among others listed above.
Variable Valve Timing (VVT) Solenoid Gasket / Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Popular Fits: 3.5L V6 | 917171 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| AJUSA Fits: 3.5L V6 | 01130400 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| AJUSA Fits: 3.5L V6 | 01140000C | 🇺🇸 US 🇨🇦 CA | Kit | View on Amazon |
| ELRING Fits: 3.5L V6 | 464360 | 🇺🇸 US 🇨🇦 CA | Includes Strainer | View on Amazon |
| ULTRA-POWER Fits: 3.5L V6 | B31938 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the seals at the Variable Valve Timing (VVT) Solenoid Gasket. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
5 Variable Valve Timing (VVT) Solenoid Gasket / Seal parts for the 2014 Acura TL come from 4 brands — AJUSA, DORMAN, ELRING and 1 other brand. The "Popular" part is DORMAN 917171.
Part numbers include DORMAN 917171, AJUSA 01130400 and AJUSA 01140000C, among others listed above.
Buying Engine Parts for a 2014 Acura TL
On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.
- Match the engine first. Every engine part here is engine-specific; each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Oil and Crankshaft Seal .
Frequently Asked Questions
How many engine parts fit the 2014 Acura TL?
Our catalog currently lists 362 engine parts for the 2014 Acura TL across 57 subcategories and 71 brands, covering both the 3.5L V6 and the 3.7L V6. Each part is matched to the engine(s) it fits.
Do engine parts differ between 2014 Acura TL engines?
Yes. Every engine part on this page is engine-specific. Each row shows which engine(s) it fits — use the filter at the top to hide the rest. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of engine problems on a 2014 Acura TL?
Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What oil viscosity is listed for the 2014 Acura TL?
Oil rows on this page include SAE 0W-20. Confirm the engine and the weight on the filler cap before you buy — high-mileage and standard fills can differ.
What should I replace at the same time?
Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2014 Acura TL was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2014 Acura TL?
First match the engine — each row shows which engine(s) the part fits. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2014 Acura TL
Engine Parts for Other Acura TL Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.