2019 BMW 330I Engine Parts

This table covers the Balance Shaft covers. Read more

This group shows a single part: DORMAN 926054.

This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

This group shows a single part: AJUSA 54303200.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

6 Crankshaft Seal parts are listed for the 2019 BMW 330I, from MAHLE / CLEVITE, VICTOR REINZ and AJUSA. MAHLE / CLEVITE 68102 carries the "Popular" badge.

This group includes MAHLE / CLEVITE 68102, VICTOR REINZ 813700200 and AJUSA 15075200 and the remaining parts above.

This table covers the bolts that clamp the cylinder head to the block. Read more

4 Cylinder Head Bolt parts for the 2019 BMW 330I come from 3 brands — VICTOR REINZ, AJUSA and MAHLE / CLEVITE.

Listed part numbers: AJUSA 81065000, MAHLE / CLEVITE GS33999 and VICTOR REINZ 141226102, plus the other parts above.

This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Cylinder Head Gasket parts for the 2019 BMW 330I come from 2 brands — MAHLE / CLEVITE and VICTOR REINZ. The "Popular" part is MAHLE / CLEVITE 55469.

Listed part numbers: MAHLE / CLEVITE 55469, MAHLE / CLEVITE 55535 and MAHLE / CLEVITE 55536, plus the other parts above.

This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

3 Cylinder Head Gasket Set parts for the 2019 BMW 330I come from 3 brands — AJUSA, MAHLE / CLEVITE and VICTOR REINZ.

This group includes AJUSA 52563000, MAHLE / CLEVITE HS55469 and VICTOR REINZ 021141101.

This table covers the Cylinder Head temperature sensors. Typical signs include hard cold starts, a fan that never comes on, or a gauge that disagrees with the scan tool. A sensor that reads open or shorted is usually the part; an implausible-but-smooth reading can be wiring. Read more

One part is listed for the 2019 BMW 330I — WELLS 5S16785.

This table covers the Engine covers. Read more

2 Engine Cover parts for the 2019 BMW 330I come from TECHPRO.

Listed part numbers: TECHPRO BM1228186 and TECHPRO BM1228190.

This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration. Read more

This group shows a single part: AJUSA 50516100.

This table covers the followers that drive a mechanical fuel pump off the camshaft. Read more

2 Fuel Pump Camshaft Follower parts for the 2019 BMW 330I come from 2 brands — ASTEMO / HITACHI and WELLS.

Listed part numbers: ASTEMO / HITACHI HCF3057 and WELLS 5T5004.

This table covers the crankshaft pulleys / harmonic balancers at the front of the engine. Read more

This group shows a single part: SKP SK8638446.

This table covers the Harmonic Balancer bolts. Read more

One part is listed for the 2019 BMW 330I — REIN HWB0074.

This table covers the Intake manifolds. Typical signs include an exhaust tick, a vacuum leak, or a gasket that has burned through. Replace the gaskets and hardware; a warped flange will leak with a new gasket alone. Read more

2 Intake Manifold parts are listed for the 2019 BMW 330I, from ÜRO PARTS and VAICO.

This group includes ÜRO PARTS 11618603914 and VAICO V204510.

This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

5 Intake Manifold Gasket parts for the 2019 BMW 330I come from 4 brands — VICTOR REINZ, MAHLE / CLEVITE, ELRING and 1 other brand. The "Popular" part is MAHLE / CLEVITE MS20465.

Listed part numbers: MAHLE / CLEVITE MS20465, ELRING 076500 and FEL-PRO MS97664, plus the other parts above.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

15 Motor Mount parts are listed for the 2019 BMW 330I, from ANCHOR, WESTAR, ÜRO PARTS and 3 other brands. ÜRO PARTS 22116856184 carries the "Popular" badge.

In the Economy grade, ÜRO PARTS supplies 2 parts: the catalog's value-priced group. A representative part number is ÜRO PARTS 22116856184.

The Standard Replacement section lists 13 options from ANCHOR, WESTAR, DEA / MARMON RIDE CONTROL and 2 other brands — built to original-equipment specification. ANCHOR 9983 is listed in this group.

This table covers the Motor Mount kits. Read more

One part is listed for the 2019 BMW 330I — ANCHOR 300486.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

6 Oil parts are listed for the 2019 BMW 330I, from LIQUI MOLY, PENTOSIN and VALVOLINE. LIQUI MOLY 22044 carries the "Popular" badge.

Listed part numbers: LIQUI MOLY 22044, LIQUI MOLY 22046 and LIQUI MOLY 22048, plus the other parts above.

This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant. Read more

6 Oil Cooler parts are listed for the 2019 BMW 330I, from MAHLE / CLEVITE, ÜRO PARTS, DORMAN and 2 other brands. MAHLE / CLEVITE CLC362000S carries the "Popular" badge.

Listed part numbers: MAHLE / CLEVITE CLC362000S, ÜRO PARTS 11428585624 and DORMAN 918910, plus the other parts above.

This table covers the gaskets that seal the Oil Cooler. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

3 Oil Cooler Gasket parts for the 2019 BMW 330I come from 3 brands — AJUSA, MAHLE / CLEVITE and VICTOR REINZ.

This group includes AJUSA 77031200, MAHLE / CLEVITE GS33990 and VICTOR REINZ 151004801.

This table covers the drain plugs in the oil pan. Read more

3 Oil Drain Plug parts are listed for the 2019 BMW 330I, from AGS, DORMAN and REIN.

This group includes AGS ODP00010, DORMAN 090088 and REIN HWU1041.

This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Oil Drain Plug Gasket parts for the 2019 BMW 330I come from 2 brands — AJUSA and VICTOR REINZ.

This group includes AJUSA 21010400 and VICTOR REINZ 417005800.

This table covers the caps on the oil filler neck. Read more

7 Oil Filler Cap parts are listed for the 2019 BMW 330I, from MOTORAD, REIN, BECK/ARNLEY and 3 other brands. MOTORAD MO156 carries the "Popular" badge.

Listed part numbers: MOTORAD MO156, REIN CPL0041 and BECK/ARNLEY 0160152, plus the other parts above.