39 Engine parts are listed for the 2025 BMW 330I, in 16 part types, covering the 2.0L L4 Turbocharged engine. Each one has a brand, a manufacturer part number and notes that say where it fits.
The engine on the 2025 BMW 330I covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. The largest groups are Oil Filter (15 parts), Oil (4 parts) and Variable Valve Timing (VVT) Solenoid / Actuator (3 parts). The other 13 part types cover the remaining 17 parts.
The 2025 BMW 330I came with a single engine, the 2.0L L4 Turbocharged, and every part is verified against it.
23 brands supply engine parts for the 2025 BMW 330I, led by REIN (4 parts), VALVOLINE (4 parts) and WIX (3 parts), plus 20 more brands. Quality grades include Standard Replacement, Economy and High Performance / Heavy Duty.
A "Popular" badge means the source catalog flagged the part as frequently chosen for the 2025 BMW 330I. 3 parts have it, including MANN HU60141Z (Oil Filter) and MANN HU6015ZKIT (Oil Filter). Each part number opens a page with every vehicle that part fits.
Crankshaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE | 68123 | 🇺🇸 US 🇨🇦 CA | PTFE (Polytetrafluoroethylene) | View on Amazon |
This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
This group shows a single part: MAHLE / CLEVITE 68123.
Engine Cover
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| TECHPRO | BM1228186 | 🇺🇸 US | CAPA Certified | View on Amazon |
| TECHPRO | BM1228190 | 🇺🇸 US 🇨🇦 CA | CAPA Certified | View on Amazon |
This table covers the Engine covers.
TECHPRO supplies both parts for the 2025 BMW 330I.
This group includes TECHPRO BM1228186 and TECHPRO BM1228190.
Harmonic Balancer Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| REIN | HWB0074 | 🇺🇸 US 🇨🇦 CA | 10 x 65mm | View on Amazon |
This table covers the Harmonic Balancer bolts.
This group shows a single part: REIN HWB0074.
Oil
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| VALVOLINE | 888048 | 🇺🇸 US 🇨🇦 CA | European Vehicle Full Synthetic SAE 0W-201 Quart | View on Amazon |
| VALVOLINE | 893931 | 🇺🇸 US | European Vehicle Full Synthetic SAE 0W-301 Quart | View on Amazon |
| VALVOLINE | 893933 | 🇺🇸 US | European Vehicle Full Synthetic SAE 0W-305 Gallon Bay Box | View on Amazon |
| VALVOLINE | 904063 | 🇺🇸 US 🇨🇦 CA | European Vehicle Full Synthetic SAE 0W-205 Gallon Bay Box | View on Amazon |
This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable.
4 Oil parts for the 2025 BMW 330I come from VALVOLINE.
This group includes VALVOLINE 888048, VALVOLINE 893931 and VALVOLINE 893933 and the remaining parts above.
Oil Cooler
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| NISSENS | 91395 | 🇺🇸 US 🇨🇦 CA | with Housing | View on Amazon |
| VEMO | V20600092 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant.
2 Oil Cooler parts for the 2025 BMW 330I come from 2 brands — NISSENS and VEMO.
Part numbers include NISSENS 91395 and VEMO V20600092.
Oil Drain Plug
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN | 090088 | 🇺🇸 US 🇨🇦 CA | MetalStandard | View on Amazon |
| REIN | HWU1041 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the drain plugs in the oil pan.
2 Oil Drain Plug parts for the 2025 BMW 330I come from 2 brands — DORMAN and REIN.
Part numbers include DORMAN 090088 and REIN HWU1041.
Oil Filler Cap
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOTORAD | MO214 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the caps on the oil filler neck.
This group shows a single part: MOTORAD MO214.
Oil Filter
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CHAMP / LUBER-FINER | P1071 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| FVP | G0358 | 🇺🇸 US 🇨🇦 CA | 330i xDriveOriginal Equipment (OE) Part Number 11-42 8 575 211 | View on Amazon |
| PRO-TEC | PXL10358 | 🇺🇸 US 🇨🇦 CA | 330i xDrive | View on Amazon |
| ULTRA-POWER | WL10358 | 🇺🇸 US 🇨🇦 CA | 4WD/AWD | View on Amazon |
| ULTRA-POWER | WL7522 | 🇺🇸 US 🇨🇦 CA | 2WD | View on Amazon |
High Performance / Heavy Duty
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOBIL | M1C354A | 🇺🇸 US 🇨🇦 CA | Extended Performance | View on Amazon |
| WIX | WL10358XP | 🇺🇸 US 🇨🇦 CA | XP Extreme DutyBest for Synthetic Motor Oils | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MANN Popular | HU60141Z | 🇺🇸 US 🇨🇦 CA | 330i xDrive | View on Amazon |
| MANN Popular | HU6015ZKIT | 🇺🇸 US | 330i Base Model | View on Amazon |
| WIX Popular | WL7522 | 🇺🇸 US | 330i Base Model | View on Amazon |
| BECK/ARNLEY | 0410882 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| FEL-PRO | OFCS2040 | 🇺🇸 US 🇨🇦 CA | Includes Cap and Filter | View on Amazon |
| HASTINGS / BALDWIN | P40077 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| VARIOUS MFR | PO99460EX | 🇺🇸 US 🇨🇦 CA | Extended Life | View on Amazon |
| WIX | WL10358 | 🇺🇸 US 🇨🇦 CA | 330i xDrive | View on Amazon |
This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.
15 Oil Filter parts for the 2025 BMW 330I come from 11 brands — WIX, ULTRA-POWER, MANN and 8 other brands. The "Popular" part is MANN HU60141Z.
The Economy section lists 5 options from ULTRA-POWER, CHAMP / LUBER-FINER, FVP and 1 other brand — the catalog's value-priced group. CHAMP / LUBER-FINER P1071 is listed in this group.
The High Performance / Heavy Duty section lists 2 options from MOBIL and WIX — grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. MOBIL M1C354A is listed in this group.
In the Standard Replacement grade, MANN, WIX, BECK/ARNLEY and 3 other brands supply 8 parts: built to original-equipment specification. A representative part number is MANN HU60141Z.
Oil Filter Adapter Gasket / O-Ring
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE | B33885 | 🇺🇸 US | Oil Filter Adapter GasketMolded Rubber | View on Amazon |
This table covers the Oil Filter Adapter Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove.
One part is listed for the 2025 BMW 330I — MAHLE / CLEVITE B33885.
Oil Filter Cover
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOTORAD | MO373 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Oil Filter covers.
One part is listed for the 2025 BMW 330I — MOTORAD MO373.
Oil Pan
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| REIN | ESK0244 | 🇺🇸 US 🇨🇦 CA | Kit | View on Amazon |
| REIN | ESK0235 | 🇺🇸 US | Kit | View on Amazon |
This table covers the oil pans that hold the engine's oil sump.
REIN supplies both parts for the 2025 BMW 330I.
Part numbers include REIN ESK0244 and REIN ESK0235.
Turbocharger Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA | 01335100 | 🇺🇸 US 🇨🇦 CA | Exhaust | View on Amazon |
This table covers the gaskets that seal the Turbocharger. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
One part is listed for the 2025 BMW 330I — AJUSA 01335100.
Turbocharger Wastegate Solenoid / Actuator
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN | 667845 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Turbocharger Wastegate Solenoid actuators. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same.
This group shows a single part: DORMAN 667845.
Valve Cover
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SKP | SK743462 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Valve covers.
One part is listed for the 2025 BMW 330I — SKP SK743462.
Variable Valve Timing (VVT) Solenoid / Actuator
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| VNE | 4022005 | 🇺🇸 US 🇨🇦 CA | Oil Pump Control Valve | View on Amazon |
| VNE | 4022006 | 🇺🇸 US 🇨🇦 CA | Actuator | View on Amazon |
| WELLS | 2T1249 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same.
3 Variable Valve Timing (VVT) Solenoid / Actuator parts for the 2025 BMW 330I come from 2 brands — VNE and WELLS.
Listed part numbers: VNE 4022005, VNE 4022006 and WELLS 2T1249.
Variable Valve Timing (VVT) Solenoid Gasket / Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA | 01907000 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the seals at the Variable Valve Timing (VVT) Solenoid Gasket. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
One part is listed for the 2025 BMW 330I — AJUSA 01907000.
Buying Engine Parts for a 2025 BMW 330I
On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.
- Confirm you have the 2.0L L4 Turbocharged engine — every part on this page is matched to it.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Oil Filter and Oil .
Frequently Asked Questions
How many engine parts fit the 2025 BMW 330I?
Our catalog currently lists 39 engine parts for the 2025 BMW 330I across 16 subcategories and 23 brands, covering the 2.0L L4 Turbocharged engine. Each part is matched to the engine(s) it fits.
What are the signs of engine problems on a 2025 BMW 330I?
Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What oil viscosity is listed for the 2025 BMW 330I?
Oil rows on this page include SAE 0W-20 and SAE 0W-30. Confirm the engine and the weight on the filler cap before you buy — high-mileage and standard fills can differ.
What should I replace at the same time?
Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2025 BMW 330I was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2025 BMW 330I?
Every part on this page is matched to the 2.0L L4 Turbocharged engine. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2025 BMW 330I
Engine Parts for Other BMW 330I Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.