2024 BMW 330I Engine Parts

This table covers the Balance Shaft covers. Read more

This group shows a single part: DORMAN 926054.

This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

One part is listed for the 2024 BMW 330I — MAHLE / CLEVITE 68123.

This table covers the Engine covers. Read more

2 Engine Cover parts for the 2024 BMW 330I come from TECHPRO.

Listed part numbers: TECHPRO BM1228186 and TECHPRO BM1228190.

This table covers the Harmonic Balancer bolts. Read more

One part is listed for the 2024 BMW 330I — REIN HWB0074.

This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes. Read more

8 Motor Mount parts are listed for the 2024 BMW 330I, from REIN, ANCHOR, WESTAR and 1 other brand. ÜRO PARTS 22117581617 carries the "Popular" badge.

In the Economy grade, ÜRO PARTS supplies 1 part: the catalog's value-priced group. A representative part number is ÜRO PARTS 22117581617.

The Standard Replacement section lists 7 options from REIN, ANCHOR and WESTAR — built to original-equipment specification. ANCHOR 10343 is listed in this group.

Listed part numbers: ÜRO PARTS 22117581617, ANCHOR 10343 and ANCHOR 10344, plus the other parts above.

This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable. Read more

6 Oil parts are listed for the 2024 BMW 330I, from LIQUI MOLY, PENTOSIN and VALVOLINE. LIQUI MOLY 22044 carries the "Popular" badge.

This group includes LIQUI MOLY 22044, LIQUI MOLY 22046 and LIQUI MOLY 22048 and the remaining parts above.

This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant. Read more

2 Oil Cooler parts are listed for the 2024 BMW 330I, from MAHLE / CLEVITE and NISSENS.

This group includes MAHLE / CLEVITE CLC362000S and NISSENS 91395.

This table covers the drain plugs in the oil pan. Read more

2 Oil Drain Plug parts are listed for the 2024 BMW 330I, from DORMAN and REIN.

This group includes DORMAN 090088 and REIN HWU1041.

This table covers the caps on the oil filler neck. Read more

One part is listed for the 2024 BMW 330I — MOTORAD MO214.

This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive. Read more

17 Oil Filter parts are listed for the 2024 BMW 330I, from WIX, ULTRA-POWER, MANN and 10 other brands. MAHLE / CLEVITE OX8132D carries the "Popular" badge.

Economy: 5 parts, from ULTRA-POWER, CHAMP / LUBER-FINER, FVP and 1 other brand. A representative part number is CHAMP / LUBER-FINER P1071.

In the High Performance / Heavy Duty grade, MOBIL and WIX supply 2 parts: grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. A representative part number is MOBIL M1C354A.

The Standard Replacement section: 10 options from MANN, WIX, MAHLE / CLEVITE and 5 other brands. MAHLE / CLEVITE OX8132D is listed in this group.

This table covers the Oil Filter Adapter Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

This group shows a single part: MAHLE / CLEVITE B33885.

This table covers the Oil Filter covers. Read more

This group shows a single part: MOTORAD MO373.

This table covers the Oil Filter housings. Read more

3 Oil Filter Housing parts for the 2024 BMW 330I come from 2 brands — ÜRO PARTS and DORMAN.

This group includes DORMAN 918943, ÜRO PARTS 11428580414 and ÜRO PARTS 11428580414PRM.

This table covers the Oil Level Sensor Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove. Read more

One part is listed for the 2024 BMW 330I — AJUSA 16078650.

This table covers the oil pans that hold the engine's oil sump. Read more

2 Oil Pan parts for the 2024 BMW 330I come from REIN.

This group includes REIN ESK0244 and REIN ESK0235.

This table covers the chains that drive the oil pump. Read more

This group shows a single part: CLOYES C529.

This table covers the Oil Pump sprockets. Read more

This group shows a single part: CLOYES S1172.

This table covers the timing chains that keep the cams in time with the crank. Read more

This group shows a single part: CLOYES C528.

This table covers kits that group a timing chain with the related tensioners and guides. Read more

CLOYES supplies both parts for the 2024 BMW 330I.

Part numbers include CLOYES 90528SX and CLOYES 90528S.

This table covers the guides and dampers that keep the timing chain on its path. Read more

3 Timing Chain Guide / Damper parts for the 2024 BMW 330I come from CLOYES.

This group includes CLOYES 96180, CLOYES 96181 and CLOYES 96182.

This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage. Read more

One part is listed for the 2024 BMW 330I — CLOYES 96179.

This table covers the Turbocharger Coolant lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early. Read more

REIN supplies both parts for the 2024 BMW 330I.

Listed part numbers: REIN CHT0924 and REIN CHT0923.

This table covers the gaskets that seal the Turbocharger. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

4 Turbocharger Gasket parts for the 2024 BMW 330I come from 3 brands — ELRING, AJUSA and MAHLE / CLEVITE.

This group includes AJUSA 01335100, ELRING 087320 and ELRING 074140 and the remaining parts above.

This table covers the Turbocharger Oil lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early. Read more

3 Turbocharger Oil Line parts are listed for the 2024 BMW 330I, from REIN and ÜRO PARTS.

This group includes REIN TRP0377, REIN TFP0376 and ÜRO PARTS 11428629969.

This table covers the Turbocharger Wastegate Solenoid actuators. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

One part is listed for the 2024 BMW 330I — DORMAN 667845.

This table covers the Valve covers. Read more

This group shows a single part: SKP SK743462.

This table covers the Valve Cover Bolt screws. Typical signs include a rounded head, a seeping bleeder, or a fastener that will not hold torque. Do not force a new screw into a stripped hole — repair the thread first. Read more

This group shows a single part: ÜRO PARTS 11129454322.

This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for. Read more

2 Valve Cover Gasket parts are listed for the 2024 BMW 330I, from BECK/ARNLEY and MAHLE / CLEVITE.

Listed part numbers: BECK/ARNLEY 0362095 and MAHLE / CLEVITE VS50987.

This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

MAHLE / CLEVITE supplies both parts for the 2024 BMW 330I.

This group includes MAHLE / CLEVITE SS46090 and MAHLE / CLEVITE SS46008A.

This table covers the Variable Valve Timing (VVT) Eccentric Shaft actuators. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

One part is listed for the 2024 BMW 330I — ÜRO PARTS 11378652738.

This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same. Read more

5 Variable Valve Timing (VVT) Solenoid / Actuator parts are listed for the 2024 BMW 330I, from VNE, WELLS and HOLSTEIN. HOLSTEIN 2VTS0370 carries the "Popular" badge.

Listed part numbers: HOLSTEIN 2VTS0370, VNE 4022002 and VNE 4022005, plus the other parts above.

This table covers the seals at the Variable Valve Timing (VVT) Solenoid Gasket. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again. Read more

This group shows a single part: AJUSA 01907000.