The 2019 BMW X7 has 268 engine parts with verified fitment on this page — 57 part types and 50 brands, covering both the 3.0L L6 Turbocharged and the 4.4L V8 Turbocharged. Each part includes a manufacturer part number and application notes.
On the 2019 BMW X7, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. Most of the listed parts are Oil Filter (27 parts), Crankshaft Seal (12 parts) and Motor Mount (12 parts). The other 54 part types cover the remaining 217 parts.
The 2019 BMW X7 was sold with both the 3.0L L6 Turbocharged and the 4.4L V8 Turbocharged. 16 parts fit every engine; the other 252 are engine-specific. Each part shows which engine(s) it fits.
The most listed brands for 2019 BMW X7 engine parts are ELRING (61 parts), AJUSA (33 parts) and REIN (20 parts), plus 47 more brands. Quality grades include Standard Replacement, Economy and High Performance.
38 parts on this 2019 BMW X7 page carry a "Popular" badge — the source catalog's flag for options frequently chosen for this vehicle — including ELRING 575970 (Crankshaft Seal) and ELRING 233380 (Cylinder Head Bolt). Click any part number to see every vehicle that part fits.
Camshaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Fits: 4.4L V8 Turbocharged | TCS46149 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits Rear | View on Amazon |
| VICTOR REINZ Fits: 4.4L V8 Turbocharged | 711692800 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits Rear | View on Amazon |
This table covers the seals at each camshaft end. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
2 Camshaft Seal parts are listed for the 2019 BMW X7, from FEL-PRO and VICTOR REINZ.
This group includes FEL-PRO TCS46149 and VICTOR REINZ 711692800.
Conversion / Lower Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 3.0L L6 Turbocharged | 54302500 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Engine # B58B30C | View on Amazon |
| AJUSA Fits: 4.4L V8 Turbocharged | 54304500 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| ELRING Fits: 3.0L L6 Turbocharged | 565620 | 🇺🇸 US 🇨🇦 CA | with Crankshaft Seal | View on Amazon |
| ELRING Fits: 3.0L L6 Turbocharged | 794700 | 🇺🇸 US 🇨🇦 CA | with Crankshaft Seal | View on Amazon |
| ELRING Fits: 3.0L L6 Turbocharged | 113340 | 🇺🇸 US 🇨🇦 CA | with Crankshaft Seal, Oil Sump Gasket | View on Amazon |
This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
5 Conversion / Lower Gasket Set parts for the 2019 BMW X7 come from 2 brands — ELRING and AJUSA.
Listed part numbers: AJUSA 54302500, AJUSA 54304500 and ELRING 565620, plus the other parts above.
Crankshaft Main Bearing
High Performance
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| KING ENGINE BEARINGS Fits: 3.0L L6 Turbocharged | MB7779XPC | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | BI-Metal (strengthened aluminum)Set | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| KING ENGINE BEARINGS Fits: 3.0L L6 Turbocharged | MB7779SM | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | BI-Metal (strengthened aluminum)Set | View on Amazon |
| KING ENGINE BEARINGS Fits: 3.0L L6 Turbocharged | MB7779MC | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | BI-Metal (strengthened aluminum)Set | View on Amazon |
This table covers the main bearings that support the crankshaft in the block. Typical signs include a growl that rises with speed, or play in the shaft or hub. Set preload the way the notes specify. A dry or crushed bearing fails quickly.
KING ENGINE BEARINGS supplies the 3 Crankshaft Main Bearing parts for the 2019 BMW X7.
In the High Performance grade, KING ENGINE BEARINGS supplies 1 part: engineered beyond original-equipment specification. A representative part number is KING ENGINE BEARINGS MB7779XPC.
The Standard Replacement section lists 2 options from KING ENGINE BEARINGS — built to original-equipment specification. KING ENGINE BEARINGS MB7779SM is listed in this group.
This group includes KING ENGINE BEARINGS MB7779XPC, KING ENGINE BEARINGS MB7779SM and KING ENGINE BEARINGS MB7779MC.
Crankshaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Popular Fits: 3.0L L6 Turbocharged | 575970 | 🇺🇸 US 🇨🇦 CA | Height [MM]: 8Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) | View on Amazon |
| ELRING Popular Fits: 3.0L L6 Turbocharged | 492060 | 🇺🇸 US 🇨🇦 CA | Dust Cover: with Dust LipMaterial: FPM (Fluoride Rubber) | View on Amazon |
| VICTOR REINZ Popular Fits: 4.4L V8 Turbocharged | 811040300 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rearwith Flange | View on Amazon |
| ELRING Fits: 3.0L L6 Turbocharged | 584160 | 🇺🇸 US 🇨🇦 CA | Material: FPM (fluoride rubber)Swirl Type: Right-hand Twist | View on Amazon |
| ELRING Fits: 3.0L L6 Turbocharged | 586550 | 🇺🇸 US 🇨🇦 CA | with Mounting SleeveMaterial: PTFE (polytetrafluoroethylene) | View on Amazon |
| ELRING Fits: 4.4L V8 Turbocharged | 656160 | 🇺🇸 US 🇨🇦 CA | Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber)Swirl Type: Right-hand Twist | View on Amazon |
| FEL-PRO Fits: 4.4L V8 Turbocharged | BS40780 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Rear | View on Amazon |
| MAHLE / CLEVITE Fits: 3.0L L6 Turbocharged | 68102 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | PTFE (Polytetrafluoroethylene) | View on Amazon |
| MAHLE / CLEVITE Fits: 4.4L V8 Turbocharged | 68040 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RubberIncludes Flange | View on Amazon |
| VICTOR REINZ Fits: 3.0L L6 Turbocharged | 813700200 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front | View on Amazon |
| VICTOR REINZ Fits: 3.0L L6 Turbocharged | 811044800 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RearReplaces OE Part Number(s) 11148602594 | View on Amazon |
| VICTOR REINZ Fits: 4.4L V8 Turbocharged | 813939100 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front | View on Amazon |
This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
12 Crankshaft Seal parts are listed for the 2019 BMW X7, from ELRING, VICTOR REINZ, MAHLE / CLEVITE and 1 other brand. ELRING 575970 carries the "Popular" badge.
Cylinder Head Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Popular Fits: 3.0L L6 Turbocharged | 233380 | 🇺🇸 US 🇨🇦 CA | SetBolt Head-/Nut Design: Male Torx | View on Amazon |
| AJUSA Fits: 3.0L L6 Turbocharged | 81069200 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Engine # B58B30C | View on Amazon |
| AJUSA Fits: 4.4L V8 Turbocharged | 81061000 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| ELRING Fits: 3.0L L6 Turbocharged | 794480 | 🇺🇸 US 🇨🇦 CA | SetBolt Head-/Nut Design: Female Torx | View on Amazon |
| ELRING Fits: 3.0L L6 Turbocharged | 469830 | 🇺🇸 US 🇨🇦 CA | SetBolt Head-/Nut Design: Male Torx | View on Amazon |
| ELRING Fits: 4.4L V8 Turbocharged | 249210 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| VICTOR REINZ Fits: 3.0L L6 Turbocharged | 141226103 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
This table covers the bolts that clamp the cylinder head to the block.
7 Cylinder Head Bolt parts for the 2019 BMW X7 come from 3 brands — ELRING, AJUSA and VICTOR REINZ. The "Popular" part is ELRING 233380.
This group includes ELRING 233380, AJUSA 81069200 and AJUSA 81061000 and the remaining parts above.
Cylinder Head Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Popular Fits: 3.0L L6 Turbocharged | 793491 | 🇺🇸 US 🇨🇦 CA | Installed Thickness [MM]: 0,81Material: Multi-Layer Steel (MLS) | View on Amazon |
| AJUSA Fits: 4.4L V8 Turbocharged | 10249900 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Multi Layered SteelThickness: 1 MM | View on Amazon |
| AJUSA Fits: 4.4L V8 Turbocharged | 10249910 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Multi Layered SteelThickness: 0.7 MM | View on Amazon |
| AJUSA Fits: 4.4L V8 Turbocharged | 52607100 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Right | View on Amazon |
| AJUSA Fits: 4.4L V8 Turbocharged | 52607200 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Left | View on Amazon |
| ELRING Fits: 3.0L L6 Turbocharged | 383890 | 🇺🇸 US 🇨🇦 CA | Diameter [MM]: 85Installed Thickness [MM]: 1.45 | View on Amazon |
| ELRING Fits: 3.0L L6 Turbocharged | 383900 | 🇺🇸 US 🇨🇦 CA | Diameter [MM]: 85Installed Thickness [MM]: 1.55 | View on Amazon |
| ELRING Fits: 3.0L L6 Turbocharged | 383910 | 🇺🇸 US 🇨🇦 CA | Diameter [MM]: 85Installed Thickness [MM]: 1.65 | View on Amazon |
| ELRING Fits: 3.0L L6 Turbocharged | 739501 | 🇺🇸 US 🇨🇦 CA | Installed Thickness [MM]: 1,11Material: Multi-Layer Steel (MLS) | View on Amazon |
This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
9 Cylinder Head Gasket parts for the 2019 BMW X7 come from 2 brands — ELRING and AJUSA. The "Popular" part is ELRING 793491.
Listed part numbers: ELRING 793491, AJUSA 10249900 and AJUSA 10249910, plus the other parts above.
Cylinder Head Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 3.0L L6 Turbocharged | 52561500 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Engine # B58B30C | View on Amazon |
| AJUSA Fits: 4.4L V8 Turbocharged | 52607000 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Complete Set | View on Amazon |
| ELRING Fits: 3.0L L6 Turbocharged | 113980 | 🇺🇸 US 🇨🇦 CA | Includes Valve Stem Seals | View on Amazon |
| ELRING Fits: 3.0L L6 Turbocharged | 820750 | 🇺🇸 US 🇨🇦 CA | with valve stem sealswithout cylinder head gasket | View on Amazon |
This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
4 Cylinder Head Gasket Set parts for the 2019 BMW X7 come from 2 brands — AJUSA and ELRING.
This group includes AJUSA 52561500, AJUSA 52607000 and ELRING 113980 and the remaining parts above.
Cylinder Head Temperature Sensor
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WELLS Fits: 3.0L L6 Turbocharged | 5S16785 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the Cylinder Head temperature sensors. Typical signs include hard cold starts, a fan that never comes on, or a gauge that disagrees with the scan tool. A sensor that reads open or shorted is usually the part; an implausible-but-smooth reading can be wiring.
One part is listed for the 2019 BMW X7 — WELLS 5S16785.
Engine Block Heater
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| KAT'S HEATERS Fits: 3.0L L6 Turbocharged | 28400 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Engine Heater Replacement Cord | View on Amazon |
This table covers the block heaters that warm the coolant or oil in cold weather.
One part is listed for the 2019 BMW X7 — KAT'S HEATERS 28400.
Engine Cover
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| TECHPRO Fits: all 2019 X7 engines | BM1228191 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front LowerG05 | View on Amazon |
This table covers the Engine covers.
This group shows a single part: TECHPRO BM1228191.
Engine Kit Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 3.0L L6 Turbocharged | 50515000 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Engine # B58B30C | View on Amazon |
| AJUSA Fits: 4.4L V8 Turbocharged | 50549100 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
2 Engine Kit Gasket Set parts for the 2019 BMW X7 come from AJUSA.
Part numbers include AJUSA 50515000 and AJUSA 50549100.
Fuel Pump Camshaft Follower
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WELLS Fits: all 2019 X7 engines | 5T5004 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the followers that drive a mechanical fuel pump off the camshaft.
This group shows a single part: WELLS 5T5004.
Harmonic Balancer Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| REIN Fits: 3.0L L6 Turbocharged | HWB0074 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 10 x 65mm | View on Amazon |
This table covers the Harmonic Balancer bolts.
One part is listed for the 2019 BMW X7 — REIN HWB0074.
Intake Manifold Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Popular Fits: 3.0L L6 Turbocharged | 076500 | 🇺🇸 US 🇨🇦 CA | Body code: G07 | View on Amazon |
| AJUSA Fits: 3.0L L6 Turbocharged | 13313000 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Engine # B58B30C | View on Amazon |
| AJUSA Fits: 4.4L V8 Turbocharged | 13314000 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| ELRING Fits: 3.0L L6 Turbocharged | 584600 | 🇺🇸 US 🇨🇦 CA | Body code: G07 | View on Amazon |
| ELRING Fits: 3.0L L6 Turbocharged | 546900 | 🇺🇸 US 🇨🇦 CA | Material: Hydrogenated Nitrile Rubber (HNBR) | View on Amazon |
| ELRING Fits: 3.0L L6 Turbocharged | 203010 | 🇺🇸 US 🇨🇦 CA | Throttle HousingBody code: G07 | View on Amazon |
| ELRING Fits: 4.4L V8 Turbocharged | 648280 | 🇺🇸 US 🇨🇦 CA | Body code: G07 | View on Amazon |
| MAHLE / CLEVITE Fits: 3.0L L6 Turbocharged | MS20642 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | SetMolded Rubber | View on Amazon |
| ULTRA-POWER Fits: 3.0L L6 Turbocharged | MS19660 | 🇺🇸 US 🇨🇦 CA | Intake Manifold SetOVAL PORT | View on Amazon |
| VICTOR REINZ Fits: 3.0L L6 Turbocharged | 711737500 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
10 Intake Manifold Gasket parts for the 2019 BMW X7 come from 5 brands — ELRING, AJUSA, MAHLE / CLEVITE and 2 other brands. The "Popular" part is ELRING 076500.
Motor Mount
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ANCHOR Popular Fits: all 2019 X7 engines | 10258 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front RightHydraulic | View on Amazon |
| ANCHOR Popular Fits: 3.0L L6 Turbocharged | 10260 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front LeftHydraulic | View on Amazon |
| DEA / MARMON RIDE CONTROL Fits: 3.0L L6 Turbocharged | A70079 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Left | View on Amazon |
| DEA / MARMON RIDE CONTROL Fits: 3.0L L6 Turbocharged | A70084 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Right | View on Amazon |
| DEA / MARMON RIDE CONTROL Fits: 4.4L V8 Turbocharged | A70085 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Left | View on Amazon |
| DEA / MARMON RIDE CONTROL Fits: 4.4L V8 Turbocharged | A70086 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Right | View on Amazon |
| PIONEER Fits: all 2019 X7 engines | 610258 | 🇺🇸 US 🇨🇦 CA | Front Right | View on Amazon |
| PIONEER Fits: 3.0L L6 Turbocharged | 611260 | 🇺🇸 US 🇨🇦 CA | Front Left | View on Amazon |
| VNE Fits: 3.0L L6 Turbocharged | 4009862 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Left | View on Amazon |
| VNE Fits: 4.4L V8 Turbocharged | 4009966 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Left | View on Amazon |
| VNE Fits: 4.4L V8 Turbocharged | 4009967 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Right | View on Amazon |
| WESTAR Fits: 3.0L L6 Turbocharged | EM7560 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Right | View on Amazon |
This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes.
12 Motor Mount parts are listed for the 2019 BMW X7, from DEA / MARMON RIDE CONTROL, VNE, ANCHOR and 2 other brands. ANCHOR 10258 carries the "Popular" badge. 2 parts fit every engine; the other 10 are engine-specific.
Oil
Summary: Notes list SAE 0W-20, SAE 0W-30 and SAE 5W-30. Confirm the engine and the weight on the filler cap before you buy. Replacement brands in this table include LIQUI MOLY, VALVOLINE and PENTOSIN.
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| LIQUI MOLY Popular Fits: 3.0L L6 Turbocharged | 22044 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Top Tec 6600 0W-201 Liter | View on Amazon |
| LIQUI MOLY Popular Fits: 3.0L L6 Turbocharged | 22046 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Top Tec 6600 0W-205 Liter | View on Amazon |
| MOBIL Popular Fits: all 2019 X7 engines | 127568 | 🇺🇸 US | ESP 5W30 1 Quart | View on Amazon |
| VALVOLINE Popular Fits: 4.4L V8 Turbocharged | 787301 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | European Vehicle Full Synthetic SAE 5W-301 Quart | View on Amazon |
| LIQUI MOLY Fits: 3.0L L6 Turbocharged | 22048 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Top Tec 6600 0W-2020 Liter | View on Amazon |
| LIQUI MOLY Fits: 4.4L V8 Turbocharged | 22260 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Special Tec B FE 0W-301 Liter | View on Amazon |
| LIQUI MOLY Fits: 4.4L V8 Turbocharged | 22261 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Special Tec B FE 0W-305 Liter | View on Amazon |
| LIQUI MOLY Fits: 4.4L V8 Turbocharged | 22269 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Special Tec B FE 0W-3020 Liter | View on Amazon |
| PENTOSIN Fits: 3.0L L6 Turbocharged | 8044317 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Pento Speed FESAE 0W-20 | View on Amazon |
| PENTOSIN Fits: 3.0L L6 Turbocharged | 8044319 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Pento Speed FESAE 0W-20 | View on Amazon |
| VALVOLINE Fits: 3.0L L6 Turbocharged | 888048 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | European Vehicle Full Synthetic SAE 0W-201 Quart | View on Amazon |
| VALVOLINE Fits: 4.4L V8 Turbocharged | 893931 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | European Vehicle Full Synthetic SAE 0W-301 Quart | View on Amazon |
This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable.
12 Oil parts are listed for the 2019 BMW X7, from LIQUI MOLY, VALVOLINE, PENTOSIN and 1 other brand. LIQUI MOLY 22044 carries the "Popular" badge. 1 part fits every engine; the other 11 are engine-specific.
Oil Cooler
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| NISSENS Fits: 3.0L L6 Turbocharged | 91359 | 🇺🇸 US 🇨🇦 CA | without Housing | View on Amazon |
| REIN Fits: 3.0L L6 Turbocharged | ECK0273 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| ÜRO PARTS Fits: 3.0L L6 Turbocharged | 11428583901 | 🇺🇸 US 🇨🇦 CA | Located on oil filter housing. | View on Amazon |
| VEMO Fits: 3.0L L6 Turbocharged | V20600077 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the heat exchangers that cool engine oil. Typical signs include oil at the cooler fittings, or coolant that looks like a milkshake. Pressure-test both circuits after a cooler swap — a leak here mixes oil and coolant.
4 Oil Cooler parts are listed for the 2019 BMW X7, from NISSENS, REIN, ÜRO PARTS and 1 other brand.
Listed part numbers: NISSENS 91359, REIN ECK0273 and ÜRO PARTS 11428583901, plus the other parts above.
Oil Cooler Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 3.0L L6 Turbocharged | 77010300 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | UpperEngine # B58B30C | View on Amazon |
| AJUSA Fits: 3.0L L6 Turbocharged | 77010400 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | LowerEngine # B58B30C | View on Amazon |
| ELRING Fits: 3.0L L6 Turbocharged | 784680 | 🇺🇸 US 🇨🇦 CA | Body code: G07 | View on Amazon |
| MAHLE / CLEVITE Fits: 3.0L L6 Turbocharged | B33793 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Engine Oil Cooler GasketMolded Rubber | View on Amazon |
This table covers the gaskets that seal the Oil Cooler. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
4 Oil Cooler Gasket parts for the 2019 BMW X7 come from 3 brands — AJUSA, ELRING and MAHLE / CLEVITE.
Listed part numbers: AJUSA 77010300, AJUSA 77010400 and ELRING 784680, plus the other parts above.
Oil Dipstick / Tube Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Fits: 3.0L L6 Turbocharged | 748935 | 🇺🇸 US 🇨🇦 CA | Body code: G07 | View on Amazon |
This table covers the seals at the Oil Dipstick / Tube. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
This group shows a single part: ELRING 748935.
Oil Drain Plug
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Popular Fits: 3.0L L6 Turbocharged | 090088 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | MetalStandard | View on Amazon |
| AGS Fits: 3.0L L6 Turbocharged | ODP00010 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | M12x1.50 | View on Amazon |
| ELRING Fits: 3.0L L6 Turbocharged | 455740 | 🇺🇸 US 🇨🇦 CA | with Seal RingBolt Head-/Nut Design: Male Hex | View on Amazon |
| ELRING Fits: 3.0L L6 Turbocharged | 427210 | 🇺🇸 US 🇨🇦 CA | without Seal RingBolt Head-/Nut Design: Male Hex | View on Amazon |
| REIN Fits: 3.0L L6 Turbocharged | HWU1041 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| REIN Fits: 4.4L V8 Turbocharged | HWU0115 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the drain plugs in the oil pan.
6 Oil Drain Plug parts are listed for the 2019 BMW X7, from ELRING, REIN, DORMAN and 1 other brand. DORMAN 090088 carries the "Popular" badge.
This group includes DORMAN 090088, AGS ODP00010 and ELRING 455740 and the remaining parts above.
Oil Drain Plug Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 3.0L L6 Turbocharged | 21010400 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Engine # B58B30Cwith Original Equipment (OE) # 7119963132 | View on Amazon |
| AJUSA Fits: 4.4L V8 Turbocharged | 21016800 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| ELRING Fits: 3.0L L6 Turbocharged | 110507 | 🇺🇸 US 🇨🇦 CA | Material: CopperOutside Diameter: 16.0 mm | View on Amazon |
| ELRING Fits: 4.4L V8 Turbocharged | 247405 | 🇺🇸 US 🇨🇦 CA | Material: Aluminium | View on Amazon |
| VICTOR REINZ Fits: 3.0L L6 Turbocharged | 417005800 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| VICTOR REINZ Fits: 4.4L V8 Turbocharged | 417016600 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
6 Oil Drain Plug Gasket parts for the 2019 BMW X7 come from 3 brands — AJUSA, ELRING and VICTOR REINZ.
Part numbers include AJUSA 21010400, AJUSA 21016800 and ELRING 110507, among others listed above.
Oil Filler Cap
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BECK/ARNLEY Fits: all 2019 X7 engines | 0160152 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| MOTORAD Fits: all 2019 X7 engines | MO156 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| REIN Fits: 4.4L V8 Turbocharged | CPL0036 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| ÜRO PARTS Fits: 4.4L V8 Turbocharged | 11128655331 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the caps on the oil filler neck.
4 Oil Filler Cap parts are listed for the 2019 BMW X7, from BECK/ARNLEY, MOTORAD, REIN and 1 other brand. 2 parts fit every engine; the other 2 are engine-specific.
Listed part numbers: BECK/ARNLEY 0160152, MOTORAD MO156 and REIN CPL0036, plus the other parts above.
Oil Filter
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| PRO-TEC Popular Fits: 4.4L V8 Turbocharged | PXL57189 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| CHAMP / LUBER-FINER Fits: 4.4L V8 Turbocharged | P987 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| FAMOUS BRAND Fits: 4.4L V8 Turbocharged | 84189 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| FVP Fits: 3.0L L6 Turbocharged | G0342 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| PRO-TEC Fits: 3.0L L6 Turbocharged | PXL10342 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| PUROLATOR Fits: 4.4L V8 Turbocharged | L25904 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| STP Fits: 3.0L L6 Turbocharged | S90186 | 🇺🇸 US 🇨🇦 CA | STPCartridge Type | View on Amazon |
| ULTRA-POWER Fits: 4.4L V8 Turbocharged | 57189 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits or OE # 11-42 7 583 220~ | View on Amazon |
| VARIOUS MFR Fits: 4.4L V8 Turbocharged | PG5904 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| VARIOUS MFR Fits: 4.4L V8 Turbocharged | PO5904EX | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Extended Life | View on Amazon |
High Performance / Heavy Duty
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOBIL Fits: 3.0L L6 Turbocharged | M1C457A | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Extended Performance | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| HENGST Popular Fits: 3.0L L6 Turbocharged | E859HD352 | 🇺🇸 US 🇨🇦 CA | Includes Gasket SetCartridge | View on Amazon |
| HENGST Popular Fits: 4.4L V8 Turbocharged | E359HD801 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes Gasket SetCartridge | View on Amazon |
| MAHLE / CLEVITE Popular Fits: 3.0L L6 Turbocharged | OX1146D | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Cartridge | View on Amazon |
| MAHLE / CLEVITE Popular Fits: 4.4L V8 Turbocharged | OX3537D | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Cartridge | View on Amazon |
| MANN Popular Fits: 3.0L L6 Turbocharged | HU6022Z | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| WIX Popular Fits: 4.4L V8 Turbocharged | 57189 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| ACDELCO Fits: 3.0L L6 Turbocharged | PF696G | 🇺🇸 US 🇨🇦 CA | Gold / Professional | View on Amazon |
| ACDELCO Fits: 4.4L V8 Turbocharged | PF629G | 🇺🇸 US 🇨🇦 CA | Gold / ProfessionalInner Diameter Top (mm): 28.5mm | View on Amazon |
| BECK/ARNLEY Fits: 4.4L V8 Turbocharged | 0410872 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| FEL-PRO Fits: 4.4L V8 Turbocharged | OFCS2006 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes Cap and Filter | View on Amazon |
| HASTINGS / BALDWIN Fits: 3.0L L6 Turbocharged | P40076 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| HASTINGS / BALDWIN Fits: 4.4L V8 Turbocharged | LF665 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| HENGST Fits: 4.4L V8 Turbocharged | E359HD306 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes Gasket SetCartridge | View on Amazon |
| MANN Fits: 4.4L V8 Turbocharged | HU8007Z | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| VARIOUS MFR Fits: 3.0L L6 Turbocharged | PG99256EX | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Extended Life | View on Amazon |
| WIX Fits: 3.0L L6 Turbocharged | WL10342 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.
27 Oil Filter parts are listed for the 2019 BMW X7, from VARIOUS MFR, HENGST, PRO-TEC and 14 other brands. PRO-TEC PXL57189 carries the "Popular" badge. Economy, High Performance / Heavy Duty and Standard Replacement are all represented, and Standard Replacement alone accounts for 16 parts.
Oil Filter Adapter Gasket / O-Ring
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE Fits: 3.0L L6 Turbocharged | B33794 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Oil Filter Adapter GasketMolded Rubber | View on Amazon |
This table covers the Oil Filter Adapter Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove.
This group shows a single part: MAHLE / CLEVITE B33794.
Oil Filter Cover
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Popular Fits: 4.4L V8 Turbocharged | 921111 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| ULTRA-POWER Popular Fits: 4.4L V8 Turbocharged | 921111 | 🇺🇸 US 🇨🇦 CA | Cover | View on Amazon |
| BECK/ARNLEY Fits: 4.4L V8 Turbocharged | 0410002 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| MOTORAD Fits: 3.0L L6 Turbocharged | MO388 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| MOTORAD Fits: 4.4L V8 Turbocharged | MO308 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| REIN Fits: 3.0L L6 Turbocharged | CPL0070 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| REIN Fits: 4.4L V8 Turbocharged | CPL0071 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | with Oil Filter OE# 11427583220 | View on Amazon |
| SKP Fits: 4.4L V8 Turbocharged | SK121443 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| ÜRO PARTS Fits: 4.4L V8 Turbocharged | 11427615389 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Oil Filter covers.
9 Oil Filter Cover parts for the 2019 BMW X7 come from 7 brands — MOTORAD, REIN, DORMAN and 4 other brands. The "Popular" part is DORMAN 921111.
Listed part numbers: DORMAN 921111 and BECK/ARNLEY 0410002, plus the other parts above.
Oil Filter Housing
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Popular Fits: 3.0L L6 Turbocharged | 926453 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | OE FIX | View on Amazon |
| ELRING Fits: 3.0L L6 Turbocharged | B33500 | 🇺🇸 US 🇨🇦 CA | with Oil Cooler | View on Amazon |
| HENGST Fits: 3.0L L6 Turbocharged | H811H | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | with E859H D352 Filter, Oil Cooler and Bolts/Screws | View on Amazon |
| VEMO Fits: 3.0L L6 Turbocharged | V20601662 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes: Oil cooler, Oil filter housing, seal rings | View on Amazon |
| VEMO Fits: 3.0L L6 Turbocharged | V20600098 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | with Oil Filter Housing | View on Amazon |
This table covers the Oil Filter housings.
5 Oil Filter Housing parts for the 2019 BMW X7 come from 4 brands — VEMO, DORMAN, ELRING and 1 other brand. The "Popular" part is DORMAN 926453.
This group includes DORMAN 926453, ELRING B33500 and HENGST H811H and the remaining parts above.
Oil Filter Housing Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Fits: 3.0L L6 Turbocharged | 784620 | 🇺🇸 US 🇨🇦 CA | Engine SidedBody code: G07 | View on Amazon |
This table covers the seals at the Oil Filter Housing. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
One part is listed for the 2019 BMW X7 — ELRING 784620.
Oil Level Sensor
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| HELLA Fits: 4.4L V8 Turbocharged | 010497721 | 🇺🇸 US 🇨🇦 CA | 3-Pin ConnectorIncludes Seal | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: 4.4L V8 Turbocharged | FLS325 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| ÜRO PARTS Fits: 4.4L V8 Turbocharged | 12618638754 | 🇺🇸 US 🇨🇦 CA | 12VTerminal Type: Blade | View on Amazon |
| VEMO Fits: 4.4L V8 Turbocharged | V20720190 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Oil Level sensors. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors.
4 Oil Level Sensor parts are listed for the 2019 BMW X7, from HELLA, STANDARD MOTOR PRODUCTS, ÜRO PARTS and 1 other brand.
This group includes HELLA 010497721, STANDARD MOTOR PRODUCTS FLS325 and ÜRO PARTS 12618638754 and the remaining parts above.
Oil Level Sensor Gasket / O-Ring
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 4.4L V8 Turbocharged | 16078650 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| ELRING Fits: all 2019 X7 engines | 351210 | 🇺🇸 US 🇨🇦 CA | Colour: BlackMaterial: AEM (Ethylene Acrylate Rubber) | View on Amazon |
| ELRING Fits: 3.0L L6 Turbocharged | 078500 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Material: AEM (Ethylene Acrylate Rubber) | View on Amazon |
This table covers the Oil Level Sensor Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove.
3 Oil Level Sensor Gasket / O-Ring parts are listed for the 2019 BMW X7, from ELRING and AJUSA. 1 part fits every engine; the other 2 are engine-specific.
This group includes AJUSA 16078650, ELRING 351210 and ELRING 078500.
Oil Pan
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| REIN Fits: 3.0L L6 Turbocharged | ESK0249 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Kit | View on Amazon |
This table covers the oil pans that hold the engine's oil sump.
This group shows a single part: REIN ESK0249.
Oil Pan Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 4.4L V8 Turbocharged | 59018100 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| ELRING Fits: 3.0L L6 Turbocharged | 380271 | 🇺🇸 US 🇨🇦 CA | Body code: G07 | View on Amazon |
| ELRING Fits: 4.4L V8 Turbocharged | 303180 | 🇺🇸 US 🇨🇦 CA | Body code: G07All-Wheel Drive | View on Amazon |
| ELRING Fits: 4.4L V8 Turbocharged | 299510 | 🇺🇸 US 🇨🇦 CA | Body code: G07 | View on Amazon |
| VICTOR REINZ Fits: 3.0L L6 Turbocharged | 703141410 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RTV Silicone | View on Amazon |
This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
5 Oil Pan Gasket parts are listed for the 2019 BMW X7, from ELRING, AJUSA and VICTOR REINZ.
Part numbers include AJUSA 59018100, ELRING 380271 and ELRING 303180, among others listed above.
Oil Pump Chain
Kit
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| VAICO Popular Fits: 3.0L L6 Turbocharged | V203921 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Expert Kits +Oil Pump Drive Set | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| S.A. GEAR Fits: 3.0L L6 Turbocharged | C1213 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| S.A. GEAR Fits: 3.0L L6 Turbocharged | 76437P | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes Chain, Oil Pump SprocketOil Pump Drive Set | View on Amazon |
| S.A. GEAR Fits: 3.0L L6 Turbocharged | C1165 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Fits: 3.0L L6 Turbocharged | C530 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Engine Oil Pump Chain | View on Amazon |
| VAICO Fits: 4.4L V8 Turbocharged | V203921 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Expert Kits +Oil Pump Drive Set | View on Amazon |
This table covers the chains that drive the oil pump.
6 Oil Pump Chain parts for the 2019 BMW X7 come from 3 brands — S.A. GEAR, VAICO and CLOYES. The "Popular" part is VAICO V203921.
The Kit section lists 1 option from VAICO — grouped under the catalog's "Kit" designation — the notes column spells out what sets them apart. VAICO V203921 is listed in this group.
Standard Replacement: 3 parts, from S.A. GEAR. A representative part number is S.A. GEAR C1213.
2 further parts sit outside the graded sections, with the same engine-level match.
Listed part numbers: VAICO V203921, S.A. GEAR C1213 and S.A. GEAR 76437P, plus the other parts above.
Oil Pump Sprocket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Fits: 3.0L L6 Turbocharged | S1172 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the Oil Pump sprockets.
This group shows a single part: CLOYES S1172.
Rocker Arm
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| VNE Fits: 4.4L V8 Turbocharged | 41000274 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Marked with Number 1 | View on Amazon |
This table covers the rocker arms that transfer cam motion to the valves.
One part is listed for the 2019 BMW X7 — VNE 41000274.
Timing Chain
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Fits: 3.0L L6 Turbocharged | C528 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the timing chains that keep the cams in time with the crank.
This group shows a single part: CLOYES C528.
Timing Chain & Component Kit
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| S.A. GEAR Popular Fits: 3.0L L6 Turbocharged | 76399 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Fits: 3.0L L6 Turbocharged | 90528SAX | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Does Not Include SprocketsIncludes Timing Chain Tensioner, Chain Guide (2), Chain Tensioner Guide, Timing Chain, Oil Pump Chain | View on Amazon |
| CLOYES Fits: 3.0L L6 Turbocharged | 90528SA | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes: Timing Chain Tensioner, Timing Chain Guide (2), Timing Chain Tensioner Guide, Timing Chain, Oil Pump Chain, Oil Pump Sprocket | View on Amazon |
| VAICO Fits: 3.0L L6 Turbocharged | V2010026BEK | 🇺🇸 US 🇨🇦 CA | Includes: Timing chains, Tensioner, Guides | View on Amazon |
| VAICO Fits: 3.0L L6 Turbocharged | V2010026 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes: Timing Chain, Tensioner, Guides, camshaft adjusters, bolts | View on Amazon |
This table covers kits that group a timing chain with the related tensioners and guides.
5 Timing Chain & Component Kit parts are listed for the 2019 BMW X7, from CLOYES, VAICO and S.A. GEAR. S.A. GEAR 76399 carries the "Popular" badge.
In the Economy grade, S.A. GEAR supplies 1 part: the catalog's value-priced group. A representative part number is S.A. GEAR 76399.
The Standard Replacement section: 4 options from CLOYES and VAICO. CLOYES 90528SAX is listed in this group.
Part numbers include S.A. GEAR 76399, CLOYES 90528SAX and CLOYES 90528SA, among others listed above.
Timing Chain Guide / Damper
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Fits: 3.0L L6 Turbocharged | 96180 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Engine Timing Chain Guide | View on Amazon |
| CLOYES Fits: 3.0L L6 Turbocharged | 96181 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Engine Timing Chain Guide | View on Amazon |
| CLOYES Fits: 3.0L L6 Turbocharged | 96182 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Engine Timing Chain Tensioner Guide | View on Amazon |
This table covers the guides and dampers that keep the timing chain on its path.
3 Timing Chain Guide / Damper parts for the 2019 BMW X7 come from CLOYES.
Listed part numbers: CLOYES 96180, CLOYES 96181 and CLOYES 96182.
Timing Chain Tensioner
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CLOYES Fits: 3.0L L6 Turbocharged | 96179 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Engine Timing Chain Tensioner | View on Amazon |
This table covers the tensioners that keep the timing chain taut. Typical signs include belt flutter, a chirp that returns after a new belt, or an arm that no longer damps. Replace the tensioner with the belt at higher mileage.
One part is listed for the 2019 BMW X7 — CLOYES 96179.
Timing Cover Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 4.4L V8 Turbocharged | 77031300 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| ELRING Fits: 4.4L V8 Turbocharged | 648850 | 🇺🇸 US 🇨🇦 CA | Cylinder Head,LeftBody code: G07 | View on Amazon |
| ELRING Fits: 4.4L V8 Turbocharged | 648290 | 🇺🇸 US 🇨🇦 CA | Cylinder Head,RightBody code: G07 | View on Amazon |
| ELRING Fits: 4.4L V8 Turbocharged | 302411 | 🇺🇸 US 🇨🇦 CA | Body code: G07 | View on Amazon |
This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
4 Timing Cover Gasket parts are listed for the 2019 BMW X7, from ELRING and AJUSA.
Part numbers include AJUSA 77031300, ELRING 648850 and ELRING 648290, among others listed above.
Timing Cover Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Fits: 4.4L V8 Turbocharged | TCS46311 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front | View on Amazon |
| MAHLE / CLEVITE Fits: 4.4L V8 Turbocharged | 67930 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | PTFE (Polytetrafluoroethylene) | View on Amazon |
This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
2 Timing Cover Seal parts are listed for the 2019 BMW X7, from FEL-PRO and MAHLE / CLEVITE.
This group includes FEL-PRO TCS46311 and MAHLE / CLEVITE 67930.
Turbocharger
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BORG-WARNER Fits: 3.0L L6 Turbocharged | 18559880115 | 🇺🇸 US 🇨🇦 CA | with OE No. 11657934386, 11658679021 | View on Amazon |
| GPD Fits: 3.0L L6 Turbocharged | 2512001 | 🇺🇸 US 🇨🇦 CA | with Electronic Actuator | View on Amazon |
This table covers the turbochargers that compress intake air.
2 Turbocharger parts are listed for the 2019 BMW X7, from BORG-WARNER and GPD.
Part numbers include BORG-WARNER 18559880115 and GPD 2512001.
Turbocharger Boost Sensor
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WELLS Fits: 4.4L V8 Turbocharged | 5S13286 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BECK/ARNLEY Fits: 4.4L V8 Turbocharged | 1581726 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| HELLA Fits: 4.4L V8 Turbocharged | 358152381 | 🇺🇸 US 🇨🇦 CA | 4-Pin ConnectorBolted | View on Amazon |
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WELLS Fits: 3.0L L6 Turbocharged | 5S14741 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the Turbocharger Boost sensors. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors.
4 Turbocharger Boost Sensor parts for the 2019 BMW X7 come from 3 brands — WELLS, BECK/ARNLEY and HELLA.
The Economy section: 1 option from WELLS. WELLS 5S13286 is listed in this group.
Standard Replacement: 2 parts, from BECK/ARNLEY and HELLA. A representative part number is BECK/ARNLEY 1581726.
1 further part sits outside the graded sections, with the same engine-level match.
This group includes WELLS 5S13286, BECK/ARNLEY 1581726 and HELLA 358152381 and the remaining parts above.
Turbocharger Boost Solenoid
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| VEMO Fits: 3.0L L6 Turbocharged | V206300131 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the Turbocharger Boost solenoids. Typical signs include a harsh or missing shift, or a code for this solenoid circuit. Check resistance and the connector before dropping the pan for a solenoid.
One part is listed for the 2019 BMW X7 — VEMO V206300131.
Turbocharger Coolant Line
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| REIN Popular Fits: 4.4L V8 Turbocharged | CHT0698 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Return (Turbocharger To Pipe)For Cylinder 5-8 | View on Amazon |
| REIN Popular Fits: 4.4L V8 Turbocharged | CHT0697 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Supply (Turbocharger To Pipe)For Cylinder 1-4 | View on Amazon |
| DORMAN Fits: 4.4L V8 Turbocharged | 667596 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Return (Turbocharger To Pipe)Cylinders 5, 6, 7, and 8 | View on Amazon |
| DORMAN Fits: 4.4L V8 Turbocharged | 667599 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Supply (Turbocharger To Pipe)Cylinders 5, 6, 7, and 8 | View on Amazon |
| DORMAN Fits: 4.4L V8 Turbocharged | 667598 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Return (Turbocharger To Pipe)Cylinders 1, 2, 3, and 4 | View on Amazon |
| REIN Fits: 3.0L L6 Turbocharged | CHT0972 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Return | View on Amazon |
| REIN Fits: 3.0L L6 Turbocharged | CHT0971 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Supply | View on Amazon |
| REIN Fits: 4.4L V8 Turbocharged | CHT0696 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Return (Turbocharger To Pipe)For Cylinder 1-4 | View on Amazon |
This table covers the Turbocharger Coolant lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early.
8 Turbocharger Coolant Line parts are listed for the 2019 BMW X7, from REIN and DORMAN. REIN CHT0698 carries the "Popular" badge.
Part numbers include REIN CHT0698, REIN CHT0697 and DORMAN 667596, among others listed above.
Turbocharger Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Popular Fits: 4.4L V8 Turbocharged | 01158200 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Exhaust | View on Amazon |
| ELRING Popular Fits: 3.0L L6 Turbocharged | 087320 | 🇺🇸 US 🇨🇦 CA | Body code: G07 | View on Amazon |
| ELRING Popular Fits: 3.0L L6 Turbocharged | 896110 | 🇺🇸 US 🇨🇦 CA | Charge Type: Exhaust Turbocharger | View on Amazon |
| AJUSA Fits: 4.4L V8 Turbocharged | JTC12221 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Mounting Gasket Set | View on Amazon |
| ELRING Fits: 3.0L L6 Turbocharged | 344890 | 🇺🇸 US 🇨🇦 CA | Inner Diameter [MM]: 37,5Material: FPM (fluoride rubber) | View on Amazon |
| ELRING Fits: 3.0L L6 Turbocharged | 720580 | 🇺🇸 US 🇨🇦 CA | Inner Diameter [MM]: 68Material: FPM (fluoride rubber) | View on Amazon |
| ELRING Fits: 3.0L L6 Turbocharged | 113510 | 🇺🇸 US 🇨🇦 CA | Body code: G07 | View on Amazon |
| ELRING Fits: 4.4L V8 Turbocharged | 233880 | 🇺🇸 US 🇨🇦 CA | Body code: G07 | View on Amazon |
| ELRING Fits: 4.4L V8 Turbocharged | 074140 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Fits Suction PipeInlet Gasketor Suction Pipe | View on Amazon |
| GPD Fits: 3.0L L6 Turbocharged | 2535112 | 🇺🇸 US 🇨🇦 CA | Only Fits Compatible Aftermarket Turbochargers | View on Amazon |
| MAHLE / CLEVITE Fits: 4.4L V8 Turbocharged | GS34020 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | SetTurbocharger Mounting Gasket Mounting Gasket Set | View on Amazon |
This table covers the gaskets that seal the Turbocharger. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
11 Turbocharger Gasket parts for the 2019 BMW X7 come from 4 brands — ELRING, AJUSA, GPD and 1 other brand. The "Popular" part is AJUSA 01158200.
Turbocharger Inlet Hose Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Fits: 3.0L L6 Turbocharged | 113670 | 🇺🇸 US 🇨🇦 CA | Body code: G07 | View on Amazon |
This table covers the gaskets that seal the Turbocharger Inlet Hose. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
One part is listed for the 2019 BMW X7 — ELRING 113670.
Turbocharger Mounting Hardware
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Fits: 3.0L L6 Turbocharged | 114510 | 🇺🇸 US 🇨🇦 CA | with gaskets/sealswith Bolts/Screws | View on Amazon |
| REIN Fits: 3.0L L6 Turbocharged | TRK0024 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the fasteners that mount the turbocharger.
2 Turbocharger Mounting Hardware parts for the 2019 BMW X7 come from 2 brands — ELRING and REIN.
Part numbers include ELRING 114510 and REIN TRK0024.
Turbocharger Oil Line
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| REIN Popular Fits: 4.4L V8 Turbocharged | TRP0364 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | For Cyl. 5-8Return Line | View on Amazon |
| REIN Popular Fits: 4.4L V8 Turbocharged | TRP0360 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | For Cyl. 1-4Return Line | View on Amazon |
| AJUSA Fits: 3.0L L6 Turbocharged | OP11237 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Engine # B58B30CSupply Tube | View on Amazon |
| DORMAN Fits: 4.4L V8 Turbocharged | 667606 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Return (Left)Cylinders 5, 6, 7, and 8 | View on Amazon |
| DORMAN Fits: 4.4L V8 Turbocharged | 667605 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Return (Right)Cylinders 1, 2, 3, and 4 | View on Amazon |
| REIN Fits: 3.0L L6 Turbocharged | TFP0393 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Supply Line | View on Amazon |
| REIN Fits: 3.0L L6 Turbocharged | TRP0391 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Return Line | View on Amazon |
| REIN Fits: 4.4L V8 Turbocharged | TFP0346 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | For Cyl. 5-8Supply Line | View on Amazon |
| REIN Fits: 4.4L V8 Turbocharged | TFP0345 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | For Cyl. 1-4Supply Line | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: 4.4L V8 Turbocharged | TIH113 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the Turbocharger Oil lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early.
10 Turbocharger Oil Line parts are listed for the 2019 BMW X7, from REIN, DORMAN, AJUSA and 1 other brand. REIN TRP0364 carries the "Popular" badge.
Turbocharger Oil Line Gasket / O-Ring
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 3.0L L6 Turbocharged | 16007800 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Turbocharger Coolant Line O-Ring | View on Amazon |
| ELRING Fits: 3.0L L6 Turbocharged | 876070 | 🇺🇸 US 🇨🇦 CA | Body code: G07 | View on Amazon |
| ELRING Fits: 3.0L L6 Turbocharged | 202790 | 🇺🇸 US 🇨🇦 CA | Inner Diameter [MM]: 9.5Material: FPM (fluoride rubber) | View on Amazon |
| ELRING Fits: 4.4L V8 Turbocharged | 239251 | 🇺🇸 US 🇨🇦 CA | Body code: G07 | View on Amazon |
This table covers the Turbocharger Oil Line Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove.
4 Turbocharger Oil Line Gasket / O-Ring parts are listed for the 2019 BMW X7, from ELRING and AJUSA.
Listed part numbers: AJUSA 16007800, ELRING 876070 and ELRING 202790, plus the other parts above.
Turbocharger Wastegate Solenoid / Actuator
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: 4.4L V8 Turbocharged | 667845 | 🇺🇸 US 🇨🇦 CA | Fits Right | View on Amazon |
| VEMO Fits: 4.4L V8 Turbocharged | V20400011 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the Turbocharger Wastegate Solenoid actuators. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same.
2 Turbocharger Wastegate Solenoid / Actuator parts are listed for the 2019 BMW X7, from DORMAN and VEMO.
Listed part numbers: DORMAN 667845 and VEMO V20400011.
Valve Cover
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SKP Fits: all 2019 X7 engines | SK743462 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| VAICO Fits: 3.0L L6 Turbocharged | V205366 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Plastic | View on Amazon |
This table covers the Valve covers.
2 Valve Cover parts for the 2019 BMW X7 come from 2 brands — SKP and VAICO. 1 part fits every engine; the other 1 is engine-specific.
This group includes SKP SK743462 and VAICO V205366.
Valve Cover Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Popular Fits: 3.0L L6 Turbocharged | 091010 | 🇺🇸 US 🇨🇦 CA | Material: DI HT | View on Amazon |
| MAHLE / CLEVITE Popular Fits: 3.0L L6 Turbocharged | VS50985 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | SetMolded Rubber | View on Amazon |
| AJUSA Fits: 3.0L L6 Turbocharged | 56080600 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Engine # B58B30C | View on Amazon |
| AJUSA Fits: 4.4L V8 Turbocharged | 56081400 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | LeftFor Cylinders 5 to 8 Only | View on Amazon |
| AJUSA Fits: 4.4L V8 Turbocharged | 56081500 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RightFor Cylinders 1 to 4 Only | View on Amazon |
| ELRING Fits: 3.0L L6 Turbocharged | 811530 | 🇺🇸 US 🇨🇦 CA | Material: Zinc-Copper brazing alloy (ZN-CU) | View on Amazon |
| ELRING Fits: 4.4L V8 Turbocharged | 795130 | 🇺🇸 US 🇨🇦 CA | RightBody code: G07 | View on Amazon |
| ELRING Fits: 4.4L V8 Turbocharged | 795120 | 🇺🇸 US 🇨🇦 CA | LeftBody code: G07 | View on Amazon |
| MAHLE / CLEVITE Fits: 3.0L L6 Turbocharged | VS50975 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Molded Rubber | View on Amazon |
| VICTOR REINZ Fits: 3.0L L6 Turbocharged | 151120501 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Set | View on Amazon |
This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
10 Valve Cover Gasket parts are listed for the 2019 BMW X7, from ELRING, AJUSA, MAHLE / CLEVITE and 1 other brand. ELRING 091010 carries the "Popular" badge.
Valve Lifter
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: all 2019 X7 engines | 85022300 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Engine # B58B30C | View on Amazon |
This table covers the lifters / tappets that transfer cam motion to the valves.
One part is listed for the 2019 BMW X7 — AJUSA 85022300.
Valve Stem Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Popular Fits: 3.0L L6 Turbocharged | 364500 | 🇺🇸 US 🇨🇦 CA | SetMaterial: FPM (fluoride rubber) | View on Amazon |
| ELRING Popular Fits: 3.0L L6 Turbocharged | 660360 | 🇺🇸 US 🇨🇦 CA | SetMaterial: FPM (fluoride rubber) | View on Amazon |
| AJUSA Fits: 3.0L L6 Turbocharged | 57051500 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Engine # B58B30C | View on Amazon |
| AJUSA Fits: 4.4L V8 Turbocharged | 12033700 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| AJUSA Fits: 4.4L V8 Turbocharged | 57069600 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| ELRING Fits: 3.0L L6 Turbocharged | 584820 | 🇺🇸 US 🇨🇦 CA | Set | View on Amazon |
| ELRING Fits: 4.4L V8 Turbocharged | 198770 | 🇺🇸 US 🇨🇦 CA | Height [MM]: 16Outer Diameter [MM]: 23 | View on Amazon |
| ELRING Fits: 4.4L V8 Turbocharged | 199440 | 🇺🇸 US 🇨🇦 CA | SetMaterial: FPM (fluoride rubber) | View on Amazon |
| MAHLE / CLEVITE Fits: 3.0L L6 Turbocharged | SS46007 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | SetMetal with Molded Rubber | View on Amazon |
| MAHLE / CLEVITE Fits: 3.0L L6 Turbocharged | SS46008 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | SetMetal with Molded Rubber | View on Amazon |
| VICTOR REINZ Fits: 3.0L L6 Turbocharged | 123686601 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | SetContains 12 Pieces | View on Amazon |
| VICTOR REINZ Fits: 3.0L L6 Turbocharged | 123725601 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | SetContains 12 Pieces | View on Amazon |
This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
12 Valve Stem Seal parts are listed for the 2019 BMW X7, from ELRING, AJUSA, MAHLE / CLEVITE and 1 other brand. ELRING 364500 carries the "Popular" badge.
Variable Valve Timing (VVT) Eccentric Shaft Actuator
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ÜRO PARTS Fits: 4.4L V8 Turbocharged | 11378652738 | 🇺🇸 US 🇨🇦 CA | For Valvetronic System | View on Amazon |
This table covers the Variable Valve Timing (VVT) Eccentric Shaft actuators. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same.
One part is listed for the 2019 BMW X7 — ÜRO PARTS 11378652738.
Variable Valve Timing (VVT) Solenoid / Actuator
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GATES Popular Fits: all 2019 X7 engines | VVS229 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| WALKER PRODUCTS Popular Fits: all 2019 X7 engines | 5901282 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| HOLSTEIN Fits: all 2019 X7 engines | 2VTS0370 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Adjuster Magnet | View on Amazon |
| VAICO Fits: 4.4L V8 Turbocharged | V204822 | 🇺🇸 US 🇨🇦 CA | Oil Control | View on Amazon |
| WELLS Fits: all 2019 X7 engines | 2T1249 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Located on Oil Pan | View on Amazon |
| WELLS Fits: 4.4L V8 Turbocharged | 2T1247 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Oil Control | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| VAICO Fits: all 2019 X7 engines | V203797 | 🇺🇸 US 🇨🇦 CA | Adjuster Magnet | View on Amazon |
| VAICO Fits: 4.4L V8 Turbocharged | V203994 | 🇺🇸 US 🇨🇦 CA | Oil Control | View on Amazon |
This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same.
8 Variable Valve Timing (VVT) Solenoid / Actuator parts are listed for the 2019 BMW X7, from VAICO, WELLS, GATES and 2 other brands. GATES VVS229 carries the "Popular" badge. 5 parts fit every engine; the other 3 are engine-specific.
Economy: 6 parts, from WELLS, GATES, WALKER PRODUCTS and 2 other brands. A representative part number is GATES VVS229.
The Standard Replacement section: 2 options from VAICO. VAICO V203797 is listed in this group.
Part numbers include GATES VVS229, WALKER PRODUCTS 5901282 and HOLSTEIN 2VTS0370, among others listed above.
Variable Valve Timing (VVT) Solenoid Gasket / Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: all 2019 X7 engines | 01907000 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the seals at the Variable Valve Timing (VVT) Solenoid Gasket. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
This group shows a single part: AJUSA 01907000.
Buying Engine Parts for a 2019 BMW X7
On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.
- Match the engine first. Some engine parts fit every engine; others are engine-specific. Each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Oil Filter and Crankshaft Seal .
Frequently Asked Questions
How many engine parts fit the 2019 BMW X7?
Our catalog currently lists 268 engine parts for the 2019 BMW X7 across 57 subcategories and 50 brands, covering both the 3.0L L6 Turbocharged and the 4.4L V8 Turbocharged. Each part is matched to the engine(s) it fits.
Do engine parts differ between 2019 BMW X7 engines?
Some do. 16 parts fit every engine; the other 252 are engine-specific. Each row (and the filter at the top) shows which. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of engine problems on a 2019 BMW X7?
Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What oil viscosity is listed for the 2019 BMW X7?
Oil rows on this page include SAE 0W-20, SAE 0W-30 and SAE 5W-30. Confirm the engine and the weight on the filler cap before you buy — high-mileage and standard fills can differ.
What should I replace at the same time?
Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2019 BMW X7 was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2019 BMW X7?
First match the engine — each row shows which engine(s) the part fits. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2019 BMW X7
Engine Parts for Other BMW X7 Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.