The 2024 BMW X7 has 101 engine parts with verified fitment on this page — 33 part types and 32 brands, covering both the 3.0L L6 Turbocharged and the 4.4L V8 Turbocharged. Each part includes a manufacturer part number and application notes.
The engine on the 2024 BMW X7 covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components. The largest groups are Oil Filter (21 parts), Oil (9 parts) and Variable Valve Timing (VVT) Solenoid / Actuator (7 parts). The other 30 part types cover the remaining 64 parts.
The 2024 BMW X7 was sold with both the 3.0L L6 Turbocharged and the 4.4L V8 Turbocharged. 6 parts fit every engine; the other 95 are engine-specific. Each part shows which engine(s) it fits.
The most listed brands for 2024 BMW X7 engine parts are AJUSA (40 parts), LIQUI MOLY (6 parts) and MAHLE / CLEVITE (4 parts), plus 29 more brands. Quality grades include Standard Replacement, Economy and High Performance / Heavy Duty.
9 parts on this 2024 BMW X7 page carry a "Popular" badge — the source catalog's flag for options frequently chosen for this vehicle — including LIQUI MOLY 22046 (Oil) and PRO-TEC PXL57189 (Oil Filter). Click any part number to see every vehicle that part fits.
Conversion / Lower Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 3.0L L6 Turbocharged | 54346700 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Engine # B58B30P | View on Amazon |
| AJUSA Fits: 4.4L V8 Turbocharged | 54346800 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers lower / conversion gasket sets for oil-pan and related joints. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
2 Conversion / Lower Gasket Set parts for the 2024 BMW X7 come from AJUSA.
Part numbers include AJUSA 54346700 and AJUSA 54346800.
Crankshaft Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 3.0L L6 Turbocharged | 15075200 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | FrontClockwise | View on Amazon |
| AJUSA Fits: 3.0L L6 Turbocharged | 15107900 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RearCounter Clockwise | View on Amazon |
This table covers the front and rear seals that keep oil in at the crankshaft. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
AJUSA supplies both parts for the 2024 BMW X7.
Listed part numbers: AJUSA 15075200 and AJUSA 15107900.
Cylinder Head Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 3.0L L6 Turbocharged | 81089800 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Engine # B58B30P | View on Amazon |
| AJUSA Fits: 4.4L V8 Turbocharged | 81061000 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the bolts that clamp the cylinder head to the block.
2 Cylinder Head Bolt parts for the 2024 BMW X7 come from AJUSA.
This group includes AJUSA 81089800 and AJUSA 81061000.
Cylinder Head Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 3.0L L6 Turbocharged | 10280400 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Multi Layered Steel | View on Amazon |
| AJUSA Fits: 3.0L L6 Turbocharged | 10280410 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Multi Layered Steel | View on Amazon |
| AJUSA Fits: 4.4L V8 Turbocharged | 10272400 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Multi Layered Steel | View on Amazon |
| AJUSA Fits: 4.4L V8 Turbocharged | 10272410 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Multi Layered Steel | View on Amazon |
| AJUSA Fits: 4.4L V8 Turbocharged | 52644700 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Right | View on Amazon |
| AJUSA Fits: 4.4L V8 Turbocharged | 52644800 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Left | View on Amazon |
This table covers the head gaskets that seal the block to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
6 Cylinder Head Gasket parts for the 2024 BMW X7 come from AJUSA.
This group includes AJUSA 10280400, AJUSA 10280410 and AJUSA 10272400 and the remaining parts above.
Cylinder Head Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 3.0L L6 Turbocharged | 52679600 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Engine # B58B30P | View on Amazon |
| AJUSA Fits: 4.4L V8 Turbocharged | 52635100 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Complete Set | View on Amazon |
This table covers multi-piece gasket sets for a cylinder-head job. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
2 Cylinder Head Gasket Set parts for the 2024 BMW X7 come from AJUSA.
This group includes AJUSA 52679600 and AJUSA 52635100.
Engine Cover
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| TECHPRO Fits: all 2024 X7 engines | BM1228191 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front LowerG05 | View on Amazon |
This table covers the Engine covers.
This group shows a single part: TECHPRO BM1228191.
Engine Kit Gasket Set
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 3.0L L6 Turbocharged | 50600600 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Engine # B58B30P | View on Amazon |
| AJUSA Fits: 4.4L V8 Turbocharged | 50601400 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers full gasket kits covering the joints opened in an engine rebuild. Typical signs include the leaks that sent the engine or gearbox to the bench. Use every gasket the set is meant for that opening — leftover unused pieces usually belong to another configuration.
2 Engine Kit Gasket Set parts for the 2024 BMW X7 come from AJUSA.
Part numbers include AJUSA 50600600 and AJUSA 50601400.
Harmonic Balancer Bolt
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| REIN Fits: 3.0L L6 Turbocharged | HWB0074 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 10 x 65mm | View on Amazon |
This table covers the Harmonic Balancer bolts.
One part is listed for the 2024 BMW X7 — REIN HWB0074.
Intake Manifold Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 3.0L L6 Turbocharged | 24058100 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Material: Fluoroelastomer (FKM)VI | View on Amazon |
| AJUSA Fits: 4.4L V8 Turbocharged | 13314000 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the gaskets between the intake manifold and the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
2 Intake Manifold Gasket parts for the 2024 BMW X7 come from AJUSA.
This group includes AJUSA 24058100 and AJUSA 13314000.
Motor Mount
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ANCHOR Fits: 3.0L L6 Turbocharged | 10258 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front RightHydraulic | View on Amazon |
| ANCHOR Fits: 3.0L L6 Turbocharged | 10260 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front LeftHydraulic | View on Amazon |
| DEA / MARMON RIDE CONTROL Fits: 3.0L L6 Turbocharged | A70079 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Left | View on Amazon |
| DEA / MARMON RIDE CONTROL Fits: 3.0L L6 Turbocharged | A70084 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Right | View on Amazon |
This table covers the mounts that hold the engine to the chassis. Typical signs include a clunk on takeoff, a vibration at idle, or a separated rubber insert. Support the powertrain before unbolting a mount, and torque the fasteners in the notes.
4 Motor Mount parts are listed for the 2024 BMW X7, from ANCHOR and DEA / MARMON RIDE CONTROL.
Listed part numbers: ANCHOR 10258, ANCHOR 10260 and DEA / MARMON RIDE CONTROL A70079, plus the other parts above.
Oil
Summary: Notes list SAE 0W-20, SAE 0W-30 and SAE 5W-30. Confirm the engine and the weight on the filler cap before you buy. Replacement brands in this table include LIQUI MOLY and VALVOLINE.
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| LIQUI MOLY Popular Fits: 3.0L L6 Turbocharged | 22046 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Top Tec 6600 0W-205 Liter | View on Amazon |
| VALVOLINE Popular Fits: 4.4L V8 Turbocharged | 787301 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | European Vehicle Full Synthetic SAE 5W-301 Quart | View on Amazon |
| LIQUI MOLY Fits: 3.0L L6 Turbocharged | 22044 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Top Tec 6600 0W-201 Liter | View on Amazon |
| LIQUI MOLY Fits: 3.0L L6 Turbocharged | 22048 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Top Tec 6600 0W-2020 Liter | View on Amazon |
| LIQUI MOLY Fits: 4.4L V8 Turbocharged | 22260 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Special Tec B FE 0W-301 Liter | View on Amazon |
| LIQUI MOLY Fits: 4.4L V8 Turbocharged | 22261 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Special Tec B FE 0W-305 Liter | View on Amazon |
| LIQUI MOLY Fits: 4.4L V8 Turbocharged | 22269 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Special Tec B FE 0W-3020 Liter | View on Amazon |
| VALVOLINE Fits: 3.0L L6 Turbocharged | 888048 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | European Vehicle Full Synthetic SAE 0W-201 Quart | View on Amazon |
| VALVOLINE Fits: all 2024 X7 engines | 893931 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | European Vehicle Full Synthetic SAE 0W-301 Quart | View on Amazon |
This table covers the engine oils listed by grade and specification for this engine. Typical signs include a low-oil lamp, knocking after a long interval, or oil that has gone thin and black well before the next service. Match the viscosity and spec in the notes (and on the filler cap). The tables group grades — they are not interchangeable.
9 Oil parts are listed for the 2024 BMW X7, from LIQUI MOLY and VALVOLINE. LIQUI MOLY 22046 carries the "Popular" badge. 1 part fits every engine; the other 8 are engine-specific.
Part numbers include LIQUI MOLY 22046, VALVOLINE 787301 and LIQUI MOLY 22044, among others listed above.
Oil Drain Plug
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: 3.0L L6 Turbocharged | 090088 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | MetalStandard | View on Amazon |
| REIN Fits: 3.0L L6 Turbocharged | HWU1041 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the drain plugs in the oil pan.
2 Oil Drain Plug parts are listed for the 2024 BMW X7, from DORMAN and REIN.
Part numbers include DORMAN 090088 and REIN HWU1041.
Oil Drain Plug Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 3.0L L6 Turbocharged | 21010400 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Engine # B58B30Pwith Original Equipment (OE) # 7119963132 | View on Amazon |
| AJUSA Fits: 4.4L V8 Turbocharged | 22008600 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the crush washers and gaskets under the oil drain plug. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
2 Oil Drain Plug Gasket parts for the 2024 BMW X7 come from AJUSA.
This group includes AJUSA 21010400 and AJUSA 22008600.
Oil Filler Cap
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOTORAD Fits: all 2024 X7 engines | MO214 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the caps on the oil filler neck.
One part is listed for the 2024 BMW X7 — MOTORAD MO214.
Oil Filter
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| PRO-TEC Popular Fits: 4.4L V8 Turbocharged | PXL57189 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| CHAMP / LUBER-FINER Fits: 4.4L V8 Turbocharged | P987 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| FAMOUS BRAND Fits: 4.4L V8 Turbocharged | 84189 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| FVP Fits: 3.0L L6 Turbocharged | G0342 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| PRO-TEC Fits: 3.0L L6 Turbocharged | PXL10342 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| PUROLATOR Fits: 4.4L V8 Turbocharged | L25904 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| ULTRA-POWER Fits: 4.4L V8 Turbocharged | 57189 | 🇺🇸 US 🇨🇦 CA | OE # 11-42 7 583 220 | View on Amazon |
| VARIOUS MFR Fits: 4.4L V8 Turbocharged | PG5904 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| VARIOUS MFR Fits: 4.4L V8 Turbocharged | PO5904EX | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Extended Life | View on Amazon |
High Performance / Heavy Duty
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOBIL Fits: 3.0L L6 Turbocharged | M1C457A | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Extended Performance | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| HENGST Popular Fits: 3.0L L6 Turbocharged | E859HD352 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes Gasket SetCartridge | View on Amazon |
| MAHLE / CLEVITE Popular Fits: 4.4L V8 Turbocharged | OX3537D | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Cartridge | View on Amazon |
| MANN Popular Fits: 3.0L L6 Turbocharged | HU6022Z | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| WIX Popular Fits: 4.4L V8 Turbocharged | 57189 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| FEL-PRO Fits: 4.4L V8 Turbocharged | OFCS2006 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes Cap and Filter | View on Amazon |
| HASTINGS / BALDWIN Fits: 3.0L L6 Turbocharged | P40076 | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| HASTINGS / BALDWIN Fits: 4.4L V8 Turbocharged | LF665 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Element | View on Amazon |
| MAHLE / CLEVITE Fits: 3.0L L6 Turbocharged | OX1146D | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Cartridge | View on Amazon |
| MANN Fits: 4.4L V8 Turbocharged | HU8007Z | 🇺🇸 US 🇨🇦 CA | View on Amazon | |
| VARIOUS MFR Fits: 3.0L L6 Turbocharged | PG99256EX | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Extended Life | View on Amazon |
| WIX Fits: 3.0L L6 Turbocharged | WL10342 | 🇺🇸 US 🇨🇦 CA | View on Amazon |
This table covers the oil filters that screw onto this engine's filter mount. Typical signs include low oil pressure after a service, or a filter that will not spin off because the old gasket stayed on the block. Lube the new gasket and tighten to the spec on the box; a double-gasket install dumps the sump on the first drive.
21 Oil Filter parts are listed for the 2024 BMW X7, from VARIOUS MFR, PRO-TEC, MAHLE / CLEVITE and 11 other brands. PRO-TEC PXL57189 carries the "Popular" badge.
In the Economy grade, PRO-TEC, VARIOUS MFR, CHAMP / LUBER-FINER and 4 other brands supply 9 parts: the catalog's value-priced group. A representative part number is PRO-TEC PXL57189.
In the High Performance / Heavy Duty grade, MOBIL supplies 1 part: grouped under the catalog's "High Performance / Heavy Duty" designation — the notes column spells out what sets them apart. A representative part number is MOBIL M1C457A.
The Standard Replacement section lists 11 options from MAHLE / CLEVITE, MANN, WIX and 4 other brands — built to original-equipment specification. HENGST E859HD352 is listed in this group.
Oil Filter Cover
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MOTORAD Fits: 3.0L L6 Turbocharged | MO388 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| REIN Fits: 3.0L L6 Turbocharged | CPL0070 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the Oil Filter covers.
2 Oil Filter Cover parts for the 2024 BMW X7 come from 2 brands — MOTORAD and REIN.
Part numbers include MOTORAD MO388 and REIN CPL0070.
Oil Filter Housing
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: 3.0L L6 Turbocharged | 926453 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | OE FIX | View on Amazon |
| HENGST Fits: 3.0L L6 Turbocharged | H811H | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | with E859H D352 Filter, Oil Cooler and Bolts/Screws | View on Amazon |
This table covers the Oil Filter housings.
2 Oil Filter Housing parts for the 2024 BMW X7 come from 2 brands — DORMAN and HENGST.
Part numbers include DORMAN 926453 and HENGST H811H.
Oil Level Sensor
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| HELLA Fits: 4.4L V8 Turbocharged | 013680141 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 3-Pin ConnectorIncludes Seal | View on Amazon |
This table covers the Oil Level sensors. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors.
One part is listed for the 2024 BMW X7 — HELLA 013680141.
Oil Level Sensor Gasket / O-Ring
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 4.4L V8 Turbocharged | 16078650 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the Oil Level Sensor Gasket O-rings. Typical signs include a seep at a fitting or a housing that weeps after a service. Lube the new O-ring with the fluid it will see, and do not roll it into the groove.
One part is listed for the 2024 BMW X7 — AJUSA 16078650.
Oil Pan Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 4.4L V8 Turbocharged | 59019400 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the gaskets between the oil pan and the block. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
One part is listed for the 2024 BMW X7 — AJUSA 59019400.
Oil Pump Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 3.0L L6 Turbocharged | 77086300 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Engine # B58B30P | View on Amazon |
This table covers the gaskets that seal the Oil Pump. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
This group shows a single part: AJUSA 77086300.
Timing Cover Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 4.4L V8 Turbocharged | 77031300 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the gaskets that seal the Timing Cover. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
One part is listed for the 2024 BMW X7 — AJUSA 77031300.
Timing Cover Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Fits: 4.4L V8 Turbocharged | TCS46311 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Front | View on Amazon |
| MAHLE / CLEVITE Fits: 4.4L V8 Turbocharged | 67930 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | PTFE (Polytetrafluoroethylene) | View on Amazon |
This table covers the seals at the Timing Cover. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
2 Timing Cover Seal parts are listed for the 2024 BMW X7, from FEL-PRO and MAHLE / CLEVITE.
Listed part numbers: FEL-PRO TCS46311 and MAHLE / CLEVITE 67930.
Turbocharger Boost Sensor
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| WELLS Fits: 4.4L V8 Turbocharged | 5S13286 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| BECK/ARNLEY Fits: 4.4L V8 Turbocharged | 1581726 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| HELLA Fits: 4.4L V8 Turbocharged | 358152381 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 4-Pin ConnectorBolted | View on Amazon |
This table covers the Turbocharger Boost sensors. Typical signs include a warning lamp, a stored code, or a reading that drops out when the harness is wiggled. Inspect the connector and ground before replacing the sensor — wiring faults are often condemned as bad sensors.
3 Turbocharger Boost Sensor parts for the 2024 BMW X7 come from 3 brands — WELLS, BECK/ARNLEY and HELLA.
The Economy section: 1 option from WELLS. WELLS 5S13286 is listed in this group.
Standard Replacement: 2 parts, from BECK/ARNLEY and HELLA. A representative part number is BECK/ARNLEY 1581726.
Listed part numbers: WELLS 5S13286, BECK/ARNLEY 1581726 and HELLA 358152381.
Turbocharger Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 3.0L L6 Turbocharged | JTC12855 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Mounting Gasket Set | View on Amazon |
| AJUSA Fits: 4.4L V8 Turbocharged | 01158200 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Exhaust | View on Amazon |
| AJUSA Fits: 4.4L V8 Turbocharged | JTC12319 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Mounting Gasket Set | View on Amazon |
| ELRING Fits: 3.0L L6 Turbocharged | 113510 | 🇲🇽 MX | View on Amazon | |
| ELRING Fits: all 2024 X7 engines | 074140 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Suction PipeInlet Gasket | View on Amazon |
This table covers the gaskets that seal the Turbocharger. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
5 Turbocharger Gasket parts for the 2024 BMW X7 come from 2 brands — AJUSA and ELRING. 1 part fits every engine; the other 4 are engine-specific.
Listed part numbers: AJUSA JTC12855, AJUSA 01158200 and AJUSA JTC12319, plus the other parts above.
Turbocharger Inlet Hose Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| ELRING Fits: 3.0L L6 Turbocharged | 113670 | 🇲🇽 MX | View on Amazon |
This table covers the gaskets that seal the Turbocharger Inlet Hose. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
One part is listed for the 2024 BMW X7 — ELRING 113670.
Turbocharger Oil Line
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 3.0L L6 Turbocharged | OP11489 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Engine # B58B30PSupply Tube | View on Amazon |
| AJUSA Fits: 4.4L V8 Turbocharged | OP11470 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | for Cylinders 5 To 8 OnlyReturn Line | View on Amazon |
| AJUSA Fits: 4.4L V8 Turbocharged | OP11473 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | for Cylinders 1 To 4 OnlySupply Tube | View on Amazon |
This table covers the Turbocharger Oil lines. Typical signs include a wet fitting, a rusted pipe, or a pressure loss in this circuit. Flare or thread the new line the way the notes specify; a kinked replacement will fail early.
AJUSA supplies the 3 Turbocharger Oil Line parts for the 2024 BMW X7.
Part numbers include AJUSA OP11489, AJUSA OP11470 and AJUSA OP11473.
Valve Cover
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| SKP Fits: all 2024 X7 engines | SK743462 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the Valve covers.
This group shows a single part: SKP SK743462.
Valve Cover Gasket
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 3.0L L6 Turbocharged | 56103300 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Engine # B58B30P | View on Amazon |
| AJUSA Fits: 4.4L V8 Turbocharged | 56081400 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | LeftFor Cylinders 5 to 8 Only | View on Amazon |
| AJUSA Fits: 4.4L V8 Turbocharged | 56081500 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RightFor Cylinders 1 to 4 Only | View on Amazon |
This table covers the gaskets that seal the valve cover to the cylinder head. Typical signs include seepage at the joint, a burnt-oil smell, or a leak that appears only after a long drive. Clean both flanges and torque in the sequence the notes or the manual call for.
AJUSA supplies the 3 Valve Cover Gasket parts for the 2024 BMW X7.
Part numbers include AJUSA 56103300, AJUSA 56081400 and AJUSA 56081500.
Valve Lifter
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 3.0L L6 Turbocharged | 85022300 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Engine # B58B30P | View on Amazon |
This table covers the lifters / tappets that transfer cam motion to the valves.
One part is listed for the 2024 BMW X7 — AJUSA 85022300.
Valve Stem Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 3.0L L6 Turbocharged | 57051500 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Engine # B58B30P | View on Amazon |
| AJUSA Fits: 3.0L L6 Turbocharged | 12027900 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Intake4.5 X 9.8 X 21.5 | View on Amazon |
| AJUSA Fits: 3.0L L6 Turbocharged | 12028200 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Exhaust5.2 X 9.8 X 21.15 | View on Amazon |
| AJUSA Fits: 4.4L V8 Turbocharged | 12033700 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| AJUSA Fits: 4.4L V8 Turbocharged | 57069600 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| MAHLE / CLEVITE Fits: 3.0L L6 Turbocharged | SS46008 | 🇺🇸 US 🇨🇦 CA | SetMetal with Molded Rubber | View on Amazon |
This table covers the seals on each valve stem that control oil into the guides. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
6 Valve Stem Seal parts are listed for the 2024 BMW X7, from AJUSA and MAHLE / CLEVITE.
This group includes AJUSA 57051500, AJUSA 12027900 and AJUSA 12028200 and the remaining parts above.
Variable Valve Timing (VVT) Solenoid / Actuator
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GATES Popular Fits: 4.4L V8 Turbocharged | VVS229 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| ÜRO PARTS Popular Fits: 4.4L V8 Turbocharged | 11367614288 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | For Vanos System | View on Amazon |
| HOLSTEIN Fits: 4.4L V8 Turbocharged | 2VTS0370 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Adjuster Magnet | View on Amazon |
| VNE Fits: 3.0L L6 Turbocharged | 4022005 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Oil Pump Control Valve | View on Amazon |
| WELLS Fits: all 2024 X7 engines | 2T1249 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| WELLS Fits: 4.4L V8 Turbocharged | 2T1286 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Adjuster Magnet | View on Amazon |
| WELLS Fits: 4.4L V8 Turbocharged | 2T1247 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Oil Control | View on Amazon |
This table covers the oil-control solenoids that command the cam phasers. Typical signs include a door or range that will not move, or a click with no motion. Confirm the command signal before replacing the actuator — a failed module looks the same.
7 Variable Valve Timing (VVT) Solenoid / Actuator parts are listed for the 2024 BMW X7, from WELLS, GATES, ÜRO PARTS and 2 other brands. GATES VVS229 carries the "Popular" badge. 1 part fits every engine; the other 6 are engine-specific.
Part numbers include GATES VVS229, ÜRO PARTS 11367614288 and HOLSTEIN 2VTS0370, among others listed above.
Variable Valve Timing (VVT) Solenoid Gasket / Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| AJUSA Fits: 4.4L V8 Turbocharged | 01907000 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the seals at the Variable Valve Timing (VVT) Solenoid Gasket. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
This group shows a single part: AJUSA 01907000.
Buying Engine Parts for a 2024 BMW X7
On this vehicle, the engine covers the internals and hard parts that build compression and keep oil where it belongs — gaskets, bearings, camshafts, lifters, seals and timing components.
- Match the engine first. Some engine parts fit every engine; others are engine-specific. Each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Oil Filter and Oil .
Frequently Asked Questions
How many engine parts fit the 2024 BMW X7?
Our catalog currently lists 101 engine parts for the 2024 BMW X7 across 33 subcategories and 32 brands, covering both the 3.0L L6 Turbocharged and the 4.4L V8 Turbocharged. Each part is matched to the engine(s) it fits.
Do engine parts differ between 2024 BMW X7 engines?
Some do. 6 parts fit every engine; the other 95 are engine-specific. Each row (and the filter at the top) shows which. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of engine problems on a 2024 BMW X7?
Common symptoms include oil spots under the vehicle, blue or white exhaust smoke, ticking from the valvetrain, or coolant mysteriously disappearing. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What oil viscosity is listed for the 2024 BMW X7?
Oil rows on this page include SAE 0W-20, SAE 0W-30 and SAE 5W-30. Confirm the engine and the weight on the filler cap before you buy — high-mileage and standard fills can differ.
What should I replace at the same time?
Where labor overlaps, replace the seals and gaskets for anything you open up; a timing job should always include the tensioner and guides, not just the belt or chain.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2024 BMW X7 was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2024 BMW X7?
First match the engine — each row shows which engine(s) the part fits. Then engine hard parts are unforgiving of guesswork — confirm the casting or engine code before ordering, because one model year can hide two different blocks. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2024 BMW X7
Engine Parts for Other BMW X7 Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.