The 2025 BMW X6 has 34 cooling system parts with verified fitment on this page — 9 part types and 16 brands, covering both the 3.0L L6 Turbocharged and the 4.4L V8 Turbocharged. Each part includes a manufacturer part number and application notes.
The cooling system system on the 2025 BMW X6 keeps operating temperature in the narrow band the engine was designed for, from radiator and water pump to thermostat and hoses. The largest groups are Coolant Reservoir Cap (7 parts), Coolant Reservoir (6 parts) and Radiator (5 parts). The other 6 part types cover the remaining 16 parts.
The 2025 BMW X6 was sold with both the 3.0L L6 Turbocharged and the 4.4L V8 Turbocharged. 14 parts fit every engine; the other 20 are engine-specific. Each part shows which engine(s) it fits.
16 brands supply cooling system parts for the 2025 BMW X6, led by REIN (6 parts), CALORSTAT (4 parts) and MAHLE / CLEVITE (3 parts), plus 13 more brands. Quality grades include Economy, Heavy Duty and Standard Replacement.
A "Popular" badge means the source catalog flagged the part as frequently chosen for the 2025 BMW X6. 4 parts have it, including MAHLE / CLEVITE CRT302000S (Coolant Reservoir) and REIN CPE0035 (Coolant Reservoir Cap). Each part number opens a page with every vehicle that part fits.
Coolant / Antifreeze
Economy
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| VALVOLINE Fits: 4.4L V8 Turbocharged | 719009 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Multi-Vehicle Yellow1 Gallon | View on Amazon |
Heavy Duty
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| PRESTONE Fits: all 2025 X6 engines | AFC12100 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Command Nitrite Free Extended Life CoolantYellow Nitrite Free OAT | View on Amazon |
Standard Replacement
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| VALVOLINE Fits: all 2025 X6 engines | 904685 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | HT-12 Green1 Gallon | View on Amazon |
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| PRESTONE Fits: all 2025 X6 engines | 78065 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Heavy Duty | View on Amazon |
This table covers the engine coolants and antifreeze formulations specified for this cooling system. Typical signs include a rising temperature gauge, rusty or sludged coolant, or a heater that blows cold. Use the chemistry named in the notes. Mixing silicate, OAT and HOAT formulas can gel in the radiator.
4 Coolant / Antifreeze parts are listed for the 2025 BMW X6, from VALVOLINE and PRESTONE. 3 parts fit every engine; the other 1 is engine-specific.
In the Economy grade, VALVOLINE supplies 1 part: the catalog's value-priced group. A representative part number is VALVOLINE 719009.
The Heavy Duty section lists 1 option from PRESTONE — rated for severe service. PRESTONE AFC12100 is listed in this group.
The Standard Replacement section lists 1 option from VALVOLINE — built to original-equipment specification. VALVOLINE 904685 is listed in this group.
1 ungrouped part is not assigned to a grade, with the same engine-level match.
This group includes VALVOLINE 719009, PRESTONE AFC12100 and VALVOLINE 904685 and the remaining parts above.
Coolant Air Bleeder
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| DORMAN Fits: 4.4L V8 Turbocharged | 902404 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Plastic | View on Amazon |
| DORMAN Fits: 4.4L V8 Turbocharged | 902404HP | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | OE FIX | View on Amazon |
This table covers the bleeders used to purge air from the coolant circuit.
2 Coolant Air Bleeder parts for the 2025 BMW X6 come from DORMAN.
Part numbers include DORMAN 902404 and DORMAN 902404HP.
Coolant Reservoir
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| MAHLE / CLEVITE Popular Fits: 4.4L V8 Turbocharged | CRT302000S | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Plastic | View on Amazon |
| REIN Popular Fits: all 2025 X6 engines | EPK0277 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes OE cap and fluid level sensor | View on Amazon |
| MAHLE / CLEVITE Fits: all 2025 X6 engines | CRT295000S | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Plastic | View on Amazon |
| REIN Fits: all 2025 X6 engines | EPT0277 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Intercoolerwithout Cap | View on Amazon |
| TECHPRO Fits: all 2025 X6 engines | BM3014117 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | G06Coolant/Intercooler | View on Amazon |
| TECHPRO Fits: all 2025 X6 engines | BM3014118 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes Cap | View on Amazon |
This table covers the overflow / expansion tanks that hold extra coolant.
6 Coolant Reservoir parts for the 2025 BMW X6 come from 3 brands — MAHLE / CLEVITE, REIN and TECHPRO. The "Popular" part is MAHLE / CLEVITE CRT302000S. 5 parts fit every engine; the other 1 is engine-specific.
This group includes MAHLE / CLEVITE CRT302000S, REIN EPK0277 and MAHLE / CLEVITE CRT295000S and the remaining parts above.
Coolant Reservoir Cap
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| REIN Popular Fits: 3.0L L6 Turbocharged | CPE0035 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RADIATOR | View on Amazon |
| REIN Popular Fits: 4.4L V8 Turbocharged | CPE0034 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RADIATOR | View on Amazon |
| CALORSTAT Fits: all 2025 X6 engines | RC0084 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | RADIATOR | View on Amazon |
| CALORSTAT Fits: 3.0L L6 Turbocharged | RC0083 | 🇺🇸 US 🇨🇦 CA | Maximum Pressure Rating: 20.0 PS | View on Amazon |
| CALORSTAT Fits: 4.4L V8 Turbocharged | RC0087 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Maximum Pressure Rating: 30.0 PS | View on Amazon |
| MOTORAD Fits: all 2025 X6 engines | T76 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Standard | View on Amazon |
| REIN Fits: all 2025 X6 engines | CPE0078 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Intercooler | View on Amazon |
This table covers the caps on the overflow / expansion tank. Typical signs include a leak at the neck, a cap that will not hold pressure, or a missing tether. Match the pressure rating or thread in the notes — radiator, reservoir and fuel caps are not interchangeable.
7 Coolant Reservoir Cap parts for the 2025 BMW X6 come from 3 brands — REIN, CALORSTAT and MOTORAD. The "Popular" part is REIN CPE0035. 3 parts fit every engine; the other 4 are engine-specific.
Part numbers include REIN CPE0035, REIN CPE0034 and CALORSTAT RC0084, among others listed above.
Radiator
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CSF Fits: all 2025 X6 engines | 4009 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Auxiliary Radiator | View on Amazon |
| CSF Fits: 3.0L L6 Turbocharged | 4011 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Low Temperature Radiator | View on Amazon |
| FVP Fits: 3.0L L6 Turbocharged | RAD13989 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | MAIN RADIATOR | View on Amazon |
| FVP Fits: 3.0L L6 Turbocharged | RAD14004 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon | |
| UAC Fits: 3.0L L6 Turbocharged | RA13989C | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the radiators that dump engine heat to airflow through the core. Typical signs include overheating in traffic, a wet core, or coolant that disappears with no puddle. Replace the cap if it cannot hold the rated pressure, and bleed the system after the swap.
5 Radiator parts are listed for the 2025 BMW X6, from CSF, FVP and UAC. 1 part fits every engine; the other 4 are engine-specific.
Listed part numbers: CSF 4009, CSF 4011 and FVP RAD13989, plus the other parts above.
Temperature Sender / Sensor
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| NISSENS Fits: all 2025 X6 engines | 207110 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Location-Cylinder Head | View on Amazon |
| STANDARD MOTOR PRODUCTS Fits: all 2025 X6 engines | TS658 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | with Gauge | View on Amazon |
This table covers the senders that report coolant temperature to the gauge or ECU. Typical signs include a gauge that sits on empty or overheat, or a lamp that does not match what the engine is doing. Rule out the cluster and the wiring before replacing the sender.
2 Temperature Sender / Sensor parts are listed for the 2025 BMW X6, from NISSENS and STANDARD MOTOR PRODUCTS. All of them fit every engine offered in the 2025 X6.
This group includes NISSENS 207110 and STANDARD MOTOR PRODUCTS TS658.
Thermostat
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| CALORSTAT Fits: 4.4L V8 Turbocharged | TE7331105J | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | 220.0 F Degrees | View on Amazon |
| FOUR SEASONS Fits: 4.4L V8 Turbocharged | 85956 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes Housing | View on Amazon |
| MOTORAD Fits: 3.0L L6 Turbocharged | TA3156 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes Seal | View on Amazon |
| MOTORAD Fits: 4.4L V8 Turbocharged | 606221 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Includes Housing, Sensor, Seal | View on Amazon |
| REIN Fits: 4.4L V8 Turbocharged | CTA0028 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | View on Amazon |
This table covers the thermostats that open the coolant circuit at the specified temperature. Typical signs include slow warm-up, a gauge that climbs in traffic, or heat that never quite arrives. Replace the housing gasket with the thermostat and bleed the system so a trapped air pocket does not cook the new part.
5 Thermostat parts for the 2025 BMW X6 come from 4 brands — MOTORAD, CALORSTAT, FOUR SEASONS and 1 other brand.
Listed part numbers: CALORSTAT TE7331105J, FOUR SEASONS 85956 and MOTORAD TA3156, plus the other parts above.
Thermostat / Thermostat Housing / Water Outlet Seal
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| FEL-PRO Fits: 4.4L V8 Turbocharged | 36226 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Thermostat Seal | View on Amazon |
| MAHLE / CLEVITE Fits: 4.4L V8 Turbocharged | C32504 | 🇺🇸 US 🇨🇦 CA 🇲🇽 MX | Molded Rubber | View on Amazon |
This table covers the seals at the thermostat housing and water outlet. Typical signs include a wet housing, a drip after sitting, or fluid flung off a rotating shaft. Fix the surface the seal rides on. A new seal on a grooved shaft will leak again.
2 Thermostat / Thermostat Housing / Water Outlet Seal parts are listed for the 2025 BMW X6, from FEL-PRO and MAHLE / CLEVITE.
This group includes FEL-PRO 36226 and MAHLE / CLEVITE C32504.
Water Pump
| Brand | Part Number | Markets | Notes | Buy |
|---|---|---|---|---|
| GRAF Fits: 3.0L L6 Turbocharged | AWP061 | 🇲🇽 MX | Electric Pump | View on Amazon |
This table covers the pumps that circulate coolant through the block and radiator. Typical signs include coolant at the weep hole, pulley play, or a growl from the front of the engine. Replace the thermostat and refill with the specified coolant whenever the pump comes off.
This group shows a single part: GRAF AWP061.
Buying Cooling System Parts for a 2025 BMW X6
On this vehicle, the cooling system system keeps operating temperature in the narrow band the engine was designed for, from radiator and water pump to thermostat and hoses.
- Match the engine first. Some cooling system parts fit every engine; others are engine-specific. Each row shows which engine(s) it fits.
- Read the notes on each row for position, trim and spec qualifiers before you order.
- Where labor overlaps, replace the thermostat and refill with fresh coolant whenever you change a water pump or radiator; original hoses on an older vehicle are on borrowed time.
- Cross-reference the manufacturer part number against your old part or a service-manual listing.
Start with the largest groups on this page: Coolant Reservoir Cap and Coolant Reservoir .
Frequently Asked Questions
How many cooling system parts fit the 2025 BMW X6?
Our catalog currently lists 34 cooling system parts for the 2025 BMW X6 across 9 subcategories and 16 brands, covering both the 3.0L L6 Turbocharged and the 4.4L V8 Turbocharged. Each part is matched to the engine(s) it fits.
Do cooling system parts differ between 2025 BMW X6 engines?
Some do. 14 parts fit every engine; the other 20 are engine-specific. Each row (and the filter at the top) shows which. If you're unsure which engine you have, check the emissions label under the hood or the 8th character of your VIN.
What are the signs of cooling system problems on a 2025 BMW X6?
Common symptoms include a rising temperature gauge in traffic, sweet-smelling steam, crusty deposits around hose clamps, or a heater that blows cold. If you notice any of these, identify the affected subcategory above and cross-reference the part numbers listed.
What should I replace at the same time?
Where labor overlaps, replace the thermostat and refill with fresh coolant whenever you change a water pump or radiator; original hoses on an older vehicle are on borrowed time.
What do the market flags (US, CA, MX) on each part mean?
They show the market for which the manufacturer published application data for that part — where the vehicle was first sold, not where the part was made. If your 2025 BMW X6 was originally sold in the US, the safest choice is a part marked for the US market.
How do I make sure a part fits my 2025 BMW X6?
First match the engine — each row shows which engine(s) the part fits. Then replace coolant with the exact specification the manufacturer calls for — mixing chemistries can gel and block small passages. The notes column carries position and trim qualifiers where they apply.
Other Parts for the 2025 BMW X6
Cooling System Parts for Other BMW X6 Years
Switch vehicle or jump to a subcategory
Manufacturer names, model designations and part numbers are used for identification and fitment reference only. AutoFactsDB is an independent catalog and is not affiliated with, endorsed by, or sponsored by any vehicle manufacturer displayed on this page.